| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NATS Server is a high-performance server for NATS.io, the cloud and edge native messaging system. Prior to 2.14.3 and 2.12.12, a WebSocket listener could route requests for the MQTT-over-WebSocket path into MQTT handling even when MQTT was not configured, allowing an unauthenticated client with access to the WebSocket listener to reach uninitialized MQTT state and crash the server process. This issue is fixed in versions 2.14.3 and 2.12.12. |
| OpenTelemetry JavaScript is the OpenTelemetry JavaScript client. Prior to 2.9.0, @opentelemetry/propagator-jaeger decodes incoming uber-trace-id and uberctx-* HTTP header values with decodeURIComponent() without handling decode errors, allowing an unauthenticated remote attacker to send a malformed percent-encoded value that throws an uncaught URIError and terminates a Node.js process using JaegerPropagator as the active propagator. This issue is fixed in version 2.9.0. |
| Uncaught Exception (CWE-248) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authenticated and authorized operator to trigger a Controller restart by sending specific requests, resulting in a temporary denial of service.
Version of Command Centre affected:
* 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1))
* 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3))
* 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5))
* 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7))
* all versions of 9.10 and prior. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.17, node-tar does not strip NUL bytes from PAX path and linkpath records in src/pax.ts, allowing a crafted archive with values to reach fs.lstat or fs.open and terminate the process with an uncaught exception. This issue is fixed in version 7.5.17. |
| Uncaught Exception (CWE-248) in the T20 Readers allows an authenticated and authorized operator to trigger a restart by sending specific requests, resulting in a temporary denial of service. Version of Command Centre affected:
* 9.50 prior to vCR9.50.260616a (distributed in 9.50.1587(MR1))
* 9.40 prior to vCR9.40.260616a (distributed in 9.40.3130(MR3))
* 9.30 prior to vCR9.30.260616a (distributed in 9.30.3983(MR5))
* 9.20 prior to vCR9.20.260616a (distributed in 9.20.4349(MR7))
* all versions of 9.10 and prior. |
| webpack-dev-server versions 5.2.5 and earlier terminate the whole Node.js process when an unauthenticated peer sends either a normal HTTP request with a malformed Host header or a WebSocket upgrade to the default /ws endpoint with a malformed Origin header. The malformed value causes an uncaught exception in the host-validation path and crashes the dev server. Impact is limited to availability of the development server, no data disclosure, no code execution. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: keep the dev server bound to localhost (the default) and do not expose it to untrusted networks. |
| Pion DTLS is a Go implementation of Datagram Transport Layer Security. Versions prior to 3.1.4 are vulnerable to Remote Denial of Service via panic while parsing a crafted ECDHE_PSK ServerKeyExchange message. This issue has been fixed in version 3.1.4. |
| @fastify/middie versions 9.1.0 through 9.3.2 fail to guard the URL normalization step used by the standalone engine when incoming request paths contain malformed percent-encoded sequences. Inputs such as an incomplete percent escape or a truncated multibyte sequence cause the underlying decoder to throw synchronously, and the exception escapes the middie normalize step and terminates the Node.js process. The bypass affects applications that call middie.run directly on the standalone engine API, causing an immediate denial of service for all connected clients until restart. Applications using the Fastify plugin path are not affected because Fastifys error handler catches the exception. Patches: upgrade to @fastify/middie 9.3.3. Workarounds: migrate from the standalone engine API to the Fastify plugin path, where the framework error handler catches the exception. |
| A flaw was found in the mod_auth_openidc module for Apache httpd. This flaw allows a remote, unauthenticated attacker to trigger a denial of service by sending an empty POST request when the OIDCPreservePost directive is enabled. The server crashes consistently, affecting availability. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.5.11, 4.4.18, and 4.3.24, a DoS can be triggered by (Uncaught Exception vulerability), due to missing exception handling in the math sanitizer. Malformed <math> nodes can result in a DoS of a whole server or targeted users services, depending on the type of action that includes the malformed nodes and the services interacting with it. This vulnerability is fixed in 4.5.11, 4.4.18, and 4.3.24. |
| Versions of the package ts-deepmerge before 8.0.0 are vulnerable to Uncaught Exception due to the improper handling of built-in Object.prototype methods (such as toString, valueOf). When user-controlled input contains these keys with non-function values, the resulting merged object becomes broken — any string context operation throws a TypeError, crashing the application. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime. Prior to 2.7.5, a Deno program that opens a client WebSocket connection could be crashed by the remote server. While handling the WebSocket handshake response, Deno parsed the Sec-WebSocket-Protocol and Sec-WebSocket-Extensions response headers in a way that assumed their bytes were always printable ASCII. A response header containing non-visible-ASCII bytes (0x80-0xFF) caused a panic that aborted the entire Deno process. This vulnerability is fixed in 2.7.5. |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT
If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()
returns an error code that is ignored by most callers, and continues to
run L1 with corrupted state. A sane recovery is not possible in this
case, and HW behavior is to cause a shutdown. Inject a triple fault
instead, and do not return early from nested_svm_vmexit(). Continue
cleaning up the vCPU state (e.g. clear pending exceptions), to handle
the failure as gracefully as possible.
From the APM:
Upon #VMEXIT, the processor performs the following actions in order to
return to the host execution context:
...
if (illegal host state loaded, or exception while loading host state)
shutdown
else
execute first host instruction following the VMRUN
Remove the return value of nested_svm_vmexit(), which is mostly
unchecked anyway. |
| Kanidm is an identity management platform. Prior to version 1.9.3, a single unauthenticated GET to any /scim/v1/... endpoint with a ?filter= query string of a few thousand nested parentheses (≈ 4–12 KB) drives the recursive-descent PEG parser past the worker thread's stack guard page. Rust responds to stack overflow with std::process::abort() — the entire kanidmd process exits. The parse runs inside axum's Query<ScimEntryGetQuery> extractor, before any handler body and therefore before any ACL check. This issue has been patched in version 1.9.3. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.5.0, a remote, unauthenticated denial-of-service vulnerability in MerkleRadixTrie::put_chunk allows any state-sync peer to crash any node performing state synchronization (freshly joining nodes and recovering nodes). This issue has been patched in version 1.5.0. |
| FlashMQ is a MQTT broker/server, designed for multi-CPU environments. Prior to version 1.26.2, authorized clients have the ability to exceed the permitted over-commit of their write buffer and triggering an internal safe-guard exception. This exception was in a path that was not catchable, and therefore causes a server abort. This issue has been patched in version 1.26.2. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. From version 0.1.0 to before version 0.9.0, malformed MongoDB wire messages can trigger uncaught panics in the MongoDB TCP parser, allowing a remote unauthenticated attacker to crash the telemetry agent and cause a denial of service. The parser operates on raw attacker-controlled network payloads before the input is fully validated, so a single crafted message can terminate telemetry collection for the affected process or node. This issue has been patched in version 0.9.0. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, OBI's replacement ELF parser trusts section offsets, counts, and string offsets from the executable file. A crafted local ELF can make OBI dereference invalid section pointers or slice past string tables, causing the agent to panic while determining the process language. This issue has been patched in version 0.9.0. |
| A vulnerability has been identified in SIMATIC CP 443-1 OPC UA (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V2.7), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI Comfort Panels 4" - 22" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Upd 4), SIMATIC IPC DiagMonitor (All versions < V5.1.3), SIMATIC NET PC Software V13 (All versions), SIMATIC NET PC Software V14 (All versions < V14 SP1 Update 14), SIMATIC NET PC Software V15 (All versions), SIMATIC RF188C (All versions < V1.1.0), SIMATIC RF600R family (All versions < V3.2.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.5 < V2.6.1), SIMATIC S7-1500 Software Controller (All versions between V2.5 (including) and V2.7 (excluding)), SIMATIC WinCC OA (All versions < V3.15 P018), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Upd 4), SINEC NMS (All versions < V1.0 SP1), SINEMA Server (All versions < V14 SP2), SINUMERIK OPC UA Server (All versions < V2.1), TeleControl Server Basic (All versions < V3.1.1). Specially crafted network packets sent to affected devices on port 4840/tcp could allow an unauthenticated remote attacker to cause a denial of service condition of the OPC communication or crash the device. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the OPC communication. |
