| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() crashes while holding the dev->lock, the thread
running gether_disconnect() fails to acquire the same lock and spins
forever, resulting in a hardlockup:
Core - Debugging Information for Hardlockup core(7)
Call trace:
queued_spin_lock_slowpath+0x94/0x488
_raw_spin_lock+0x64/0x6c
gether_disconnect+0x19c/0x1e8
ncm_set_alt+0x68/0x1a0
composite_setup+0x6a0/0xc50
The root cause is that the clearing of dev->port_usb in
gether_disconnect() is delayed until the end of the function.
Move the clearing of dev->port_usb to the very beginning of
gether_disconnect() while holding dev->lock. This cuts off the link
immediately, ensuring eth_stop() will see dev->port_usb as NULL and
safely bail out. |
| OpenClaw before 2026.4.10 contains a server-side request forgery vulnerability in browser navigation policy that allows attackers to bypass hostname validation through DNS rebinding attacks. Attackers can exploit inconsistent hostname resolution between validation and actual network requests to pivot to internal resources via unallowlisted hostname URLs. |
| Race in Chromoting in Google Chrome on Windows prior to 148.0.7778.96 allowed a local attacker to perform privilege escalation via a malicious file. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| Memory corruption while creating a process on the digital signal processor due to allocation failure at the kernel level. |
| PackageKit is a a D-Bus abstraction layer that allows the user to manage packages in a secure way using a cross-distro, cross-architecture API. PackageKit between and including versions 1.0.2 and 1.3.4 is vulnerable to a time-of-check time-of-use (TOCTOU) race condition on transaction flags that allows unprivileged users to install packages as root and thus leads to a local privilege escalation. This is patched in version 1.3.5.
A local unprivileged user can install arbitrary RPM packages as root, including executing RPM scriptlets, without authentication. The vulnerability is a TOCTOU race condition on `transaction->cached_transaction_flags` combined with a silent state-machine guard that discards illegal backward transitions while leaving corrupted flags in place. Three bugs exist in `src/pk-transaction.c`:
1. Unconditional flag overwrite (line 4036): `InstallFiles()` writes caller-supplied flags to `transaction->cached_transaction_flags` without checking whether the transaction has already been authorized/started. A second call blindly overwrites the flags even while the transaction is RUNNING.
2. Silent state-transition rejection (lines 873–882): `pk_transaction_set_state()` silently discards backward state transitions (e.g. `RUNNING` → `WAITING_FOR_AUTH`) but the flag overwrite at step 1 already happened. The transaction continues running with corrupted flags.
3. Late flag read at execution time (lines 2273–2277): The scheduler's idle callback reads cached_transaction_flags at dispatch time, not at authorization time. If flags were overwritten between authorization and execution, the backend sees the attacker's flags. |
| A vulnerability has been found in chatchat-space Langchain-Chatchat up to 0.3.1.3. Impacted is the function files of the file libs/chatchat-server/chatchat/server/api_server/openai_routes.py of the component OpenAI-Compatible File Upload API. Such manipulation of the argument file.filename leads to time-of-check time-of-use. Access to the local network is required for this attack to succeed. The attack requires a high level of complexity. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper privilege management in the log rotation mechanism of the Skylight Workspace Config Service in Amazon WorkSpaces for Windows before 2.6.2034.0 allows a local non-admin authenticated user to place arbitrary files into arbitrary locations bypassing file system permission protections, leading to local privilege escalation to SYSTEM. |
| OpenClaw before 2026.4.10 contains a time-of-check-time-of-use vulnerability in the validateScriptFileForShellBleed function that allows local attackers to bypass workspace boundary checks. An attacker with workspace write access can race-condition swap the target file between validation and preflight read, causing the validator to inspect a different file identity than the one that passed the initial boundary check. |
| A vulnerability has been found in PrefectHQ prefect up to 3.6.28.dev1. Affected by this vulnerability is the function validate_restricted_url of the component Webhook/Notification. The manipulation leads to time-of-check time-of-use. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 3.6.28.dev2 addresses this issue. The identifier of the patch is 7c70ac54a5e101431d83b9f2681ec88d5e0021ed. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability in the tail utility of uutils coreutils allows for the exfiltration of sensitive file contents when using the --follow=name option. Unlike GNU tail, the uutils implementation continues to monitor a path after it has been replaced by a symbolic link, subsequently outputting the contents of the link's target. In environments where a privileged user (e.g., root) monitors a log directory, a local attacker with write access to that directory can replace a log file with a symlink to a sensitive system file (such as /etc/shadow), causing tail to disclose the contents of the sensitive file. |
| A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the split utility of uutils coreutils. The program attempts to prevent data loss by checking for identity between input and output files using their file paths before initiating the split operation. However, the utility subsequently opens the output file with truncation after this path-based validation is complete. A local attacker with write access to the directory can exploit this race window by manipulating mutable path components (e.g., swapping a path with a symbolic link). This can cause split to truncate and write to an unintended target file, potentially including the input file itself or other sensitive files accessible to the process, leading to permanent data loss. |
| A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the chcon utility of uutils coreutils during recursive operations. The implementation resolves recursive targets using a fresh path lookup (via fts_accpath) rather than binding the traversal and label application to the specific directory state encountered during traversal. Because these operations are not anchored to file descriptors, a local attacker with write access to a directory tree can exploit timing-sensitive rename or symbolic link races to redirect a privileged recursive relabeling operation to unintended files or directories. This vulnerability breaks the hardening expectations for SELinux administration workflows and can lead to the unauthorized modification of security labels on sensitive system objects. |
| A Time-of-Check to Time-of-Use (TOCTOU) race condition exists in the mkfifo utility of uutils coreutils. The utility creates a FIFO and then performs a path-based chmod to set permissions. A local attacker with write access to the parent directory can swap the newly created FIFO for a symbolic link between these two operations. This redirects the chmod call to an arbitrary file, potentially enabling privilege escalation if the utility is run with elevated privileges. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Vulnerability in Spring Spring Security. Applications that explicitly configure One-Time Token login with JdbcOneTimeTokenService are vulnerable to a Time-of-check Time-of-use (TOCTOU) race condition. This issue affects Spring Security: from 6.4.0 through 6.4.15, from 6.5.0 through 6.5.9, from 7.0.0 through 7.0.4. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. From version 4.0.0 to before version 4.14.4, Wazuh's server API brute-force protection for POST /security/user/authenticate can be bypassed by sending concurrent authentication requests. Although the configured threshold (max_login_attempts, default 50) is enforced correctly for sequential requests, a parallel burst allows significantly more failed login attempts to be processed before the IP block is applied. This enables an attacker to perform more password guesses than the configured policy intends (e.g., 100 attempts processed where 50 should be allowed). This issue has been patched in version 4.14.4. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| LangChain is a framework for building agents and LLM-powered applications. Prior to 1.1.14, langchain-openai's _url_to_size() helper (used by get_num_tokens_from_messages for image token counting) validated URLs for SSRF protection and then fetched them in a separate network operation with independent DNS resolution. This left a TOCTOU / DNS rebinding window: an attacker-controlled hostname could resolve to a public IP during validation and then to a private/localhost IP during the actual fetch. |
