| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
The debugging code for kmap_local() doubles the number of per-CPU fixmap
slots allocated for kmap_local(), in order to use half of them as guard
regions. This causes the fixmap region to grow downwards beyond the start
of its reserved window if the supported number of CPUs is large, and collide
with the newly added virtual DT mapping right below it, which is obviously
not good.
One manifestation of this is EFI boot on a kernel built with NR_CPUS=32
and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting
in block entries below the fixmap region that the fixmap code misidentifies
as fixmap table entries, and subsequently tries to dereference using a
phys-to-virt translation that is only valid for lowmem. This results in a
cryptic splat such as the one below.
ftrace: allocating 45548 entries in 89 pages
8<--- cut here ---
Unable to handle kernel paging request at virtual address fc6006f0
pgd = (ptrval)
[fc6006f0] *pgd=80000040207003, *pmd=00000000
Internal error: Oops: a06 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382
Hardware name: Generic DT based system
PC is at cpu_ca15_set_pte_ext+0x24/0x30
LR is at __set_fixmap+0xe4/0x118
pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3
sp : c1601ed8 ip : 00400000 fp : 00800000
r10: 0000071f r9 : 00421000 r8 : 00c00000
r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f
r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 30c5387d Table: 40203000 DAC: 00000001
Process swapper (pid: 0, stack limit = 0x(ptrval))
So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also,
fix the BUILD_BUG_ON() check that was supposed to catch this, by checking
whether the region grows below the start address rather than above the end
address. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use correct permission flag for mixed signed bounds arithmetic
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: keep alloc_hash updated after hash allocation
In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
I moved cp->hash calculation before the first
tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched.
This difference could lead to another out of bound access.
cp->alloc_hash should always be the size allocated, we should
update it after this tcindex_alloc_perfect_hash(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: aspeed: fix clock handling logic
Video engine uses eclk and vclk for its clock sources and its reset
control is coupled with eclk so the current clock enabling sequence works
like below.
Enable eclk
De-assert Video Engine reset
10ms delay
Enable vclk
It introduces improper reset on the Video Engine hardware and eventually
the hardware generates unexpected DMA memory transfers that can corrupt
memory region in random and sporadic patterns. This issue is observed
very rarely on some specific AST2500 SoCs but it causes a critical
kernel panic with making a various shape of signature so it's extremely
hard to debug. Moreover, the issue is observed even when the video
engine is not actively used because udevd turns on the video engine
hardware for a short time to make a query in every boot.
To fix this issue, this commit changes the clock handling logic to make
the reset de-assertion triggered after enabling both eclk and vclk. Also,
it adds clk_unprepare call for a case when probe fails.
clk: ast2600: fix reset settings for eclk and vclk
Video engine reset setting should be coupled with eclk to match it
with the setting for previous Aspeed SoCs which is defined in
clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
driver. Also, reset bit 6 is defined as 'Video Engine' reset in
datasheet so it should be de-asserted when eclk is enabled. This
commit fixes the setting. |
| The issue was addressed with improved checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.8, macOS Sonoma 14.8.7, macOS Sonoma 14.8.8, macOS Tahoe 26.5, visionOS 26.5. Processing a maliciously crafted file may lead to unexpected app termination. |
| An OS command injection vulnerability in Ivanti EPMM before 12.9.0.1, 12.8.0.3 and 12.7.0.2 versions allows a remote authenticated attacker to execute arbitrary commands as root |
| Inappropriate implementation in XML in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Views in Google Chrome on Mac prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Low) |
| The Advanced Form Integration — Connect Forms to 200+ Apps WordPress plugin before 2.1.1 does not restrict the WordPress role assigned when it creates a user from a public form submission, allowing unauthenticated visitors to create an administrator account when an active integration maps the user role to a public form field. This requires a specific, non-default multi-Advanced Form Integration — Connect Forms to 200+ Apps WordPress plugin before 2.1.1 configuration. |
| The Minifilter communication port for driver `GFAC_Sys_x64.sys` in Little Orbit GFAC allows a local attacker to access privileged driver functionality via a communication interface that lacks appropriate access restrictions. |
| An improper validation vulnerability for driver `GFAC_Sys_x64.sys` in Little Orbit GFAC allows a local attacker to escalate privileges to SYSTEM and execute arbitrary code in kernel mode via crafted messages sent through a Minifilter communication port. |
| A malicious actor with access to the network could exploit a Path Traversal vulnerability found in certain devices running UniFi OS to bypass authentication of such UniFi OS devices or instances. |
| The Notifications for Forms & WordPress Actions WordPress plugin before 2.6 does not validate a user-supplied value before using it to build a server-side file inclusion path, allowing authenticated users with subscriber-level access and above to include and execute arbitrary local PHP files on the server. |
| The Ultimate Member WordPress plugin before 2.12.0 does not properly sanitise and escape the value of custom textarea profile fields before outputting it on user profiles, allowing authenticated users with Subscriber-level access and above to store JavaScript that executes when any user, including an administrator, views the affected profile. |
| The Frontend File Manager Plugin WordPress plugin through 23.6 does not validate a file path derived from user input before deleting the referenced file, allowing unauthenticated users to delete arbitrary files on the server (such as wp-config.php) when guest upload mode is enabled. Deleting wp-config.php forces the site into its setup routine, which can be leveraged toward a full site takeover. |
| The Appointment Booking Calendar Plugin and Scheduling Plugin WordPress plugin through 1.1.28 does not validate data before passing it to a PHP deserialization function, allowing unauthenticated attackers to inject arbitrary PHP objects; where a suitable gadget chain is present on the site this can be leveraged to achieve remote code execution. |
| In Adalo’s no-code app builder, (Versions 1 and 2) the attackers may extract full user records and correlate user behavior across multiple applications via dbId enumeration. The platform does not implement data minimization, privacy by design, or implement appropriate technical safeguards, allowing sensitive information to be exposed to unauthorized parties. |
| Use after free in Forms in Google Chrome prior to 150.0.7871.115 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| The Everest Forms WordPress plugin before 3.5.0 does not reliably delete temporary CSV files generated during email-notification processing and leaves them publicly accessible in the uploads directory, allowing unauthenticated attackers to retrieve other users' form submission records via predictable, enumerable filenames. |
