| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG
There were multiple issues in that code.
First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.
Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.
Then we used down_read_trylock() instead of waiting for the reset to
finish.
(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/conexant: Fix missing error check for jack detection
In cx_probe(), the return value of snd_hda_jack_detect_enable_callback()
is ignored. This function returns a pointer, and if it fails (e.g., due
to memory allocation failure), it returns an error pointer which must
be checked using IS_ERR().
If the registration fails, the driver continues to probe, but the jack
detection callback will not be registered. This can lead to a kernel
crash later when the driver attempts to handle jack events or accesses
the uninitialized structure.
Check the return value using IS_ERR() and propagate the error via
PTR_ERR() to the probe caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix NULL pointer dereference in ice_reset_all_vfs()
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
crash> bt
PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5"
#0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee
#1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba
#2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540
#3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda
#4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997
#5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595
#6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2
[exception RIP: ice_ena_vf_q_mappings+0x79]
RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206
RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000
RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040
R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000
R13: 0000000000000010 R14: R15:
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice]
#8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice]
#9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice]
#10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4
#11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de
#12 [ff72159bcfe5bf18] kthread at ffffffffaa946663
#13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9
The panic occurs attempting to dereference the NULL pointer in RDX at
ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi).
The faulting VSI is an allocated slab object but not fully initialized
after a failed ice_vsi_rebuild():
crash> struct ice_vsi 0xff34c9efc27d4828
netdev = 0x0,
rx_rings = 0x0,
tx_rings = 0x0,
q_vectors = 0x0,
txq_map = 0x0,
rxq_map = 0x0,
alloc_txq = 0x10,
num_txq = 0x10,
alloc_rxq = 0x10,
num_rxq = 0x10,
The nvmupdate64e process was performing NVM firmware update:
crash> bt 0xff34c9edd1a30000
PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e"
#0 [ff72159bcd617618] __schedule at ffffffffab5333f8
#4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice]
#5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice]
#6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice]
#7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice]
#8
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix double free and use-after-free in aux device error paths
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500/oaktrail_lvds: fix hang on init failure
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Check whether the config array is allocated before destroying it
__destroy_component_cfg() is called to free the configuration array.
It uses the embedded 'garbage' structure, which means the array has
to be allocated.
If __destroy_component_cfg() is called from mpam_disable() before the
configuration was ever allocated, then a NULL pointer is dereferenced.
Check for this case and return early if the configuration is not
allocated.
__destroy_component_cfg() also frees the mbwu_state as this is allocated
by __allocate_component_cfg(). As the mbwu_state is allocated after
comp->cfg is set, and is also under mpam_list_lock, only the first
pointer needs checking. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix off-by-one in multicast context address compression
The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses
&data[1] as destination and &ipaddr->s6_addr[11] as source, but
both should be offset by one: &data[2] and &ipaddr->s6_addr[12]
respectively.
This off-by-one has two consequences:
1. data[1] is overwritten with s6_addr[11], corrupting the RIID
field in the compressed multicast address
2. data[5] is never written, so uninitialized kernel stack memory
is transmitted over the network via lowpan_push_hc_data(),
leaking kernel stack contents
The correct inline data layout must match what the decompression
function lowpan_uncompress_multicast_ctx_daddr() expects:
data[0..1] = s6_addr[1..2] (flags/scope + RIID)
data[2..5] = s6_addr[12..15] (group ID)
Also zero-initialize the data array as a defensive measure against
similar bugs in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: Release nested relation on devlink free
devlink relation state is normally released from devl_unregister(), which
calls devlink_rel_put(). This misses devlink instances that get a nested
relation before registration and then fail probe before devl_register() is
reached.
That flow can happen for SFs. The child devlink gets linked to its
parent before registration, then a later probe error calls devlink_free()
directly. Since the instance was never registered, devl_unregister() is not
called and devlink->rel is leaked.
Release any pending relation from devlink_free() as well. The registered
path is unchanged because devl_unregister() already clears devlink->rel
before devlink_free() runs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
hci_get_route() returns a reference-counted hci_dev pointer via
hci_dev_hold(). The function exits normally or with an error without ever
releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
