| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ory Kratos is an identity, user management and authentication system for cloud services. Prior to version 1.3.0, given a number of preconditions, the `highest_available` setting will incorrectly assume that the identity’s highest available AAL is `aal1` even though it really is `aal2`. This means that the `highest_available` configuration will act as if the user has only one factor set up, for that particular user. This means that they can call the settings and whoami endpoint without a `aal2` session, even though that should be disallowed. An attacker would need to steal or guess a valid login OTP of a user who has only OTP for login enabled and who has an incorrect `available_aal` value stored, to exploit this vulnerability. All other aspects of the session (e.g. the session’s aal) are not impacted by this issue. On the Ory Network, only 0.00066% of registered users were affected by this issue, and most of those users appeared to be test users. Their respective AAL values have since been updated and they are no longer vulnerable to this attack. Version 1.3.0 is not affected by this issue. As a workaround, those who require MFA should disable the passwordless code login method. If that is not possible, check the sessions `aal` to identify if the user has `aal1` or `aal2`. |
| Socialstream is a third-party package for Laravel Jetstream. It replaces the published authentication and profile scaffolding provided by Laravel Jetstream, with scaffolding that has support for Laravel Socialite. When linking a social account to an already authenticated user, the lack of a confirmation step introduces a security risk. This is exacerbated if ->stateless() is used in the Socialite configuration, bypassing state verification and making the exploit easier. Developers should ensure that users explicitly confirm account linking and avoid configurations that skip critical security checks. Socialstream v6.2 introduces a new custom route that requires a user to "Confirm" or "Deny" a request to link a social account. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability has been identified in SINAMICS S200 (All versions with serial number beginning with SZVS8, SZVS9, SZVS0 or SZVSN and the FS number is 02). The affected device contains an unlocked bootloader. This security oversight enables attackers to inject malicious code, or install untrusted firmware. The intrinsic security features designed to protect against data manipulation and unauthorized access are compromised when the bootloader is not secured. |
| An authentication bypass vulnerability could allow an attacker to access API functions without authentication. |
| Chef InSpec versions up to 5.23 and before 7.0.107 creates named pipes with overly permissive default Windows access controls. A local attacker may interfere with the pipe connection process and exploit the insufficient access restrictions to assume the InSpec execution context, potentially resulting in elevated privileges or operational disruption.
This issue affects Chef Inspec: through 5.23 and before 7.0.107 |
| ReCrystallize Server 5.10.0.0 uses a authorization mechanism that relies on the value of a cookie, but it does not bind the cookie value to a session ID. Attackers can easily modify the cookie value, within a browser or by implementing client-side code outside of a browser. Attackers can bypass the authentication mechanism by modifying the cookie to contain an expected value. |
| Cobbler, a Linux installation server that allows for rapid setup of network installation environments, has an improper authentication vulnerability starting in version 3.0.0 and prior to versions 3.2.3 and 3.3.7. `utils.get_shared_secret()` always returns `-1`, which allows anyone to connect to cobbler XML-RPC as user `''` password `-1` and make any changes. This gives anyone with network access to a cobbler server full control of the server. Versions 3.2.3 and 3.3.7 fix the issue. |
| A weakness has been identified in joey-zhou xiaozhi-esp32-server-java up to 3.0.0. This impacts the function tryAuthenticateWithCookies of the file AuthenticationInterceptor.java of the component Cookie Handler. Executing manipulation can lead to improper authentication. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. Upgrading to version 4.0.0 will fix this issue. It is recommended to upgrade the affected component. |
| OGP-Website installs prior git commit 52f865a4fba763594453068acf8fa9e3fc38d663 are affected by a type juggling flaw which if exploited can result in authentication bypass without knowledge of the victim account's password. |
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. |
| A vulnerability was found in Alteryx Server. Affected by this issue is some unknown functionality of the file /gallery/api/status/. Performing manipulation results in improper authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 2023.1.1.13.486, 2023.2.1.10.293, 2024.1.1.9.236, 2024.2.1.6.125 and 2025.1.1.1.31 can resolve this issue. Upgrading the affected component is recommended. |
| An issue was discovered in Dynamicweb before 9.12.8. An attacker can add a new administrator user without authentication. This flaw exists due to a logic issue when determining if the setup phases of the product can be run again. Once an attacker is authenticated as the new admin user they have added, it is possible to upload an executable file and achieve command execution. This is fixed in 9.5.9, 9.6.16, 9.7.8, 9.8.11, 9.9.8, 9.10.18, 9.12.8, and 9.13.0 (and later). |
| Permission vulnerability in the mobile application (com.afmobi.boomplayer) may lead to the risk of unauthorized operation. |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
| Improper Authentication vulnerability in WF Steuerungstechnik GmbH airleader MASTER allows Authentication Bypass.This issue affects airleader MASTER: 3.00571. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. A vulnerability present in versions 0.9.10 through 0.9.16 allows a user to authenticate to a Linux host via Himmelblau using an *invalid* Linux Hello PIN, provided the host is offline. While the user gains access to the local system, Single Sign-On (SSO) fails due to the network being down and the inability to issue tokens (due to a failure to unlock the Hello key). The core issue lies in an incorrect assumption within the `acquire_token_by_hello_for_business_key` function: it was expected to return a `TPMFail` error for an invalid Hello key when offline, but instead, a preceding nonce request resulted in a `RequestFailed` error, leading the system to erroneously transition to an offline success state without validating the Hello key unlock. This impacts systems using Himmelblau for authentication when operating in an offline state with Hello PIN authentication enabled. Rocky Linux 8 (and variants) are not affected by this vulnerability. The problem is resolved in Himmelblau version 0.9.17. A workaround is available for users who cannot immediately upgrade. Disabling Hello PIN authentication by setting `enable_hello = false` in `/etc/himmelblau/himmelblau.conf` will mitigate the vulnerability. |
| A vulnerability was found in rowboatlabs rowboat up to 8096eaf63b5a0732edd8f812bee05b78e214ee97. It has been rated as critical. Affected by this issue is the function PUT of the file apps/rowboat/app/api/uploads/[fileId]/route.ts of the component Session Handler. The manipulation of the argument params leads to missing authentication. The attack may be launched remotely. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. It is expected that this issue will be fixed in the near future. |
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
| Hikka is a Telegram userbot. A vulnerability affects all users of versions below 1.6.2, including most of the forks. It allows an unauthenticated attacker to gain access to Telegram account of a victim, as well as full access to the server. The issue is patched in version 1.6.2. No known workarounds are available. |
| Hikka, a Telegram userbot, has vulnerability affects all users on all versions of Hikka. Two scenarios are possible. 1. Web interface does not have an authenticated session: attacker can use his own Telegram account to gain RCE to the server by authorizing in the dangling web interface. 2. Web interface does have an authenticated session: due to insufficient warning in the authentication message, users were tempted to click "Allow" in the "Allow web application ops" menu. This gave an attacker access not only to remote code execution, but also to Telegram accounts of owners. Scenario number 2 is known to have been exploited in the wild. No known patches are available, but some workarounds are available. Use `--no-web` flag and do not start userbot without it; after authorizing in the web interface, close the port on the server and/or start the userbot with `--no-web` flag; and do not click "Allow" in your helper bot unless it is your explicit action that needs to be allowed. |
