| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb: leaf: Fix potential infinite loop in command parsers
The `kvaser_usb_leaf_wait_cmd()` and `kvaser_usb_leaf_read_bulk_callback`
functions contain logic to zero-length commands. These commands are used
to align data to the USB endpoint's wMaxPacketSize boundary.
The driver attempts to skip these placeholders by aligning the buffer
position `pos` to the next packet boundary using `round_up()` function.
However, if zero-length command is found exactly on a packet boundary
(i.e., `pos` is a multiple of wMaxPacketSize, including 0), `round_up`
function will return the unchanged value of `pos`. This prevents `pos`
to be increased, causing an infinite loop in the parsing logic.
This patch fixes this in the function by using `pos + 1` instead.
This ensures that even if `pos` is on a boundary, the calculation is
based on `pos + 1`, forcing `round_up()` to always return the next
aligned boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: idmouse: fix an uninit-value in idmouse_open
In idmouse_create_image, if any ftip_command fails, it will
go to the reset label. However, this leads to the data in
bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check
for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this
check only be valid if the data after bulk_in_buffer[HEADER]
has concrete data.
Note that this is found by KMSAN, so only kernel compilation
is tested. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: clean mc addresses in application firmware when closing port
When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.
Now use `__dev_mc_unsync` to clean mc addresses when closing port. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.
In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.
To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.
[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496
[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625] <TASK>
[ 2453.384891] dump_stack_lvl+0x33/0x50
[ 2453.385285] print_report+0xc2/0x610
[ 2453.385667] ? __virt_addr_valid+0xb1/0x130
[ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757] kasan_report+0xae/0xe0
[ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015] ? complete_all+0x43/0xd0
[ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268] ? down_write+0xaa/0x100
[ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170] ? up_write+0x39/0x60
[ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985] auxiliary_bus_remove+0x2e/0x40
[ 2453.406405] device_release_driver_internal+0x243/0x2d0
[ 2453.406900] ? kobject_put+0x42/0x2d0
[ 2453.407284] bus_remove_device+0x128/0x1d0
[ 2453.407687] device_del+0x240/0x550
[ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511] ? kobject_put+0xfa/0x2d0
[ 2453.408889] ? __kmem_cache_free+0x14d/0x280
[ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111] remove_one+0x89/0x130 [mlx5_core]
[ 24
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix an out of bounds error in BIOS parser
The array is hardcoded to 8 in atomfirmware.h, but firmware provides
a bigger one sometimes. Deferencing the larger array causes an out
of bounds error.
commit 4fc1ba4aa589 ("drm/amd/display: fix array index out of bound error
in bios parser") fixed some of this, but there are two other cases
not covered by it. Fix those as well. |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat()
The syzbot reported issue in hfsplus_delete_cat():
[ 70.682285][ T9333] =====================================================
[ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220
[ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220
[ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0
[ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310
[ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810
[ 70.685447][ T9333] do_rmdir+0x964/0xea0
[ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0
[ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0
[ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.687646][ T9333]
[ 70.687856][ T9333] Uninit was stored to memory at:
[ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0
[ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800
[ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600
[ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70
[ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0
[ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30
[ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0
[ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0
[ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.692773][ T9333]
[ 70.692990][ T9333] Uninit was stored to memory at:
[ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0
[ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800
[ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700
[ 70.694911][ T9333] mount_bdev+0x37b/0x530
[ 70.695320][ T9333] hfsplus_mount+0x4d/0x60
[ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0
[ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0
[ 70.696588][ T9333] do_new_mount+0x73e/0x1630
[ 70.697013][ T9333] path_mount+0x6e3/0x1eb0
[ 70.697425][ T9333] __se_sys_mount+0x733/0x830
[ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150
[ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0
[ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.699730][ T9333]
[ 70.699946][ T9333] Uninit was created at:
[ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60
[ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0
[ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0
[ 70.701774][ T9333] allocate_slab+0x30e/0x1390
[ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0
[ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20
[ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0
[ 70.703598][ T9333] alloc_inode+0x82/0x490
[ 70.703984][ T9333] iget_locked+0x22e/0x1320
[ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0
[ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0
[ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700
[ 70.705776][ T9333] mount_bdev+0x37b/0x530
[ 70.706171][ T9333] hfsplus_mount+0x4d/0x60
[ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0
[ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0
[ 70.707444][ T9333] do_new_mount+0x73e/0x1630
[ 70.707865][ T9333] path_mount+0x6e3/0x1eb0
[ 70.708270][ T9333] __se_sys_mount+0x733/0x830
[ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150
[ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0
[ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0
[ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 70.710611][ T9333]
[ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17
[ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 70.712490][ T9333] =====================================================
[ 70.713085][ T9333] Disabling lock debugging due to kernel taint
[ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ...
[ 70.714159][ T9333]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ice_adapter: release xa entry on adapter allocation failure
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store) |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.
If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we
need to call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: efct: Fix possible memleak in efct_device_init()
In efct_device_init(), when efct_scsi_reg_fc_transport() fails,
efct_scsi_tgt_driver_exit() is not called to release memory for
efct_scsi_tgt_driver_init() and causes memleak:
unreferenced object 0xffff8881020ce000 (size 2048):
comm "modprobe", pid 465, jiffies 4294928222 (age 55.872s)
backtrace:
[<0000000021a1ef1b>] kmalloc_trace+0x27/0x110
[<000000004c3ed51c>] target_register_template+0x4fd/0x7b0 [target_core_mod]
[<00000000f3393296>] efct_scsi_tgt_driver_init+0x18/0x50 [efct]
[<00000000115de533>] 0xffffffffc0d90011
[<00000000d608f646>] do_one_initcall+0xd0/0x4e0
[<0000000067828cf1>] do_init_module+0x1cc/0x6a0
... |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/AER: Fix NULL pointer access by aer_info
The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx
will result in kernel panic. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: Fix memleak in nvmem_register()
dev_set_name will alloc memory for nvmem->dev.kobj.name in
nvmem_register, when nvmem_validate_keepouts failed, nvmem's
memory will be freed and return, but nobody will free memory
for nvmem->dev.kobj.name, there will be memleak, so moving
nvmem_validate_keepouts() after device_register() and let
the device core deal with cleaning name in error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()
tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).
static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;
snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...); ^
return 1;
}
We will get below error by cppcheck
sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
for (i = 0; i < TUNING_CTLS_COUNT; i++)
^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
^
This patch cares non match case. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: fix divide by 0 error in calc_lcoefs()
echo max of u64 to cost.model can cause divide by 0 error.
# echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model
divide error: 0000 [#1] PREEMPT SMP
RIP: 0010:calc_lcoefs+0x4c/0xc0
Call Trace:
<TASK>
ioc_refresh_params+0x2b3/0x4f0
ioc_cost_model_write+0x3cb/0x4c0
? _copy_from_iter+0x6d/0x6c0
? kernfs_fop_write_iter+0xfc/0x270
cgroup_file_write+0xa0/0x200
kernfs_fop_write_iter+0x17d/0x270
vfs_write+0x414/0x620
ksys_write+0x73/0x160
__x64_sys_write+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL,
overflow would happen if bps plus IOC_PAGE_SIZE is greater than
ULLONG_MAX, it can cause divide by 0 error.
Fix the problem by setting basecost |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver
After unbinding the driver, another kthread `cros_ec_console_log_work`
is still accessing the device, resulting an UAF and crash.
The driver doesn't unregister the EC device in .remove() which should
shutdown sub-devices synchronously. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix invalid probe error return value
After DME Link Startup, the error return value is set to the MIPI UniPro
GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure
during driver probe, the error code 1 is propagated back to the driver
probe function which must return a negative value to indicate an error,
but 1 is not negative, so the probe is considered to be successful even
though it failed. Subsequently, removing the driver results in an oops
because it is not in a valid state.
This happens because none of the callers of ufshcd_init() expect a
non-negative error code.
Fix the return value and documentation to match actual usage. |
