| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Remove WO permissions on second-level paging entries
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7915: fix txrate reporting
Properly check rate_info to fix unexpected reporting.
[ 1215.161863] Call trace:
[ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211]
[ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211]
[ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211]
[ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e]
[ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e]
[ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e]
[ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76]
[ 1215.201276] __napi_poll+0x38/0xf8
[ 1215.204668] napi_workfn+0x40/0x80
[ 1215.208062] process_one_work+0x1fc/0x390
[ 1215.212062] worker_thread+0x48/0x4d0
[ 1215.215715] kthread+0x120/0x128
[ 1215.218935] ret_from_fork+0x10/0x1c |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memcontrol: slab: fix obtain a reference to a freeing memcg
Patch series "Use obj_cgroup APIs to charge kmem pages", v5.
Since Roman's series "The new cgroup slab memory controller" applied.
All slab objects are charged with the new APIs of obj_cgroup. The new
APIs introduce a struct obj_cgroup to charge slab objects. It prevents
long-living objects from pinning the original memory cgroup in the
memory. But there are still some corner objects (e.g. allocations
larger than order-1 page on SLUB) which are not charged with the new
APIs. Those objects (include the pages which are allocated from buddy
allocator directly) are charged as kmem pages which still hold a
reference to the memory cgroup.
E.g. We know that the kernel stack is charged as kmem pages because the
size of the kernel stack can be greater than 2 pages (e.g. 16KB on
x86_64 or arm64). If we create a thread (suppose the thread stack is
charged to memory cgroup A) and then move it from memory cgroup A to
memory cgroup B. Because the kernel stack of the thread hold a
reference to the memory cgroup A. The thread can pin the memory cgroup
A in the memory even if we remove the cgroup A. If we want to see this
scenario by using the following script. We can see that the system has
added 500 dying cgroups (This is not a real world issue, just a script
to show that the large kmallocs are charged as kmem pages which can pin
the memory cgroup in the memory).
#!/bin/bash
cat /proc/cgroups | grep memory
cd /sys/fs/cgroup/memory
echo 1 > memory.move_charge_at_immigrate
for i in range{1..500}
do
mkdir kmem_test
echo $$ > kmem_test/cgroup.procs
sleep 3600 &
echo $$ > cgroup.procs
echo `cat kmem_test/cgroup.procs` > cgroup.procs
rmdir kmem_test
done
cat /proc/cgroups | grep memory
This patchset aims to make those kmem pages to drop the reference to
memory cgroup by using the APIs of obj_cgroup. Finally, we can see that
the number of the dying cgroups will not increase if we run the above test
script.
This patch (of 7):
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get (which is in the
refill_stock when cached memcg changed) to memcg.
rcu_read_lock()
memcg = obj_cgroup_memcg(old)
__memcg_kmem_uncharge(memcg)
refill_stock(memcg)
if (stock->cached != memcg)
// css_get can change the ref counter from 0 back to 1.
css_get(&memcg->css)
rcu_read_unlock()
This fix is very like the commit:
eefbfa7fd678 ("mm: memcg/slab: fix use after free in obj_cgroup_charge")
Fix this by holding a reference to the memcg which is passed to the
__memcg_kmem_uncharge() before calling __memcg_kmem_uncharge(). |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix cwnd update ordering
After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.
The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Disable preemption when probing user return MSRs
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix masking negation logic upon negative dst register
The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: fix vm_flags for virtqueue doorbell mapping
The virtqueue doorbell is usually implemented via registeres but we
don't provide the necessary vma->flags like VM_PFNMAP. This may cause
several issues e.g when userspace tries to map the doorbell via vhost
IOTLB, kernel may panic due to the page is not backed by page
structure. This patch fixes this by setting the necessary
vm_flags. With this patch, try to map doorbell via IOTLB will fail
with bad address. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
RIP: 0010:kmem_cache_free+0xfa/0x1b0
Call Trace:
qla2xxx_mqueuecommand+0x2b5/0x2c0 [qla2xxx]
scsi_queue_rq+0x5e2/0xa40
__blk_mq_try_issue_directly+0x128/0x1d0
blk_mq_request_issue_directly+0x4e/0xb0
Fix incorrect call to free srb in qla2xxx_mqueuecommand(), as srb is now
allocated by upper layers. This fixes smatch warning of srb unintended
free. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Return correct error code from smb2_get_enc_key
Avoid a warning if the error percolates back up:
[440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key
[440700.386947] ------------[ cut here ]------------
[440700.386948] err = 1
[440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70
...
[440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu
...
[440700.397334] Call Trace:
[440700.397346] __filemap_set_wb_err+0x1a/0x70
[440700.397419] cifs_writepages+0x9c7/0xb30 [cifs]
[440700.397426] do_writepages+0x4b/0xe0
[440700.397444] __filemap_fdatawrite_range+0xcb/0x100
[440700.397455] filemap_write_and_wait+0x42/0xa0
[440700.397486] cifs_setattr+0x68b/0xf30 [cifs]
[440700.397493] notify_change+0x358/0x4a0
[440700.397500] utimes_common+0xe9/0x1c0
[440700.397510] do_utimes+0xc5/0x150
[440700.397520] __x64_sys_utimensat+0x88/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM reservation for seal/unseal
The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal
and unseal operations") was correct on the mailing list:
https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/
But somehow got rebased so that the tpm_try_get_ops() in
tpm2_seal_trusted() got lost. This causes an imbalanced put of the
TPM ops and causes oopses on TIS based hardware.
This fix puts back the lost tpm_try_get_ops() |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nftables: clone set element expression template
memcpy() breaks when using connlimit in set elements. Use
nft_expr_clone() to initialize the connlimit expression list, otherwise
connlimit garbage collector crashes when walking on the list head copy.
[ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount]
[ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83
[ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297
[ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000
[ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0
[ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c
[ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001
[ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000
[ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000
[ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0
[ 493.064733] Call Trace:
[ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount]
[ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
ch_ktls: Fix kernel panic
Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
The debugging code for kmap_local() doubles the number of per-CPU fixmap
slots allocated for kmap_local(), in order to use half of them as guard
regions. This causes the fixmap region to grow downwards beyond the start
of its reserved window if the supported number of CPUs is large, and collide
with the newly added virtual DT mapping right below it, which is obviously
not good.
One manifestation of this is EFI boot on a kernel built with NR_CPUS=32
and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting
in block entries below the fixmap region that the fixmap code misidentifies
as fixmap table entries, and subsequently tries to dereference using a
phys-to-virt translation that is only valid for lowmem. This results in a
cryptic splat such as the one below.
ftrace: allocating 45548 entries in 89 pages
8<--- cut here ---
Unable to handle kernel paging request at virtual address fc6006f0
pgd = (ptrval)
[fc6006f0] *pgd=80000040207003, *pmd=00000000
Internal error: Oops: a06 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382
Hardware name: Generic DT based system
PC is at cpu_ca15_set_pte_ext+0x24/0x30
LR is at __set_fixmap+0xe4/0x118
pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3
sp : c1601ed8 ip : 00400000 fp : 00800000
r10: 0000071f r9 : 00421000 r8 : 00c00000
r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f
r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
Control: 30c5387d Table: 40203000 DAC: 00000001
Process swapper (pid: 0, stack limit = 0x(ptrval))
So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also,
fix the BUILD_BUG_ON() check that was supposed to catch this, by checking
whether the region grows below the start address rather than above the end
address. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use correct permission flag for mixed signed bounds arithmetic
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
media: aspeed: fix clock handling logic
Video engine uses eclk and vclk for its clock sources and its reset
control is coupled with eclk so the current clock enabling sequence works
like below.
Enable eclk
De-assert Video Engine reset
10ms delay
Enable vclk
It introduces improper reset on the Video Engine hardware and eventually
the hardware generates unexpected DMA memory transfers that can corrupt
memory region in random and sporadic patterns. This issue is observed
very rarely on some specific AST2500 SoCs but it causes a critical
kernel panic with making a various shape of signature so it's extremely
hard to debug. Moreover, the issue is observed even when the video
engine is not actively used because udevd turns on the video engine
hardware for a short time to make a query in every boot.
To fix this issue, this commit changes the clock handling logic to make
the reset de-assertion triggered after enabling both eclk and vclk. Also,
it adds clk_unprepare call for a case when probe fails.
clk: ast2600: fix reset settings for eclk and vclk
Video engine reset setting should be coupled with eclk to match it
with the setting for previous Aspeed SoCs which is defined in
clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
driver. Also, reset bit 6 is defined as 'Video Engine' reset in
datasheet so it should be de-asserted when eclk is enabled. This
commit fixes the setting. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset
and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set'
rule run at the same time.
Previous patches made it safe to run individual reset handlers concurrently
so commit_mutex is no longer required to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| libcurl might in some circumstances reuse the wrong connection when asked to
do Negotiate-authenticated ones, even when they are set to use different
'services'.
libcurl features a pool of recent connections so that subsequent requests can
reuse an existing connection to avoid overhead.
When reusing a connection a range of criteria must be met. Due to a logical
error in the code, a request that was issued by an application could
wrongfully reuse an existing connection to the same server that was
authenticated using different services. |
| Vulnerability in the Oracle Access Manager product of Oracle Fusion Middleware (component: Authentication Engine). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Access Manager. While the vulnerability is in Oracle Access Manager, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Access Manager accessible data. CVSS 3.1 Base Score 8.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:N/A:N). |
