| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wss4jSecurityInterceptor did not consistently wire Apache WSS4J ReplayCache instances into RequestData for validation-time checks. As a result, protections against replay of UsernameToken nonces and creation timestamps, Timestamp elements, and certain SAML one-time-use semantics could be ineffective even when operators configured a replay cache on the interceptor.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| A flaw was found in Rancher Manager. The SAML assertion replay protection introduced by the fix for CVE-2026-44946 recorded consumed assertion IDs in a per-process cache, so each replica only detected replays that reached the same pod. In a high-availability deployment, an attacker holding a captured assertion could replay it once against every other replica to obtain additional authenticated sessions as the victim.
This issue affects Rancher: before 2.15.1. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.12.6 and 5.7.6, packages/panels/src/Auth/MultiFactor/App/AppAuthentication.php uses AppAuthentication::verifyCode() with a used-code cache key derived from both the app authentication secret and the submitted TOTP code. This isolates the newest accepted timestep by code instead of by secret, allowing a previously issued app-based MFA code to be accepted after a newer code has already been used. Reuse of the exact same code was already prevented, but another code inside the accepted time window remained usable. An attacker who obtains the target account's password and one app-based MFA code can use that code for the remainder of the configured window, which is approximately four minutes with the default settings, even after the legitimate account holder logs in with a newer code. Email-based MFA is not affected. This issue is fixed in versions 4.12.6 and 5.7.6. |
| When SAML IdP-initiated login is enabled in Grafana Enterprise, the SAML library skips validation of the InResponseTo field on all SAML responses, including SP-initiated logins. This removes anti-replay protection, allowing an attacker who obtains a valid signed SAML assertion to replay it and gain a session as the victim user. Only instances with the allow_idp_initiated SAML setting enabled are affected; this setting is off by default and Grafana OSS is not affected. |
| Open edX Platform enables the authoring and delivery of online learning at any scale. Prior to commit 3a5ac85, a security vulnerability has been identified in the Open edX LMS platform's LTI (Learning Tools Interoperability) Provider implementation. The validate_timestamp_and_nonce function in lms/djangoapps/lti_provider/signature_validator.py does not validate OAuth nonces or timestamps, allowing an attacker who captures a valid LTI launch request to replay it an unlimited number of times without detection. This issue has been patched via commit 3a5ac85. |
| Authentication bypass by capture-replay in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. |
| Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer-state changes — update_peer_addr() (endpoint roaming update), the keypair->last_rx/peer->last_rx liveness timers, and keypair_update() (promote next→current and destroy the previous keypair) — and only afterward called wg_check_replay(). On a replayed packet the replay check returned -EINVAL, but none of the preceding mutations were rolled back.
The AEAD tag authenticates content but not freshness, so a replayed-but-authentic transport packet decrypts correctly. An attacker who captures one valid ciphertext off the wire (an on-path or shared-medium observer) can re-inject it from an arbitrary spoofed source address. Reaching the handler requires no credentials: it is driven directly from inbound UDP datagrams via the dispatch in subsys/net/lib/wireguard/wg.c.
Because the state mutations committed before the replay check, the replay repoints the peer endpoint to the attacker-chosen source address (roaming hijack), redirecting the victim's subsequent outbound tunnel traffic until the legitimate peer's next packet re-corrects it; it also prematurely destroys the previous keypair and refreshes the RX liveness timer. The tunnel payload stays encrypted under the session keypair, so this is an integrity/availability impact (traffic redirection and session disruption), not payload disclosure. The fix moves wg_check_replay() to immediately after a successful decrypt, before any peer-state mutation, matching the WireGuard specification and the Linux reference implementation. |
| Unauthenticated Other Vulnerability Type in Forminator <= 1.57.1 versions. |
| Rodauth before 2.47.0 contains a time-based one-time password reuse vulnerability in the otp feature that fails to track the last accepted code timestamp. Attackers who observe a valid TOTP code can replay it during the drift window to bypass the second authentication factor. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via the SPC Connect Pro software accepts replayed application-layer payloads injected into an active TCP session. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Through 1.5.0, the validity store uses a strict lower-bound comparison that expires a stored transaction too early relative to Transaction::is_valid_at, allowing a remote attacker to replay the same signed transaction during a blocks_per_batch minus one block window and cause the sender and recipient balances to be updated twice. This issue is fixed in version 1.5.1. |
| Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST
authenticated request with a nonceCount on the upper boundary of the
replay window then that request is replayable once only while the
associated nonceCount remains within the replay window.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Authentication Bypass by Capture-replay vulnerability in Spring Spring Security allows Spring Security's DPoPProofJwtDecoderFactory contains a cache-based replay attack vulnerability. The internal cache storing JWT ID claims has a strict size limit, allowing attackers to evict legitimate entries by flooding the server with dummy requests, then replay intercepted valid DPoP proofs.
This issue affects Spring Security: 7.1.0, from 7.0.0 through 7.0.6, and from 6.5.0 through 6.5.11. |
| Etherpad is a real-time collaborative editor. From 2.6.0 until 3.1.0, Etherpad's src/node/hooks/express/tokenTransfer.ts uses POST /tokenTransfer to store an author token for transfer between browsers and exposes it through GET /tokenTransfer/{uuid}. Although the record includes createdAt, the transfer has no expiration check, is not removed after successful redemption, and is returned by res.send(tokenData), including the raw author token. An unauthenticated attacker who obtains a transfer UUID can repeatedly redeem it, receive fresh author cookies, read the cleartext token, and impersonate the originating author for pad read and write operations. This issue is fixed in version 3.1.0. |
| Authentication Bypass by Capture-replay vulnerability in dropbox samly allows an attacker to authenticate as the subject of a captured SAML assertion by resubmitting it.
Samly.Helper.decode_idp_auth_resp/3 in lib/samly/helper.ex calls esaml_sp:validate_assertion/2, whose default duplicate detector is a no-op. The /3 arity accepting a DuplicateFun exists in esaml and implements the check, but Samly never calls it and offers no configuration to supply one, so the SAML 2.0 Web Browser SSO Profile requirement that a bearer assertion be used once is unenforced. An attacker holding a valid SAMLResponse obtained from the network, from browser history, or from logs can submit the identical bytes repeatedly until the assertion's NotOnOrAfter passes, each time establishing a session as the assertion's subject.
This issue affects samly: from 0.3.0 onward. |
| BetterDesk is a remote desktop management solution. BetterDesk versions through 2.3.0 improperly invalidate deleted device identities, allowing an unauthenticated client to replay or spoof a device ID and bypass registration controls. Version 3.0.0-alpha contains a patch. No known workarounds are available. |
| phpMyFAQ before 4.1.7 fails to persist the WebAuthn login challenge generated by prepareForLogin, because neither WebAuthn controller saves the mutated key objects back to the database. At login the anti-replay comparison is skipped by its own null guard, allowing an attacker who captures a successful WebAuthn assertion to replay it indefinitely and authenticate as the user without any interaction or hardware key. |
| Authentication Bypass by Capture-replay in ZenHive mpp allows an unauthenticated remote client to obtain paid resources by resubmitting one settled on-chain transfer.
MPP.Methods.EVM.verify/2 accepts a transaction-hash credential and matches a transfer purely on token, to and amount (ERC-20) or to and value (native). It binds the proof neither to the challenge being verified nor to any record of prior use, and the generic MPP.Plug dedup store keys on challenge.id, which is regenerated for every 402 response. On a static-price route, a single historical transfer matching the charge therefore satisfies an unbounded number of later charges, including transfers an attacker can read off a public block explorer.
This issue affects mpp: from 0.3.0 before 0.6.3. |
| Authentication Bypass by Capture-replay in ZenHive mpp allows an unauthenticated third party to obtain paid resources by replaying a transfer settled by an unrelated payer.
MPP.Methods.Tempo normally binds a settled TIP-20 TransferWithMemo to the specific challenge under verification through an attribution nonce carried in the memo. When a static "memo" is configured in method_config, check_matched_memo_binding/3 returns the match unconditionally and that binding is skipped, leaving only token, recipient, amount and the static memo value to match on. The static memo is echoed in every unauthenticated 402 response and Tempo transfers are public, so an attacker can take any matching transfer paid by a legitimate customer, request a fresh challenge for the same route, and present that transaction hash as a type="hash" credential. The hash path performs no sender or signature check tying the presenter to the wallet that broadcast the transfer.
This issue affects mpp: from 0.6.1 before 0.6.4. |
