| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When specific platforms are using Arista EOS with a loose Unicast Reverse Path Forwarding (uRPF) configuration, certain traffic may not be subjected to the intended verification drop. Consequently, traffic that should be dropped based on these routes could still be processed and forwarded by the device.
This issue was discovered internally by Arista and the company is not aware of any malicious uses of this issue in customer networks. |
| A specially crafted packet can cause the premature expiry of multicast forwarding state on affected interfaces, potentially resulting in temporary multicast traffic loss during the affected period. |
| On affected platforms running Arista EOS, an unauthenticated attacker who is network-adjacent to the switch and able to connect to a device with PIM Sparse Mode and MLAG configured, can send malformed messages that cause the Pimsm agent to terminate unexpectedly. The Pimsm agent is automatically restarted, but repeated attacks can cause the agent to restart continuously, resulting in a sustained denial of service. |
| The VeloCloud Edge and Gateway exhibit an out-of-bounds write vulnerability when processing tunneled IP fragments between authenticated overlay neighbors. This vulnerability impacts the VeloCloud VCMP tunnel protocol only.
A successful exploit can cause the affected process to terminate and restart, leading to a temporary disruption of traffic. Hosts on the internet that are unauthenticated and unable to form an overlay peer relationship can not trigger the vulnerable logic. |
| yshop-crm through 2.1.3 fails to enforce authorization on the sendSms and sendMail endpoints in CrmCustomerController, allowing any authenticated back-office user to send SMS and email to arbitrary customers. Attackers can invoke POST /admin-api/crm/customer/send-sms and POST /admin-api/crm/customer/send-mail with arbitrary customerIds, templateCode, and templateParams to deliver unauthorized messages through the organization's SMS and email channels. |
| yshop-crm through 2.1.3 fails to enforce authorization on the saveRedisSet and getRedisSet endpoints in CrmCustomerController, allowing any authenticated back-office user to read and modify installation-wide lead-allocation and customer auto-recycling policy. Attackers can invoke these endpoints to manipulate shared Redis keys controlling customer auto-recycling behavior, causing mass customer data deletion, disabling lead recycling, or blocking customer creation across the deployment. |
| yshop-crm through 2.1.3 contains a missing authorization vulnerability in the CrmInvoiceController issueInvoice endpoint that allows authenticated back-office users to issue arbitrary invoices. Attackers can call the PUT /admin-api/crm/invoice/issue endpoint without required permissions to modify invoice status, inflate contract invoiced amounts with attacker-chosen values, and trigger invoice emails to arbitrary addresses. |
| yshop-crm through 2.1.3 contains a missing authorization vulnerability in the StoreProductController onSale handler that allows authenticated back-office users to modify product sale status. Attackers can invoke the GET /admin-api/product/store-product/sale endpoint with sequential product IDs to withdraw entire product catalogs from sale or re-enable withdrawn products without proper permission checks. |
| yshop-crm through 2.1.3 contains a missing authorization vulnerability in the CrmCluesController receiveCustomer endpoint that allows authenticated back-office users to claim sales leads without proper permission checks. Attackers can invoke the lead-claim endpoint to reassign leads from other employees to themselves by overwriting the ownerUserId field, with no access logging or quota validation to prevent bulk lead theft. |
| yshop-crm through 2.1.3 fails to enforce authorization on the GET /admin-api/crm/operatelog/page endpoint, allowing any authenticated back-office user to access the installation-wide audit trail. Attackers can query the operation log to retrieve operator names, display nicknames, client IP addresses, User-Agent strings, request URLs, action details, and customer identifiers without proper permission checks. |
| yshop-crm through 2.1.3 contains a missing authorization vulnerability in the GET /admin-api/crm/flow/flow-users endpoint that allows any logged-in back-office user to access approval workflow data. Attackers can retrieve approval chain topology, step ordering, approver identifiers, and personal information including login names, nicknames, departments, email addresses, mobile numbers and last login IP addresses. |
| yshop-crm through 2.1.3 fails to enforce authorization checks on the CrmFlowController deleteFlowStep endpoint, allowing any authenticated back-office user to delete arbitrary approval workflow steps. Attackers can invoke the DELETE /admin-api/crm/flow/delete-step endpoint without required permissions to remove approval steps that control contract, receivable, and invoice finalization processes. |
| yshop-crm through 2.1.3 contains an authorization failure in the GET /admin-api/system/user/page endpoint where the @PreAuthorize annotation is commented out, allowing authenticated back-office users without system:user:list permission to enumerate all users. Attackers with valid back-office credentials and a role with data scope ALL can retrieve the complete user directory including login names, nicknames, departments, email addresses, mobile numbers, and last login information. |
| Nozomi Networks Labs identified a CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in the Modbus transaction management interface of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote authenticated attacker to store malicious script content that executes in the browser of any administrator who later opens an affected management page. |
| Nozomi Networks Labs identified a CWE-319: Cleartext Transmission of Sensitive Information vulnerability in the edgserver management protocol of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a network-adjacent passive observer to intercept management traffic and recover sensitive device identity and network metadata in cleartext. |
| The OAuth authorization endpoint in Jenkins Bitbucket Server Integration Plugin 6.0.1 and earlier reads the `oauth_callback` URL from the submitted form rather than from the server-side stored request token, allowing attackers to hijack the OAuth flow and obtain an access token on behalf of the victim. |
| @fastify/auth is a Fastify plugin that composes multiple authentication and authorization strategies into a single route guard. In versions 5.0.0 through 5.1.0, when strategies are composed with the relation "or" option together with the run "all" option and one entry is a nested array acting as an AND group, the group is evaluated in an order-dependent way: an earlier failing check is silently dropped and the group's result becomes the outcome of its last check. As a result, a request that satisfies only the last member of an AND group, for example an attacker who holds a valid API key but is not an administrator, is authorized instead of rejected, and a related order-dependent bypass affects the mirror configuration where the top-level relation is "and" and a nested group uses "or". The issue is fixed in @fastify/auth 5.1.1, and users should upgrade to 5.1.1 or later. As a workaround, omit the run "all" option where it is not required, order each AND group so its stricter check is evaluated last, or replace nested AND groups with an explicit top-level "and" composition. |
| A vulnerability in Datagram TLS (DTLS) message handling of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Secure Firewall 3100 Series and 4200 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper resource management when processing certain DTLS messages. An attacker could exploit this vulnerability by sending a crafted stream of DTLS traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in an API of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to read specific files on the underlying operating system of an affected device.
This vulnerability is due to improper restriction of XML external entity references. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to read specific files on the affected system that the underlying process has permission to access. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the live (WebSocket) transport authorizes a mount via `check_view_auth`, not Django's `View.dispatch()` chain. As a result, standard Django authorization — `LoginRequiredMixin`, `PermissionRequiredMixin`, `UserPassesTestMixin`, `@method_decorator(login_required, name="dispatch")`, and custom `dispatch()` guards — and the djust admin extension's staff gate (applied only in the HTTP `as_view` wrapper) were enforced on the initial HTTP GET but silently bypassed over WebSocket, where all events and state flow. An anonymous or under-privileged client could open a WebSocket and mount such a view — including admin list/create/change/delete — and dispatch its handlers. This is fixed in djust 1.0.7. `check_view_auth` now honors the Django `AccessMixin` family on every transport; a new system check S004 fails loud at startup on auth patterns the runtime cannot safely replay (decorator/overridden-`dispatch` forms); and the admin base mixin declares `login_required = True` + an active-staff `check_permissions` gate. As a workaround, gate views using djust's `login_required` / `permission_required` / `check_permissions` attributes (honored on all transports) rather than HTTP-only mixins/decorators. |
