| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap buffer overflow flaw was found in the SASL I/O layer of 389 Directory Server
(389-ds-base). After a successful SASL bind with integrity protection (SSF > 0),
an authenticated attacker can send a specially crafted oversized LDAP UNBIND packet
that is copied into a 512-byte heap receive buffer without a bounds check in
sasl_io_recv() in sasl_io.c. This allows up to approximately 2 megabytes of
attacker-controlled data to overflow the buffer, causing a denial of service (server
crash). In FreeIPA and Red Hat Identity Management deployments, any domain user with
a valid Kerberos ticket, any enrolled host, or any service account can trigger this
vulnerability over the network after authenticating via GSSAPI.
The vulnerable code path has existed since approximately 2013 (389-ds-base 1.3.2) and
was not addressed by the CVE-2025-14905 fix, which patched a separate heap overflow
in schema.c only. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in CreateSaverWindow(). A client can trigger a use-after-free read after changing window attributes and forcing the screen saver, leading to information disclosure. |
| An out-of-bounds read flaw was found in the X.Org X server and Xwayland in __glXDisp_ChangeDrawableAttributes(). A wrong size validation check can read a client-controlled number of bytes, exceeding the request buffer, leading to information disclosure. A write path also exists but requires byte-swapped clients which is disabled by default. |
| An out-of-bounds write flaw was found in the X.Org X server and Xwayland in DRIGetBuffers/DRIGetBuffersWithFormat. A client that requests multiple DRI2BufferBackLeft attachments and one DRI2BufferFrontLeft can trigger an out-of-bounds heap write. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in FreeCounter(). A client that sets up multiple SyncCounters and awaits on those triggers can trigger a use-after-free when destroying those counters via a second client connection. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in SyncChangeCounter(). A client that sets up multiple SyncCounters can trigger a use-after-free when destroying those counters via a second client connection while changing those counters. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. The X server has multiple stack buffers sized XkbMaxShiftLevel * XkbNumKbdGroups but CheckKeyTypes() does not verify or clamp non-canonical key types to XkbMaxShiftLevel. A client can change key types to excessive shift levels and trigger stack overflows. This is caused by an incomplete fix of CVE-2025-26597. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A use-after-free flaw was found in the X.Org X server and Xwayland in miSyncDestroyFence(). A client that sets up multiple fence triggers can trigger a use-after-free function pointer call. An attacker would connect to the X server to set up a fence and await that fence, then a second X connection destroys the fence, causing the use-after-free. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| An integer overflow flaw was found in the SASL I/O layer of 389 Directory Server (389-ds-base). In sasl_io_start_packet(), adding sizeof(uint32_t) to a crafted SASL packet length prefix of 0xFFFFFFFC causes unsigned wraparound to zero, bypassing the nsslapd-maxsasliosize limit and leading to a heap buffer overflow of up to approximately 2 megabytes of attacker-controlled data. After a successful SASL bind with integrity protection (SSF > 0), a remote attacker can cause a Denial of Service (DoS) or achieve Remote Code Execution (RCE). In FreeIPA and Red Hat Identity Management deployments, any domain user with a valid Kerberos ticket, enrolled host, or service account can trigger this vulnerability over the network. This flaw is independent of CVE-2025-14905, which patched schema.c only and did not modify sasl_io.c. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service. |
| A flaw was found in the soup_multipart_new_from_message() function of the libsoup HTTP library, which is commonly used by GNOME and other applications to handle web communications. The issue occurs when the library processes specially crafted multipart messages. Due to improper validation, an internal calculation can go wrong, leading to an integer underflow. This can cause the program to access invalid memory and crash. As a result, any application or server using libsoup could be forced to exit unexpectedly, creating a denial-of-service (DoS) risk. |
| A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions. |
| A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system. |
| A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition. |
| A flaw was found in the X Record extension. The RecordSanityCheckRegisterClients function does not check for an integer overflow when computing request length, which allows a client to bypass length checks. |
