Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390121 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390121 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53185 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_bvec_write_partial() zram_read_page() picks the sync or async backing device read path based on whether the parent bio is NULL. zram_bvec_write_partial() passes its parent bio down, so for ZRAM_WB slots the read is dispatched asynchronously and zram_read_page() returns 0 while the bio is still in flight. The caller then runs memcpy_from_bvec(), zram_write_page() and __free_page() on the buffer, leaving the async read to write into a freed page. zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d ("zram: fix synchronous reads") for the same reason; the write_partial counterpart was missed. | ||||
| CVE-2026-53071 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||
| CVE-2026-53009 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any. | ||||
| CVE-2026-53006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. | ||||
| CVE-2026-53000 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook. | ||||
| CVE-2026-4926 | 2 Path-to-regexp, Pillarjs | 2 Path-to-regexp, Path-to-regexp | 2026-09-09 | 7.5 High |
| Impact: A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service. Patches: Fixed in version 8.4.0. Workarounds: Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns. | ||||
| CVE-2026-47691 | 1 Netty | 1 Netty | 2026-09-09 | 8.7 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-46189 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path Sashiko points out that pvrdma_uar_free() is already called within pvrdma_dealloc_ucontext(), so calling it before triggers a double free. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||
| CVE-2026-46099 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-45674 | 1 Netty | 1 Netty | 2026-09-09 | 8.7 High |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's DnsResolveContext fails to validate the origin (bailiwick) of CNAME records in DNS responses. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | ||||
| CVE-2026-44990 | 1 Apostrophecms | 1 Sanitize-html | 2026-09-09 | 9.3 Critical |
| ApostropheCMS is an open-source Node.js content management system, and sanitize-html provides a simple HTML sanitizer with a clear API. Under the default configuration, versions of `sanitize-html` prior to 2.17.4 can turn attacker-controlled content inside a disallowed `xmp` element into live HTML or JavaScript. This is a sanitizer bypass in the default `disallowedTagsMode: 'discard'` path and can lead to stored XSS in applications that render sanitized output back to users. Version 2.17.4 patches the issue. | ||||
| CVE-2026-44673 | 1 Cesnet | 1 Libyang | 2026-09-09 | 7.5 High |
| libyang is a YANG data modeling language library. Prior to SO 5.2.15, lyb_read_string() in src/parser_lyb.c contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary blob. An attacker who can supply LYB data to any libyang consumer (NETCONF server, sysrepo, etc.) can trigger a crash or potential heap corruption. This vulnerability is fixed in SO 5.2.15. | ||||
| CVE-2026-43114 | 1 Linux | 1 Linux Kernel | 2026-09-09 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | ||||
| CVE-2026-42579 | 1 Netty | 1 Netty | 2026-09-09 | 7.5 High |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, Netty's DNS codec does not enforce RFC 1035 domain name constraints during either encoding or decoding. This creates a bidirectional attack surface: malicious DNS responses can exploit the decoder, and user-influenced hostnames can exploit the encoder. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | ||||
| CVE-2026-42151 | 1 Prometheus | 1 Prometheus | 2026-09-09 | 7.5 High |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3. | ||||
| CVE-2026-42027 | 1 Apache | 1 Opennlp | 2026-09-09 | 9.8 Critical |
| Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader Versions Affected: before 1.9.5, before 2.5.9, before 3.0.0-M3 Description: The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class. Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check. Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes. Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization. | ||||