Export limit exceeded: 96491 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (96491 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80734 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | ||||
| CVE-2026-80732 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. | ||||
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-80754 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. | ||||
| CVE-2026-80735 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: ensure socket is owned by ovpn before deref sk_user_data Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads. | ||||
| CVE-2026-80737 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: synchronize DMA teardown dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers. | ||||
| CVE-2026-80748 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: loongson2: Fix sg iteration in data reorder functions In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(), the for_each_sg() macro already iterates over the scatterlist entries, with 'sg' pointing to the current entry. However, the code incorrectly uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats 'sg' as an array base and indexes it again, leading to access of wrong sg entries (or out-of-bounds if the list is not an array). | ||||
| CVE-2026-80750 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix remaining %pOF after of_node_put() scpsys_get_bus_protection_legacy() looks up several legacy bus protection regmaps from device-tree nodes. Two error paths put the device node before checking whether the regmap lookup failed, but still pass that node to dev_err_probe() with %pOF on failure. If of_node_put() drops the last reference, the later %pOF formatting can dereference a freed device node. Keep the node reference until after the error message has been emitted in the infracfg and SMI lookup paths. Also drop the SMI node before returning when the SMI phandle is missing. | ||||
| CVE-2024-7837 | 1 Firmanet | 1 Erp | 2026-09-04 | 8.2 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Firmanet Software ERP allows SQL Injection. This issue affects ERP: before 15.0.1. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2026-80751 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev() mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop, in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned at the end of the loop body. On that first iteration, evaluating prev_o reads an indeterminate value. If it is non-NULL, the condition dereferences a stale or invalid pointer, potentially faulting or incorrectly skipping the first OPP. Initialize prev_o to NULL. This matches the intent as well: there is no previous OPP to compare against on the first iteration. Found with Clang's -Wconditional-uninitialized. | ||||
| CVE-2026-80736 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix bandwidth group reservation indexing Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. | ||||
| CVE-2026-80741 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix out-of-bounds read on empty message length drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing newline, but len is unsigned int. If len is 0, the subtraction wraps to UINT_MAX, causing an out-of-bounds read. Add an early return when len is 0. | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80749 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/connector/hdmi: Fix out of bounds memory read A helper function was copying a given audio infoframe into the connector's copy but using the size of the destination (a generic target, sized to accept many different data blocks) not the source (a very specific type of data block). Thus, it was copying 60 bytes of data from a 28 byte allocation. Fix that by using the source size instead, together with a build bug on the source size actually being smaller than the destination. I hit this running KUnit tests under KASAN (while debugging something else entirely). In the real world, it seems unlikely to cause an actual problem. It is a read not a write so it can't corrupt any memory. However, it could potentially fall off the end of a page and cause an accvio bug. | ||||
| CVE-2026-85505 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 7.5 High |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer over-read in ipmi_oem_fujitsu_get_sel_entry_long_text in ipmi-oem/ipmi-oem-fujitsu.c when a BMC provides a short response, a different vulnerability than CVE-2026-50031 (which has different affected versions). | ||||
| CVE-2026-80752 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: psxpad-spi - set driver data before use psxpad_spi_suspend() retrieves the controller state with spi_get_drvdata(), but probe never stores it, so suspend dereferences a NULL pointer. Store it during probe. | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-75034 | 1 Suse | 1 Rancher | 2026-09-04 | 7.4 High |
| A flaw was found in Rancher Manager. The SAML assertion replay protection introduced by the fix for CVE-2026-44946 recorded consumed assertion IDs in a per-process cache, so each replica only detected replays that reached the same pod. In a high-availability deployment, an attacker holding a captured assertion could replay it once against every other replica to obtain additional authenticated sessions as the victim. This issue affects Rancher: before 2.15.1. | ||||
| CVE-2026-84794 | 1 Craftcms | 1 Craft Cms | 2026-09-04 | 7.1 High |
| Craft CMS versions before 5.10.11 lack authorization checks in the assets/move-asset endpoint when force=1 is supplied. Authenticated users without peer asset permissions can move their own assets into other users' folders and force deletion of conflicting files, allowing unauthorized asset deletion and replacement. | ||||