| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| py7zr is a Python-based library and utility to support 7zip archive compression, decompression, encryption and decryption. Prior to 1.1.3, py7zr's Worker.decompress() extracted archive entries without tracking total decompressed size, allowing a crafted .7z file such as a 15.6 KB archive that expands to 100 MB to exhaust disk or memory before extraction completes. This issue is fixed in version 1.1.3. |
| Fluentd collects events from various data sources and writes them to files, RDBMS, NoSQL, IaaS, SaaS, Hadoop and so on. Prior to 1.19.3, Fluentd's in_http and in_forward plugins support gzip-compressed data but enforce limits only on compressed payloads through settings such as body_size_limit and chunk_size_limit, allowing crafted compressed payloads to decompress in memory to an excessive size and cause denial of service through memory exhaustion. This issue is fixed in version 1.19.3. |
| rpcx through 1.9.3, fixed in commit 047aec1, contains a denial-of-service vulnerability in protocol.Message.Decode (protocol/message.go). When a message has the compression flag set, the payload is gzip-decompressed via util.Unzip with no limit on the decompressed output size. The only built-in size guard, protocol.MaxMessageLength, is checked against the compressed on-the-wire frame length, not the decompressed size, so it provides no protection. Because decoding (and decompression) occurs in readRequest before authentication, a single unauthenticated connection can send a small (under 2 MB) gzip-compressed message that expands to gigabytes of heap allocation, leading to out-of-memory conditions and service unavailability. |
| httplib2 is a comprehensive HTTP client library for Python. Prior to 0.32.0, httplib2 performs unbounded decompression of HTTP response bodies encoded with Content-Encoding: gzip or deflate in _decompressContent in httplib2/init.py, allowing a malicious or compromised HTTP server to return a small compressed payload that expands to an arbitrarily large size in memory and causes MemoryError or OOM-kill in the client process. This issue is fixed in version 0.32.0. |
| Coder allows organizations to provision remote development environments via Terraform. Starting in version 2.17.0 and prior to versions 2.29.7, 2.32.7, 2.33.8, and 2.34.2, `POST /api/v2/files` converts zip uploads to tar in memory via `CreateTarFromZip`, which enforced a per-entry size limit but no aggregate limit on total decompressed output, writing to an unbounded in-memory buffer. Exploitation requires authenticated file-upload access and the impact is limited to availability (denial of service). The fix in versions 2.29.7, 2.32.7, 2.33.8, and 2.34.2 adds a metadata preflight check that sums projected entry sizes and a streaming writer that enforces the aggregate limit during decompression. As a workaround, restrict file-upload permissions to trusted users or place a reverse proxy with request-body size limits in front of `coderd`. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause improper handling of highly compressed data. A successful exploit of this vulnerability might lead to denial of service. |
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/PcfFontFile.py _load_bitmaps() read glyph dimensions from the PCF METRICS section and passed them directly to Image.frombytes() without calling Image._decompression_bomb_check(), allowing crafted PCF font data to cause excessive memory allocation. This issue is fixed in version 12.3.0. |
| A weakness has been identified in GPAC up to 26.02.0. This affects an unknown part of the file src/utils/base_encoding.c of the component ISOBMFF Parser. Executing a manipulation can lead to highly compressed data. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. This patch is called 297f2d8d1f493d8b241330533cd47f7da758aeb3. A patch should be applied to remediate this issue. The vendor confirms: "We added a check on inflate output size, if it surpasses 32 times the input size we stop in error. This value could be adjusted later." |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.45.0 until 2.91.0, the METS-GBS backend's XML parsing and the input document format detection lacked security controls. An attacker could craft malicious METS-GBS archives that, when processed, could read sensitive files, exhaust system resources, or cause application crashes. This vulnerability is fixed in 2.91.0. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.23.0 until 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability has been identified in Envoy's zstd decompressor implementation (ZstdDecompressorImpl). When zstd decompression is enabled, processing a specially crafted, highly compressed zstd payload can lead to massive memory allocation. An attacker can exploit this to cause severe memory exhaustion, potentially resulting in an Out-Of-Memory (OOM) kill and Denial of Service (DoS) for the Envoy proxy. This vulnerability is fixed in 1.35.11, 1.36.7, 1.37.3, and 1.38.1. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, when MessagePack-CSharp decompresses Lz4Block or Lz4BlockArray payloads, it reads declared uncompressed lengths from the wire and allocates output buffers based on those lengths before validating that the compressed data is valid or that the declared expansion is reasonable. A small payload can claim a very large uncompressed length and force a large allocation before LZ4 decoding begins. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.ReadDateTime() can allocate stack memory based on an attacker-controlled MessagePack extension length. In the slow path for timestamp extension parsing, the computed tokenSize includes the extension body length from the wire and is used in a stackalloc operation before the extension length is validated as one of the valid timestamp sizes. A very small payload can claim a large timestamp extension body and cause a stack allocation large enough to trigger an uncatchable StackOverflowException, terminating the host process. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| n8n is an open source workflow automation platform. Prior to 2.24.0, the Compression node's Decompress operation expanded attacker-controlled archives into memory without enforcing limits on decompressed output size. An unauthenticated attacker could send a small compressed archive to a public webhook workflow using this node, causing the n8n process to terminate due to memory exhaustion and disrupting all workflows in the same instance. This vulnerability is fixed in 2.24.0. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.1, during cleanup it is possible for a compressed request body to be decompressed into memory in one chunk. An attacker may be able to send a compressed payload in specific situations that could be decompressed into memory, potentially leading to DoS (a zip bomb edge case). This vulnerability is fixed in 3.14.1. |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to 0.23.1rc0, vLLM's /v1/audio/transcriptions endpoint limits compressed upload size but not decoded PCM output. A 25MB OPUS file expands to ~14.9GB of float32 PCM at decode time. This vulnerability is fixed in 0.23.1rc0. |
| Memory Allocation with Excessive Size Value vulnerability in Apache HTTP Server's mod_http leads to denial of service via malicious HTTP requests.
This issue affects Apache HTTP Server: from 2.4.17 through 2.4.67. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1, a vulnerability in Envoy's HTTP/2 downstream request processing allows an unauthenticated remote client to trigger excessive memory consumption, potentially resulting in OOM termination of the Envoy process and denial of service. The issue arises from the combination of two behaviors. First, cookie header bytes are not fully accounted for during request header size validation in Envoy. Second, HPACK header block limits in oghttp2/quiche are enforced on encoded bytes without a corresponding limit on total decoded header size. Together, these behaviors allow a malicious client to cause large decoded header allocations while bypassing the intended request header size protections. Versions 1.35.11, 1.36.7, 1.37.3, and 1.38.1 contain a fix. No complete workaround is known short of applying a fix. Possible temporary mitigations include disabling downstream HTTP/2 where operationally feasible; enforcing stricter request header and cookie limits before traffic reaches Envoy; and monitoring Envoy memory usage for abnormal growth under HTTP/2 traffic. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-grpc grpc (GRPC.Compressor.Gzip, GRPC.Message modules) allows a denial of service via a gzip decompression bomb.
This vulnerability is associated with program files lib/grpc/compressor/gzip.ex, lib/grpc/message.ex and program routines 'Elixir.GRPC.Compressor.Gzip':decompress/1, 'Elixir.GRPC.Message':from_data/2.
'Elixir.GRPC.Compressor.Gzip':decompress/1 calls :zlib.gunzip/1 directly on attacker-controlled bytes with no decompressed-size limit, ratio check, or incremental decoding. Because this module is the registered gzip GRPC.Compressor implementation, it is invoked automatically whenever an incoming gRPC frame carries the grpc-encoding: gzip header. :zlib.gunzip/1 allocates the entire decompressed result as a single binary, so a small highly compressible payload (for example a few kilobytes of zeros, which gzip compresses at roughly 1000:1) expands to multiple gigabytes inside a single call. The max_receive_message_length limit is enforced only against the already-decompressed message, so it provides no protection. An unauthenticated remote peer can send a single crafted frame to exhaust the BEAM node's heap and trigger an out-of-memory kill.
This issue affects grpc: from 0.4.0 before 1.0.0. |
| Protocol::HTTP2 versions before 1.13 for Perl is vulnerable to a HTTP/2 Bomb.
Protocol::HTTP2's inbound HPACK path has no header-list size limit, so a small HTTP/2 request can expand into large server memory (the "HTTP/2 bomb").
The headers_decode method materialises a full key+value copy per indexed reference with no running size check, and the stream_header_block_add method appends (since version 1.12) every CONTINUATION frame to the per-stream buffer unbounded.
MAX_HEADER_LIST_SIZE (default 65536) is advertised in SETTINGS but never consulted on decode. It is absent from the decoder and from the :limits export tag. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in wojtekmach Req allows attacker-controlled HTTP servers to exhaust memory in a Req client via decompression-bomb response bodies.
Req's default response pipeline includes Req.Steps.decode_body/1 and Req.Steps.decompress_body/1 in lib/req/steps.ex. decode_body/1 dispatches on the server-supplied content-type (or URL extension) and calls :zip.extract(body, [:memory]) for application/zip, :erl_tar.extract({:binary, body}, [:memory]) for application/x-tar, and :erl_tar.extract({:binary, body}, [:memory, :compressed]) for application/gzip / .tgz. Each returns the full decompressed archive contents as a [{name, bytes}] list in memory, with no per-entry or total size cap. decompress_body/1 walks the content-encoding header and chains :zlib/:brotli/:ezstd decoders, so a response advertising content-encoding: gzip, gzip, gzip inflates through multiple layers without bound.
Both steps are enabled by default, no caller opt-in is required, and the attacker controls the content-type and content-encoding headers on their own server (or on any host reached via Req's automatic redirect following). A sub-megabyte response can expand to multiple gigabytes on the victim, crashing the BEAM process.
This issue affects req: from 0.1.0 before 0.6.1. |
