| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix mr->map double free
rxe_mr_cleanup() which tries to free mr->map again will be called when
rxe_mr_init_user() fails:
CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
panic+0x19e/0x349
end_report.part.0+0x54/0x7c
kasan_report.cold+0xa/0xf
rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe]
__rxe_cleanup+0x10a/0x1e0 [rdma_rxe]
rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe]
ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs]
This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix
memory leak in error path code") and then we fixed it in commit
8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this
fix was reverted together at last by commit 1e75550648da (Revert
"RDMA/rxe: Create duplicate mapping tables for FMRs")
Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is
successfully allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free()
When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees
mixer->id_elems but the controls already added to the card still
reference the freed memory. Later when snd_card_register() runs,
the OSS mixer layer calls their callbacks and hits a use-after-free read.
Call trace:
get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411
get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241
mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381
snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887
...
snd_card_register+0x4ed/0x6d0 sound/core/init.c:923
usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025
Fix by calling snd_ctl_remove() for all mixer controls before freeing
id_elems. We save the next pointer first because snd_ctl_remove()
frees the current element. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: hfsc: Fix a UAF vulnerability in class handling
This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class
handling. The issue occurs due to a time-of-check/time-of-use condition
in hfsc_change_class() when working with certain child qdiscs like netem
or codel.
The vulnerability works as follows:
1. hfsc_change_class() checks if a class has packets (q.qlen != 0)
2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g.,
codel, netem) might drop packets and empty the queue
3. The code continues assuming the queue is still non-empty, adding
the class to vttree
4. This breaks HFSC scheduler assumptions that only non-empty classes
are in vttree
5. Later, when the class is destroyed, this can lead to a Use-After-Free
The fix adds a second queue length check after qdisc_peek_len() to verify
the queue wasn't emptied. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-50 and 7.1.2-25, when an allocation fails in CheckPrimitiveExtent this can result in a heap-use-after-free and result in a crash. This issue has been patched in versions 6.9.13-50 and 7.1.2-25. |
| Use after free in Windows Bluetooth Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Bluetooth Port Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
strlen+0x93/0xa0 lib/string.c:420
__fortify_strlen include/linux/fortify-string.h:268 [inline]
get_kobj_path_length lib/kobject.c:118 [inline]
kobject_get_path+0x3f/0x2a0 lib/kobject.c:158
kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545
ib_register_device drivers/infiniband/core/device.c:1472 [inline]
ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393
rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552
rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225
nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796
rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmsg+0x16d/0x220 net/socket.c:2652
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This problem is similar to the problem that the
commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name")
fixes.
The root cause is: the function ib_device_rename() renames the name with
lock. But in the function kobject_uevent(), this name is accessed without
lock protection at the same time.
The solution is to add the lock protection when this name is accessed in
the function kobject_uevent(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix bsg_done() causing double free
Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223] <TASK>
[5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232] ? sg_copy_buffer+0xc8/0x110
[5353358.825236] ? __die_body.cold+0x8/0xd
[5353358.825238] ? page_fault_oops+0x134/0x170
[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244] ? exc_page_fault+0xa8/0x150
[5353358.825247] ? asm_exc_page_fault+0x22/0x30
[5353358.825252] ? memcpy_erms+0x6/0x10
[5353358.825253] sg_copy_buffer+0xc8/0x110
[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]
Most routines in qla_bsg.c call bsg_done() only for success cases.
However a few invoke it for failure case as well leading to a double
free. Validate before calling bsg_done(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete(). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()
syzbot reports:
BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60
Read of size 8 at addr ffff88810de2d2c8 by task a.out/304
CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x670
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? getrusage+0x1109/0x1a60
kasan_report+0xce/0x100
? getrusage+0x1109/0x1a60
getrusage+0x1109/0x1a60
? __pfx_getrusage+0x10/0x10
__io_uring_show_fdinfo+0x9fe/0x1790
? ksys_read+0xf7/0x1c0
? do_syscall_64+0xa4/0x260
? vsnprintf+0x591/0x1100
? __pfx___io_uring_show_fdinfo+0x10/0x10
? __pfx_vsnprintf+0x10/0x10
? mutex_trylock+0xcf/0x130
? __pfx_mutex_trylock+0x10/0x10
? __pfx_show_fd_locks+0x10/0x10
? io_uring_show_fdinfo+0x57/0x80
io_uring_show_fdinfo+0x57/0x80
seq_show+0x38c/0x690
seq_read_iter+0x3f7/0x1180
? inode_set_ctime_current+0x160/0x4b0
seq_read+0x271/0x3e0
? __pfx_seq_read+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? __mark_inode_dirty+0x402/0x810
? selinux_file_permission+0x368/0x500
? file_update_time+0x10f/0x160
vfs_read+0x177/0xa40
? __pfx___handle_mm_fault+0x10/0x10
? __pfx_vfs_read+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? fdget_pos+0x24d/0x4b0
ksys_read+0xf7/0x1c0
? __pfx_ksys_read+0x10/0x10
? do_user_addr_fault+0x43b/0x9c0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0f74170fc9
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8
RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9
RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004
RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90
R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 298:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x6e/0x70
kmem_cache_alloc_node_noprof+0xe8/0x330
copy_process+0x376/0x5e00
create_io_thread+0xab/0xf0
io_sq_offload_create+0x9ed/0xf20
io_uring_setup+0x12b0/0x1cc0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 22:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kmem_cache_free+0xc4/0x360
rcu_core+0x5ff/0x19f0
handle_softirqs+0x18c/0x530
run_ksoftirqd+0x20/0x30
smpboot_thread_fn+0x287/0x6c0
kthread+0x30d/0x630
ret_from_fork+0xef/0x1a0
ret_from_fork_asm+0x1a/0x30
Last potentially related work creation:
kasan_save_stack+0x33/0x60
kasan_record_aux_stack+0x8c/0xa0
__call_rcu_common.constprop.0+0x68/0x940
__schedule+0xff2/0x2930
__cond_resched+0x4c/0x80
mutex_lock+0x5c/0xe0
io_uring_del_tctx_node+0xe1/0x2b0
io_uring_clean_tctx+0xb7/0x160
io_uring_cancel_generic+0x34e/0x760
do_exit+0x240/0x2350
do_group_exit+0xab/0x220
__x64_sys_exit_group+0x39/0x40
x64_sys_call+0x1243/0x1840
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88810de2cb00
which belongs to the cache task_struct of size 3712
The buggy address is located 1992 bytes inside of
freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980)
which is caused by the task_struct pointed to by sq->thread being
released while it is being used in the function
__io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre
relase or exit of sq->thread.
Fix this by assigning and looking up ->thread under RCU, and grabbing a
reference to the task_struct. This e
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix dm_blk_report_zones
If dm_get_live_table() returned NULL, dm_put_live_table() was never
called. Also, it is possible that md->zone_revalidate_map will change
while calling this function. Only read it once, so that we are always
using the same value. Otherwise we might miss a call to
dm_put_live_table().
Finally, while md->zone_revalidate_map is set and a process is calling
blk_revalidate_disk_zones() to set up the zone append emulation
resources, it is possible that another process, perhaps triggered by
blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If
blk_revalidate_disk_zones() fails, these resources can be freed while
the other process is still using them, causing a use-after-free error.
blk_revalidate_disk_zones() will only ever be called when initially
setting up the zone append emulation resources, such as when setting up
a zoned dm-crypt table for the first time. Further table swaps will not
set md->zone_revalidate_map or call blk_revalidate_disk_zones().
However it must be called using the new table (referenced by
md->zone_revalidate_map) and the new queue limits while the DM device is
suspended. dm_blk_report_zones() needs some way to distinguish between a
call from blk_revalidate_disk_zones(), which must be allowed to use
md->zone_revalidate_map to access this not yet activated table, and all
other calls to dm_blk_report_zones(), which should not be allowed while
the device is suspended and cannot use md->zone_revalidate_map, since
the zone resources might be freed by the process currently calling
blk_revalidate_disk_zones().
Solve this by tracking the process that sets md->zone_revalidate_map in
dm_revalidate_zones() and only allowing that process to make use of it
in dm_blk_report_zones(). |
| Use after free in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Function Discovery Service (fdwsd.dll) allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| Use after free in Microsoft Graphics Component allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Deployment Services allows an unauthorized attacker to execute code over a network. |
