Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 423976 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74396 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR XLT cleanup on ODP populate failure mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path through mlx5r_umr_unmap_free_xlt(). After mlx5_odp_populate_xlt() became fallible, its error path returned directly and skipped that cleanup. This leaks the XLT DMA mapping and buffer. If the emergency XLT page was used, it also leaves xlt_emergency_page_mutex locked. Break out of the loop so execution falls through the existing cleanup path. | ||||
| CVE-2026-74394 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: fix integer overflow in immediate data length check imm_buf->len is a user-controlled uint32_t received from the network. Adding it to imm_data_offset without overflow checking allows a malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap around to a small value, bypassing the bounds check, and subsequently passing a ~4GB length to sg_init_one(). Use check_add_overflow() to detect wrapping before the comparison. | ||||
| CVE-2026-74390 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. | ||||
| CVE-2026-96958 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Inefficient algorithmic complexity in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-96959 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Allocation of resources without limits or throttling in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-96960 | 3 Apple, Linux, Microsoft | 20 Macos, Linux Kernel, .net and 17 more | 2026-10-16 | 7.5 High |
| Asymmetric resource consumption (amplification) in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-74387 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize output teardown with event_input event_process_midi() borrows msynth->output_rfile.output and then passes the substream to dump_midi() and snd_rawmidi_kernel_write() without synchronizing with the output open/close transition. midisynth_use() also publishes output_rfile before snd_rawmidi_output_params() has finished. The last midisynth_unuse() can therefore release the same rawmidi file and free substream->runtime before snd_rawmidi_kernel_write1() takes its runtime buffer reference. That leaves the event_input path using a stale substream or runtime and can end in a NULL-deref or use-after-free. Fix this with two pieces of synchronization. Keep a short IRQ-safe spinlock only for publishing or clearing output_rfile and for pairing the output snapshot with an snd_use_lock_t reference. Once event_process_midi() has taken that in-flight reference, it drops the spinlock before calling snd_seq_dump_var_event(), dump_midi(), or snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible rawmidi file under the same spinlock, waits for the in-flight writers to drain, and only then drains and releases the saved file. midisynth_use() likewise opens into a local snd_rawmidi_file and publishes it only after snd_rawmidi_output_params() succeeds. The buggy scenario involves two paths, with each column showing the order within that path: event_input path: last unuse path: 1. event_process_midi() snapshots 1. midisynth_unuse() starts output_rfile.output. tearing down output_rfile. 2. dump_midi() reaches 2. snd_rawmidi_kernel_release() snd_rawmidi_kernel_write() closes the output file. before runtime is pinned. 3. close_substream() frees 3. The callback keeps using substream->runtime. the borrowed substream. Validation reproduced this kernel report: KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360 RIP: 0033:0x7fde7dd0837f RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 | ||||
| CVE-2026-74384 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix flex array size in struct nvme_ns_head struct nvme_ns_head contains a flexible array member, current_path[], which is indexed using the NUMA node ID: head->current_path[numa_node_id()] The structure is currently allocated as: size = sizeof(struct nvme_ns_head) + (num_possible_nodes() * sizeof(struct nvme_ns *)); head = kzalloc(size, GFP_KERNEL); This allocation assumes that NUMA node IDs are sequential and densely packed from 0 .. num_possible_nodes() - 1. While this assumption holds on many systems, it is not always true on some architectures such as powerpc. On some powerpc systems, NUMA node IDs can be sparse. For example: NUMA: NUMA node(s): 6 NUMA node0 CPU(s): 80-159 NUMA node8 CPU(s): 0-79 NUMA node252 CPU(s): NUMA node253 CPU(s): NUMA node254 CPU(s): NUMA node255 CPU(s): That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255 In this case: num_possible_nodes() = 6 So memory is allocated for only 6 entries in current_path[]. However, the array is later indexed using the actual NUMA node ID. As a result, accesses such as: head->current_path[8] or head->current_path[252] goes out of bounds, leading to the following KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997 CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy) Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Workqueue: async async_run_entry_fn Call Trace: [c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable) [c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c [c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220 [c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120 [c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] [c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core] [c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core] [c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core] [c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0 [c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10 [c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640 [c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290 [c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 Allocated by task 1997 on cpu 1 at 35.928317s: The buggy address belongs to the object at c00020003bda3000 which belongs to the cache kmalloc-rnd-15-2k of size 2048 The buggy address is located 16 bytes to the right of allocated 1448-byte region [c00020003bda3000, c00020003bda35a8) The buggy address belongs to the physical page: Memory state around the buggy address: c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ^ c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix this by allocating the flexible array using nr_node_ids instead of num_possible_nodes(). Since nr_node_ids represents the maximum possible NUMA node IDs, indexing current_path[] using numa_node_id() becomes safe even on systems with sparse node IDs. | ||||
| CVE-2026-74380 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix iommu_map_sgtable() return value check Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. pin_job() also was incorrectly assigning to 'int', which could cause overflows into negative values. Update pin_job() to correctly check for errors from iommu_map_sgtable. | ||||
| CVE-2026-74378 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | ||||
| CVE-2026-74377 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP. | ||||
| CVE-2026-74376 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: reset read_slot when reusing r10bio for discard put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. | ||||
| CVE-2026-74367 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix inconsistent arvif state in vdev_create error paths ath12k_mac_vdev_create() has three error path issues that leave arvif in an inconsistent state: 1. When ath12k_wmi_vdev_create() fails, the function returns directly without clearing arvif->ar, which was already set before the WMI call. Subsequent code checking arvif->ar to determine vdev readiness will see a non-NULL value despite no vdev existing in firmware. 2. When ath12k_wmi_send_peer_delete_cmd() fails in err_peer_del, the code jumped to err: skipping the DP peer cleanup and vdev rollback, leaving num_created_vdevs, vdev maps and arvif list membership live. 3. When ath12k_wait_for_peer_delete_done() fails, the code jumped to err_vdev_del: skipping the DP peer cleanup. Fix by changing the ath12k_wmi_vdev_create() failure to goto err instead of returning directly, routing both err_peer_del failure paths through err_dp_peer_del: for proper DP peer and vdev rollback, and consolidating the arvif state cleanup at err:. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74365 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Handle preemption in BTT lane acquisition BTT lanes serialize access to per-lane metadata and workspace state during BTT I/O. The btt-check unit test reports data mismatches during BTT writes due to a race in lane acquisition that can lead to silent data corruption. The existing lane model uses a spinlock together with a per-CPU recursion count. That recursion model stopped being valid after BTT lanes became preemptible: another task can run on the same CPU, observe a non-zero recursion count, bypass locking, and use the same lane concurrently. BTT lanes are also held across arena_write_bytes() calls. That path reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush(). Some provider flush callbacks can sleep, making a spinlock the wrong primitive for the lane lifetime. Replace the spinlock-based recursion model with a dynamically allocated per-lane mutex array and take the lane lock unconditionally. Add might_sleep() to catch any future atomic-context caller. Found with the ndctl unit test btt-check.sh. | ||||
| CVE-2026-74363 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF | ||||
| CVE-2026-74361 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). | ||||
| CVE-2026-74359 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... | ||||
| CVE-2026-74355 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix RB-tree corruption in probe error path The info->node RB-tree member is zero-initialized via kzalloc. If a device does not support ATS, the device_rbtree_insert() call is skipped. If a subsequent probe step fails, the error path jumps to device_rbtree_remove(), which misinterprets the zeroed node as a tree root and corrupts the device RB-tree. Fix this by explicitly initializing the RB-node as empty using RB_CLEAR_NODE() during initialization and guarding the removal with RB_EMPTY_NODE(). | ||||
| CVE-2026-74354 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done. | ||||
| CVE-2026-74349 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. | ||||