| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, built with IPv6, the ICMPv6 option validator accepts an option area that ends in a one- or two-byte residue, and the Router Advertisement, Neighbor Solicitation, Neighbor Advertisement and Redirect handlers then walk it without length checks. A host on the local link can send one such message to make the IP thread read past the packet or loop forever, and can place off-packet memory in the neighbor cache. |
| sngrep through 1.9.0 contains an infinite loop vulnerability in capture_packet_reasm_ip() in src/capture.c that allows attackers to cause denial of service via crafted NFLOG TLVs. Attackers can supply a pcap file with link type NFLOG containing a non-payload TLV with length under 4, making the capture thread spin at full CPU and stop processing packets. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option. |
| CGI versions before 5.00 for Perl allow an infinite loop on a short request body when $DISABLE_UPLOADS is set.
When $CGI::PUTDATA_UPLOAD or an upload hook is set, read_postdata_putdata takes a request body that is not a form submission. With $CGI::DISABLE_UPLOADS set, it discards the body by reading until Content-Length bytes have arrived. Once a body shorter than its Content-Length runs out, every read returns 0, so the loop never ends.
A client can keep a server process spinning with one such request. |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). |
| The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior.
When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835).
An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence.
The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts. |
| isomorphic-git is a pure JavaScript implementation of Git for Node.js and browsers. Prior to 1.38.6, isomorphic-git persists server-supplied circular symref= capabilities through updateRemoteRefs, and GitRefManager.resolve() follows the resulting loose symbolic references without a default depth limit or cycle detection. After a clone from a malicious or man-in-the-middle-controlled remote, operations such as log, status, checkout, and branch that resolve refs/remotes/origin/a or refs/remotes/origin/b do not terminate. The circular references remain on disk, leaving the repository unusable for the application and causing a persistent denial of service. This issue is fixed in version 1.38.6. |
| MariaDB Connector/J is used to connect applications developed in Java to MariaDB and MySQL databases. From 3.0.0 until 3.3.7, 3.4.5, and 3.5.11, the connector assumed result bytes were UTF-8 but guarded only changes to character_set_client. It did not reject non-UTF-8 character_set_results changes and relied on the server's global session_track_system_variables configuration to report character-set changes. A malicious or compromised server, or a machine-in-the-middle attacker, could suppress tracking or change the result charset so application strings differed from the returned bytes, potentially defeating application-side validation or escaping that depended on the decoded values. This issue is fixed in versions 3.3.7, 3.4.5, and 3.5.11. |
| FreeRDP before 3.32.2 contains a denial of service vulnerability in the shadow server that allows authenticated RDP clients to spin server threads by sending zero-length drdynvc DATA PDUs. Attackers can send empty DATA messages on opened audin or rdpgfx channels, so that FreeRDP_WTSVirtualChannelRead never consumes them, consuming full CPU cores until disconnect. |
| FreeRDP before 3.32.2 contains a denial-of-service vulnerability in rdg_process_control_packet that allows a malicious RD Gateway to exhaust client CPU by sending an incomplete keepalive control packet. Attackers completing the RDG tunnel-open exchange then send an eight-byte header with packetLength 0xFFFF and withhold the body, causing an unbounded no-progress read loop that spins one client thread at full CPU. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. |
| imagecodecs 2026.3.6 through 2026.10.10 contains an infinite loop vulnerability in ccitt_fax4_decode_size() that allows attackers to hang the calling process by supplying a crafted CCITT Group 4 stream. Attackers can provide an 8-byte G4 stream lacking EOFB to ccittfax4_decode() or the numcodecs Ccittfax4 codec, consuming full CPU until the process is killed. |
| The VobSub subtitle decoder libsub_vob (part of the Amlogic DroidLogic SubTitleService), as shipped on Nexbox A95X (Amlogic S905X) TV boxes, contains an infinite loop vulnerability in get_vob_spu() that allows unauthenticated network attackers or local users loading malicious files to trigger an unreachable loop exit condition via mismatched length fields. Attackers can send crafted AMLU data blocks over the unauthenticated tcp/10100 listener or via a malicious VobSub (.sub) file to cause the subtitle decode thread to spin at 100% CPU indefinitely, resulting in denial of service. |
| A vulnerability has been found in phpMyAdmin ShapeFile up to 4.0.1. Impacted is the function ShapeRecord::loadFromFile of the component SHP File Handler. Such manipulation leads to infinite loop. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Kvazaar through 2.3.2 contains an infinite loop vulnerability in read_header() in src/encmain.c that allows attackers to hang the command-line encoder by supplying a truncated Y4M header. Attackers can provide a crafted .y4m file lacking a terminating newline, causing unchecked EOF reads that hang the process indefinitely while consuming a full CPU core. |
| A remotely exploitable denial-of-service vulnerability exists in the TCP options parser of the Nut/Net TCP/IP stack included in Nut/OS, developed by Ethernut/Egnite. Nut/OS releases up to version 5.1 are affected. An unauthenticated attacker can send a single TCP segment containing an unknown TCP option with a length byte of zero to any open TCP port on a vulnerable device. When processed, this malformed option triggers an infinite loop in the function NutTcpInputOptions, permanently blocking the TCP processing thread and rendering all TCP-based services unresponsive until the device is rebooted. |
| HDF5 through 2.2.0 contains an uncontrolled recursion vulnerability in H5B__iterate_helper() in src/H5B.c. When iterating a version 1 B-tree, the function does not verify that a child node’s level matches the expected level. That check is performed only in H5B__cache_deserialize() when a node is first loaded into the metadata cache. A crafted HDF5 file whose B-tree child pointer refers back to a node already in the cache, such as a node that points to itself, bypasses the check and causes unbounded recursion, leading to stack exhaustion and a crash. This can be triggered by calling H5Gget_info() or H5Gget_num_objs() on a group in the crafted file, which reaches H5B_iterate() through H5G__obj_info() and H5G__stab_count(). An attacker who can get a user or application to open a malicious file can cause a denial of service. |
| Infinite loop in Xpdf 4.06 and earlier, due to incorrect validation of progression order field in JPEG 2000 image. |
| GNU mtools before 4.0.50 has an out-of-bounds write in parse_vses in vfat.c. |
