| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The userspace syscall verifier z_vrfy_mbox_send() in drivers/mbox/mbox_handlers.c validated the nested msg->data/msg->size fields by reading them directly out of live userspace memory, and then forwarded the original, still-mutable userspace struct mbox_msg * pointer to z_impl_mbox_send() and the underlying driver. Between the access check and the driver's use of msg->data, the validated pointer could be replaced, leaving a time-of-check/time-of-use window.
On a system built with CONFIG_USERSPACE, any unprivileged userspace thread may invoke the mbox_send() system call. A second thread sharing the caller's address space can race to overwrite msg->data with a supervisor (kernel) address after the verifier's bounds check has passed but before the driver dereferences it. The driver then reads from the attacker-chosen address in supervisor context (for example memcpy(&data32, msg->data, msg->size) in the NXP mailbox driver, whose bytes are subsequently emitted to the peer mailbox endpoint).
The impact is a userspace-to-supervisor access-control bypass: disclosure of kernel memory contents (high confidentiality impact), or, for an invalid/unmapped target address, a faulting kernel read causing denial of service. The fix snapshots the entire struct mbox_msg into a kernel-stack copy with k_usermode_from_copy() and validates and forwards that immutable copy, closing the race. |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, the Jobs API validate_webhook_url() path fails open on socket.gaierror and does not bind the validated address to the later request. An attacker webhook_url can later resolve to 127.0.0.1, 169.254.169.254, or another internal address. This issue is fixed in version 4.6.58. |
| Grav API plugin before 1.0.16 contains a server-side request forgery vulnerability in webhook delivery that allows attackers to bypass hostname validation by DNS rebinding. Attackers controlling authoritative DNS for a configured webhook hostname can answer validation lookups with public addresses and delivery lookups with private addresses to reach internal network resources. |
| PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.58, JobSubmitRequest.validate_webhook_url() accepts webhook_url when resolution raises socket.gaierror because the exception path uses except socket.gaierror: pass. JobExecutor._send_webhook() later performs a fresh lookup, allowing DNS changes to direct the request to an internal service. This issue is fixed in version 4.6.58. |
| Race condition in V8 in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Race condition in the JavaScript Engine component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix TOCTOU race between smc_listen_out() and listener close
smc_listen_out() reads lsmc->sk.sk_state without the listener lock,
then acquires lock_sock_nested() only after the check passes. This
opens a window where smc_close_active() can transition the listener
to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept
queue, and release the lock, all between the lockless read and the
delayed lock acquisition:
smc_listen_work (smc_hs_wq) smc_close_active()
------------------------------- -------------------------
release_sock(child)
if (sk_state == SMC_LISTEN) TRUE
lock_sock(listener)
sk_state = SMC_CLOSED
smc_close_cleanup_listen()
release_sock(listener)
flush_work(tcp_listen_work)
lock_sock_nested(listener)
smc_accept_enqueue(listener, child) /* child enqueued on dead listener */
smc_close_active() flushes only tcp_listen_work. Work items already
dispatched onto smc_hs_wq for the CLC handshake continue running
unguarded. smc_accept_enqueue() takes a sock_hold() on the child that
is never released, so the child smc_sock, its clcsock, and the
reference all leak. A remote peer that opens TCP connections while the
server calls close() can exhaust kernel memory.
Move lock_sock_nested() to before the sk_state check so that the test
and the enqueue are atomic under the listener lock. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: clear metadata pointer when no timestamp is requested
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: Shut down rtpoll_timer in psi_cgroup_free()
psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath
and can race psi_trigger_destroy() taking down the last rtpoll trigger under
rtpoll_trigger_lock:
psi_schedule_rtpoll_work() psi_trigger_destroy()
rcu_read_lock();
task = rcu_dereference(rtpoll_task);
rcu_assign_pointer(rtpoll_task, NULL);
timer_delete(&rtpoll_timer);
mod_timer(&rtpoll_timer, ...);
rcu_read_unlock();
synchronize_rcu();
kthread_stop(task_to_destroy);
The group can then be freed with the re-armed timer still pending, and
poll_timer_fn() runs on freed memory.
461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling
mechanism") deleted the timer synchronously after the synchronize_rcu(),
which prevented this but raced trigger creation instead: the deletion could
cancel the timer that a new trigger set armed during the grace period and,
as creation also reinitialized the timer at the time, corrupt it.
8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the
initialization into group_init() and the deletion into the locked section,
trading the creation races for the window above.
Neither placement in the destruction path works. A pending timer firing
while the group is alive is harmless though. poll_timer_fn() just wakes the
rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's
lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it
by then. timer_shutdown_sync() because the timer is never armed again. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| Versa SASE Client for Windows versions released between 7.8.7 and 7.9.4 contain a local privilege escalation vulnerability in the audit log export functionality. The client communicates user-controlled file paths to a privileged service, which performs file system operations without impersonating the requesting user. Due to improper privilege handling and a time-of-check time-of-use race condition combined with symbolic link and mount point manipulation, a local authenticated attacker can coerce the service into deleting arbitrary directories with SYSTEM privileges. This can be exploited to delete protected system folders such as C:\\Config.msi and subsequently achieve execution as NT AUTHORITY\\SYSTEM via MSI rollback techniques. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate metadata when processing requests
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: fix tx_hang_reset use-after-free on device removal
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an authentication bypass in the Traefik reverse proxy configuration, allowing at attacker to access administrative endpoints. The Spack upload endpoint can be leveraged for a Time-of-Check to Time-of-Use (TOCTOU) write in combination with a race condition to achieve remote code execution via path loading manipulation, allowing an unauthenticated actor to achieve remote code execution (RCE).This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix race between update_event_fields and, event_define_fields
The following sequence may leads race between event_define_fields()
and update_event_fields():
CPU0 (loads module A) CPU1 (loads module B)
=============================== ===============================
load_module(A) load_module(B)
notifier_call_chain notifier_call_chain
trace_module_notify trace_module_notify
mutex_lock(&event_mutex) trace_event_update_all()
trace_module_add_events(A) down_write(&trace_event_sem)
__register_event(call_A)
__add_event_to_tracers(call_A)
event_define_fields(call_A)
for each f: list_for_each_entry(field,
list_add(&f->link, &class->fields, link)
&class->fields) field = class->fields->next;
Where access to the class->fields is not protected by the event_mutex in
trace_event_update_all().
This produces the following panic:
Unable to handle kernel access ... at virtual address 0000000000000018
pc : update_event_fields+0xf8/0x368
Call trace:
update_event_fields+0xf8/0x368
trace_event_update_all+0x7c/0x2b4
trace_module_notify+0x4c/0x1dc
notifier_call_chain+0x84/0x168
blocking_notifier_call_chain_robust+0x64/0xd4
load_module+0x10c8/0x123c
__arm64_sys_finit_module+0x230/0x31c
Fix by taking event_mutex in trace_event_update_all() before
trace_event_sem. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb027307 ("sctp: walk the list of asoc
safely") was added for. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Use current_context for safe per-CPU buffer swap
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
