Export limit exceeded: 421002 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421002 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421002 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421002 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2007-5894 | 1 Mit | 1 Kerberos 5 | 2026-11-06 | N/A |
| The reply function in ftpd.c in the gssftp ftpd in MIT Kerberos 5 (krb5) does not initialize the length variable when auth_type has a certain value, which has unknown impact and remote authenticated attack vectors. NOTE: the original disclosure misidentifies the conditions under which the uninitialized variable is used. NOTE: the vendor disputes this issue, stating " The 'length' variable is only uninitialized if 'auth_type' is neither the 'KERBEROS_V4' nor 'GSSAPI'; this condition cannot occur in the unmodified source code. | ||||
| CVE-2026-73322 | 1 Apache | 1 Pinot | 2026-11-06 | 6.5 Medium |
| Incorrect Authorization vulnerability in the single-stage query engine of Apache Pinot. When broker access control is enabled, the single-stage query engine authorizes only the table named in the query's FROM clause. The lookup() transform function identifies its dimension table with a string literal argument rather than through the FROM clause, so that table was never included in the authorization check. An authenticated user who is authorized for at least one table can therefore read columns from any dimension table in the cluster, including tables they have no access to, and can retrieve arbitrary rows of it by supplying primary key values directly. Per-principal row-level security filters configured on the dimension table are likewise not applied. The multi-stage query engine is not affected. This issue affects Apache Pinot: through 1.5.1 Users are recommended to upgrade to version 1.6.0, which fixes this issue. | ||||
| CVE-2026-72481 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: ak8975: fix potential kernel stack memory leak Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to distinguish from a returned error code. | ||||
| CVE-2026-72447 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: hold socket lock when dumping endpoints in sctp_diag SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing address list access during dump - Reworking sctp_for_each_endpoint() to support restart-based traversal with (net, pos) tracking Also: - Add WARN_ON_ONCE() for inconsistent address counts - Fix idiag_states filtering for LISTEN vs association cases - Skip dumping endpoints being freed (ep->base.dead) - Move dump position tracking into iterator, removing cb->args[4] and its comment for sctp_ep_dump()., - Update the comment for cb->args[4] and remove the comment for unused cb->args[5] for sctp_sock_dump(). Note: traversal is restart-based and may re-scan buckets multiple times, but this is acceptable due to small bucket sizes and required to support sleeping-safe callbacks. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative. | ||||
| CVE-2026-72441 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: fix kernel-infoleak in dgram_recvmsg() KMSAN reported a kernel-infoleak in move_addr_to_user(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:131 [inline] BUG: KMSAN: kernel-infoleak in _inline_copy_to_user include/linux/uaccess.h:205 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120 lib/usercopy.c:26 instrument_copy_to_user include/linux/instrumented.h:131 [inline] _inline_copy_to_user include/linux/uaccess.h:205 [inline] _copy_to_user+0xcc/0x120 lib/usercopy.c:26 copy_to_user include/linux/uaccess.h:236 [inline] move_addr_to_user+0x2e7/0x440 net/socket.c:302 ____sys_recvmsg+0x232/0x610 net/socket.c:2925 ... Uninit was stored to memory at: ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline] dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739 The issue occurs because the `pan_id` field of `struct ieee802154_addr` is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`. The execution flow is as follows: 1. `__ieee802154_rx_handle_packet()` declares a local `struct ieee802154_hdr hdr` on the stack. 2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse the source and destination addresses into this structure. 3. If the address mode is `IEEE802154_ADDR_NONE`, `ieee802154_hdr_get_addr()` previously only set the `mode` field, leaving the `pan_id` field containing uninitialized stack memory. 4. This uninitialized `pan_id` is later copied into a `struct sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`. 5. Finally, `move_addr_to_user()` copies the socket address structure to user space, leaking the uninitialized bytes. Fix this by using `memset` to zero out the address structure in `ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. | ||||
| CVE-2026-72437 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry When a read is retried, raid1_read_request() may be called with a pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT read, the bio is completed and the function returns immediately. In this case the existing r1_bio is leaked. This fixes a leak of pre-allocated r1_bio structures for retried reads. | ||||
| CVE-2026-72433 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak This needs to test for nonzero retval. | ||||
| CVE-2026-72428 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. | ||||
| CVE-2026-72413 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix err_chunk memory leaks in INIT handling When sctp_verify_init() encounters unrecognized parameters, it allocates an err_chunk to report them. However, this chunk is leaked in several code paths: 1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after sctp_verify_init() has populated err_chunk, the function returns immediately without freeing it. 2. In sctp_sf_do_unexpected_init(), the same leak occurs on the security_sctp_assoc_request() failure path. 3. In sctp_sf_do_unexpected_init(), on the success path after copying unrecognized parameters to the INIT-ACK, the function returns without freeing err_chunk, unlike sctp_sf_do_5_1B_init() which properly frees it. Fix all three leaks by adding sctp_chunk_free(err_chunk) calls before returning in the error paths and on the success path in sctp_sf_do_unexpected_init(). | ||||
| CVE-2026-72396 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array. | ||||
| CVE-2026-72392 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: <TASK> fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table. | ||||
| CVE-2026-72349 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. | ||||
| CVE-2026-72326 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | ||||
| CVE-2026-72316 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. | ||||
| CVE-2026-72306 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg->complete is false list_del(msg); <- double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section. | ||||
| CVE-2026-72305 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: VDUSE: avoid leaking information to userspace The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace. | ||||
| CVE-2026-72290 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix GISC refcount leak on AIF enable failure kvm_s390_gisc_register() registers the guest ISC before pinning the guest interrupt forwarding pages and allocating the AISB bit. If any of the later setup steps fails, the function unwinds the pinned pages and other local state, but does not unregister the GISC reference. Add the missing kvm_s390_gisc_unregister() to the error unwind path. | ||||
| CVE-2026-72276 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: metronomefb: fix potential memory leak in metronomefb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | ||||
| CVE-2026-72275 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: broadsheetfb: fix potential memory leak in broadsheetfb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | ||||
| CVE-2026-72274 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: hecubafb: fix potential memory leak in hecubafb_probe() The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). | ||||