Export limit exceeded: 49168 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (49168 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-54518 | 1 Amd | 11 Epyc 7002 Series Processors, Epyc Embedded 7002 Series Processors, Ryzen 3000 Series Desktop Processors and 8 more | 2026-09-04 | 7.0 High |
| Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation. | ||||
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-80754 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2025-11537 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-09-04 | 5 Medium |
| A flaw was found in Keycloak. When the logging format is configured to a verbose, user-supplied pattern (such as the pre-defined 'long' pattern), sensitive headers including Authorization and Cookie are disclosed to the logs in cleartext. An attacker with read access to the log files can extract these credentials (e.g., bearer tokens, session cookies) and use them to impersonate users, leading to a full account compromise. | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80749 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/connector/hdmi: Fix out of bounds memory read A helper function was copying a given audio infoframe into the connector's copy but using the size of the destination (a generic target, sized to accept many different data blocks) not the source (a very specific type of data block). Thus, it was copying 60 bytes of data from a 28 byte allocation. Fix that by using the source size instead, together with a build bug on the source size actually being smaller than the destination. I hit this running KUnit tests under KASAN (while debugging something else entirely). In the real world, it seems unlikely to cause an actual problem. It is a read not a write so it can't corrupt any memory. However, it could potentially fall off the end of a page and cause an accvio bug. | ||||
| CVE-2026-85507 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_info in ipmi-oem/ipmi-oem-dell.c (cmc-info subcommand to dell get-system-info). | ||||
| CVE-2026-85505 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 7.5 High |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer over-read in ipmi_oem_fujitsu_get_sel_entry_long_text in ipmi-oem/ipmi-oem-fujitsu.c when a BMC provides a short response, a different vulnerability than CVE-2026-50031 (which has different affected versions). | ||||
| CVE-2026-85506 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _get_dell_system_info_idrac_info in ipmi-oem/ipmi-oem-dell.c (idrac-info subcommand to dell get-system-info). | ||||
| CVE-2026-84484 | 1 Nasajpl | 1 Iondtn | 2026-09-04 | 7.5 High |
| ION-DTN versions before 4.2.0 contain an out-of-bounds read vulnerability in the decodeSdnv function that allows unauthenticated remote attackers to read memory by sending truncated SDNV values. Attackers can send a UDP datagram to the LTP link service input port with a truncated SDNV to trigger reads up to nine bytes past buffer boundaries and underflow byte counters. | ||||
| CVE-2026-84376 | 1 Withastro | 1 Astro | 2026-09-04 | N/A |
| Astro is a web framework for content-driven websites. Prior to 7.2.4, Astro stripped a configured non-root base path from request pathnames using a string-prefix check without verifying a path-segment boundary. With base "/app", a request to "/appX/admin" resolved internally to the protected "/admin" route while middleware observed "/appX/admin" in context.url.pathname. In applications that authorize base-prefixed routes by inspecting context.url.pathname, an unauthenticated remote attacker could bypass pathname-based middleware authorization and reach protected routes. This issue is fixed in version 7.2.4. | ||||
| CVE-2026-84370 | 1 Svg | 1 Svgo | 2026-09-04 | 8.2 High |
| SVGO, short for SVG Optimizer, is a Node.js library and command-line application for optimizing SVG files. From version 1.0.0 until versions 2.8.4, 3.3.5, and 4.1.0, the opt-in removeScripts plugin, named removeScriptElement in versions 2 and 3, incompletely filters executable links in plugins/removeScripts.js and lib/svgo/tools.js. The plugin does not recognize namespace-prefixed SVG anchor elements such as svg:a with href or namespaced *:href values, and it does not remove ASCII tab, line-feed, or carriage-return characters before checking URL schemes. Browsers remove those characters before parsing a scheme, allowing an executable link to pass the plugin's check. When an application processes attacker-controlled SVG input and serves the result in an active browser context, a victim who activates the surviving link can execute script in the SVG's origin, expose data, modify content, or perform actions as the victim. This issue is fixed in versions 2.8.4, 3.3.5, and 4.1.0. | ||||
| CVE-2026-84269 | 1 Redhat | 1 Enterprise Linux | 2026-09-04 | 6.5 Medium |
| A flaw was found in the AFP backend in gvfs. When mounting a share, a malicious AFP server can cause the DSI read path to process a length that exceeds the size requested by the client. The function does not verify the server-provided length against the pre-sized reply buffer, causing the operation to access past the intended boundaries. This issue allows a malicious server to overflow a heap buffer and crash the gvfsd-afp process, resulting in a denial of service. | ||||
| CVE-2026-85218 | 1 Bluez | 1 Bluez | 2026-09-04 | 7.1 High |
| A double stack-based buffer overflow was found in the BlueZ AVRCP controller implementation. A nearby BR/EDR peripheral can send a crafted AVRCP player-settings response that supplies an attacker-controlled attribute count, causing avrcp_list_player_attributes_rsp() and avrcp_get_current_player_value() in profiles/audio/avrcp.c to write attacker-controlled data past fixed-size stack buffers, potentially leading to a crash or code execution in the bluetoothd daemon. | ||||
| CVE-2026-85052 | 1 Google | 1 Chrome | 2026-09-03 | 3.1 Low |
| Out of bounds read in CrashReporting in Google Chrome prior to 152.0.7977.82 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-84144 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 7.5 High |
| Internally found bugs present in Thunderbird 154 and Thunderbird ESR 153.1. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 153.2, Thunderbird 155, and Thunderbird 153.2. | ||||
| CVE-2026-85393 | 1 Digitalbazaar | 1 Forge | 2026-09-03 | 7.5 High |
| node-forge through 1.4.0 fails to validate element count in nested DigestAlgorithm sequences during RSA PKCS#1 v1.5 signature verification. Attackers can embed garbage bytes inside the DigestAlgorithm sequence to forge valid signatures for arbitrary messages using low-exponent RSA keys. This is an incomplete fix for CVE-2026-33894. | ||||
| CVE-2026-15431 | 2 Hp, Hp Inc. | 2 Support Assistant, Hp Support Assistant | 2026-09-03 | N/A |
| A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.53.2.0. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls. | ||||
| CVE-2026-84142 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 9.8 Critical |
| Internally found bugs present in Thunderbird 154. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155 and Thunderbird 155. | ||||