| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in spice-vdagent. A malicious or compromised SPICE host can trigger an integer overflow by sending a specially crafted message. This vulnerability can lead to a heap buffer overflow, causing the spice-vdagent daemon to crash and resulting in a Denial of Service (DoS) for the virtual machine. This issue requires the SPICE host to be untrusted or compromised for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Try to fix change_handle ioctl, attempt 4
[airlied: just added some comments on how to reenable]
On-list because the cat is out of the bag and we're clearly not good
enough to figure this out in private. The story thus far:
5e28b7b94408 ("drm: Set old handle to NULL before prime swap in
change_handle") tried to fix a race condition between the gem_close and
gem_change_handle ioctls, but got a few things wrong:
- There's a confusion with the local variable handle, which is actually
the new handle, and so the two-stage trick was actually applied to the
wrong idr slot. 7164d78559b0 ("drm/gem: fix race between
change_handle and handle_delete") tried to fix that by adding yet
another code block, but forgot to add the error handling. Which meant
we now have two paths, both kinda wrong.
- dc366607c41c ("drm: Replace old pointer to new idr") tried to apply
another fix, but inconsistently, again because of the handle confusion
- this would be the right fix (kinda, somewhat, it's a mess) if we'd
do the two-stage approach for the new handle. Except that wasn't the
intent of the original fix.
We also didn't have an igt merged for the original ioctl, which is a big
no-go. This was attempted to address off-list in the original bugfix,
and amd QA people claimed the bug was fixed now. Very clearly that's not
the case. Here's my attempt to sort this out:
- Rename the local variable to new_handle, the old aliasing with
args->handle is just too dangerously confusing.
- Merge the gem obj lookup with the two-stage idr_replace so that we
avoid getting ourselves confused there.
- This means we don't have a surplus temporary reference anymore, only
an inherited from the idr. A concurrent gem_close on the new_handle
could steal that. Fix that with the same two-stage approach
create_tail uses. This is a bit overkill as documented in the comment,
but I also don't trust my ability to understand this all correctly, so
go with the established pattern we have from other ioctls instead for
maximum paranoia.
- Adjust error paths. I've tried to make the error and success paths
common, because they are identical except for which handle is removed
and on which we call idr_replace to (re)install the object again. But
that made things messier to read, so I've left it at the more verbose
version, which unfortunately hides the symmetry in the entire code
flow a bit.
- While at it, also replace the 7 space indent with 1 tab.
And finally, because I flat out don't trust my abilities here at all
anymore:
- Disable the ioctl until we have the igt situation and everything else
sorted out on-list and with full consensus.
v2:
Sashiko noticed that I didn't handle the error path for idr_replace
correctly, it must be checked with IS_ERR_OR_NULL like in
gem_handle_delete. So yeah, definitely should just the existing paths
1:1 because this is endless amounts of tricky.
Also add the Fixes: line for the original ioctl, I forgot that too. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..] |
| A flaw was found in Poppler's Splash backend. A remote attacker could exploit this vulnerability by crafting a malicious PDF file that, when rendered, triggers an integer overflow in the `tilingPatternFill` function. This overflow leads to an undersized heap memory allocation, allowing a subsequent out-of-bounds write. Successful exploitation could result in arbitrary code execution, information disclosure, or denial of service within the context of the application processing the PDF. |
| A flaw was found in the Pen Drive report generator. Cluster-sourced data is rendered into HTML reports without proper escaping or sanitization. An attacker with cluster administrator privileges can inject a stored cross-site scripting (XSS) payload into cluster objects (such as ClusterVersion spec.channel) that executes in the browser of any user who opens the generated HTML report. |
| A flaw in Node.js TLS hostname handling can cause Node.js unicode dot separator handling can lead to tls wildcard-depth authentication bypass due to resolver and verifier hostname normalization mismat.
This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| A flaw in Node.js WebCrypto implementation can crash the process if the input of `subtle.encrypt()` is a multiple of 2GiB.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| A flaw was found in KubeVirt's virt-handler network cache handling. The WriteToCachedFile function writes data to a launcher-rooted path using os.WriteFile and os.Chown without symlink protection. A user with access to the virt-launcher container can plant a symlink at the cache file path, causing virt-handler to follow it and overwrite an arbitrary host file with JSON content and change its ownership. |
| A flaw was found in KubeVirt's downward metrics virtio-serial server. The server reads guest requests using textproto.Reader.ReadLine(), which buffers input indefinitely until a newline character is received, with no length limit or read deadline. A user with access to a VM guest that has the downward metrics virtio-serial device configured can write a continuous byte stream to the device, causing unbounded memory allocation in the virt-handler process until it is OOM-killed. |
| A flaw was found in Keycloak. This JWT algorithm confusion vulnerability in the JWT Authorization Grant flow allows an attacker with valid client credentials to bypass signature verification. By forging an assertion, the attacker can create unauthorized access tokens. This enables the attacker to impersonate any federated user linked to the affected Identity Provider, leading to unauthorized access and potential privilege escalation. |
| A server-side request forgery (SSRF) flaw was found in KubeVirt's virt-api port-forward handler. When processing a port-forward request to a VirtualMachineInstance (VMI), virt-api reads the target IP from vmi.Status.Interfaces[0].IP and passes it directly to net.Dial() without validation. For VMIs using non-masquerade network bindings (bridge or secondary-only), this IP is reported by the QEMU guest agent running inside the VM and is fully controllable by the VM owner. An attacker with kubevirt.io:edit permissions can create a VM with a modified guest agent that reports an arbitrary IP address, then request port-forward to establish a bidirectional TCP tunnel from virt-api's cluster-internal network position to any routable destination, bypassing NetworkPolicy isolation. |
| A vulnerability was found in OpenJPEG similar to CVE-2019-6988. This flaw allows an attacker to bypass existing protections and cause an application crash through a maliciously crafted file. |
| Multiple out-of-bounds read vulnerabilities were found in GStreamer's pcapparse element. Malformed PCAP records can trigger reads beyond buffer boundaries during IPv4/TCP header parsing. This element is primarily used in debugging pipelines, limiting real-world exposure. A local attacker could trick a user into processing a specially crafted PCAP file, potentially leading to a crash or information disclosure. |
| A flaw was found in Keycloak. A remote attacker with administrative privileges, specifically those with `manage-client` permission or access to client registration endpoints, could bypass client Uniform Resource Identifier (URI) validation. This is achieved by registering a malicious client with a specially crafted redirect URI using a case-insensitive `javascript:` or `data:` scheme. This Cross-Site Scripting (XSS) vulnerability allows for arbitrary code execution in the Keycloak origin when a victim clicks the crafted link, such as in the logout flow or the Admin Console. |
| A flaw was found in dogtag-pki and pki-core. The token authentication scheme can be bypassed with a LDAP injection. By passing the query string parameter sessionID=*, an attacker can authenticate with an existing session saved in the LDAP directory server, which may lead to escalation of privilege. |
| A flaw was found in Keycloak. A missing authorization check in the GroupResource.addChild() endpoint within the Admin REST API allows an authenticated user with limited administrative privileges to reparent any existing group. When Fine-Grained Admin Permissions v2 (FGAPv2) is enabled, an attacker with management rights over a single low-privilege group can reparent a highly privileged group (such as one possessing the realm-admin role) under their managed group.
Because group permissions follow a hierarchical structure, this action unauthorizedly grants the attacker management and password-reset capabilities over the members of the targeted privileged group. An attacker can exploit this to reset an administrator's password, compromise the account, and achieve a full realm takeover, leading to a complete compromise of confidentiality, integrity, and availability. |
| A log injection flaw was found in Keycloak. A text string may be injected through the authentication form when using the WebAuthn authentication mode. This issue may have a minor impact to the logs integrity. |
| A flaw was found in Keycloak. A remote attacker can exploit a Cross-Origin Resource Sharing (CORS) header injection vulnerability in Keycloak's User-Managed Access (UMA) token endpoint. This flaw occurs because the `azp` claim from a client-supplied JSON Web Token (JWT) is used to set the `Access-Control-Allow-Origin` header before the JWT signature is validated. When a specially crafted JWT with an attacker-controlled `azp` value is processed, this value is reflected as the CORS origin, even if the grant is later rejected. This can lead to the exposure of low-sensitivity information from authorization server error responses, weakening origin isolation, but only when a target client is misconfigured with `webOrigins: ["*"]`. |
| A flaw was found in org.keycloak.services. An administrator with delegated access to read group memberships and users can bypass user profile permissions by accessing the group members endpoint. This allows the administrator to view user attributes that are explicitly configured to be denied, leading to information disclosure. |
| A flaw was found in Keycloak. An authenticated attacker can perform Server-Side Request Forgery (SSRF) by manipulating the `client_session_host` parameter during refresh token requests. This occurs when a Keycloak client is configured to use the `backchannel.logout.url` with the `application.session.host` placeholder. Successful exploitation allows the attacker to make HTTP requests from the Keycloak server’s network context, potentially probing internal networks or internal APIs, leading to information disclosure. |
