Export limit exceeded: 23566 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23566 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-21640 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used. | ||||
| CVE-2025-21638 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. | ||||
| CVE-2025-21637 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. | ||||
| CVE-2025-21629 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets The blamed commit disabled hardware offoad of IPv6 packets with extension headers on devices that advertise NETIF_F_IPV6_CSUM, based on the definition of that feature in skbuff.h: * * - %NETIF_F_IPV6_CSUM * - Driver (device) is only able to checksum plain * TCP or UDP packets over IPv6. These are specifically * unencapsulated packets of the form IPv6|TCP or * IPv6|UDP where the Next Header field in the IPv6 * header is either TCP or UDP. IPv6 extension headers * are not supported with this feature. This feature * cannot be set in features for a device with * NETIF_F_HW_CSUM also set. This feature is being * DEPRECATED (see below). The change causes skb_warn_bad_offload to fire for BIG TCP packets. [ 496.310233] WARNING: CPU: 13 PID: 23472 at net/core/dev.c:3129 skb_warn_bad_offload+0xc4/0xe0 [ 496.310297] ? skb_warn_bad_offload+0xc4/0xe0 [ 496.310300] skb_checksum_help+0x129/0x1f0 [ 496.310303] skb_csum_hwoffload_help+0x150/0x1b0 [ 496.310306] validate_xmit_skb+0x159/0x270 [ 496.310309] validate_xmit_skb_list+0x41/0x70 [ 496.310312] sch_direct_xmit+0x5c/0x250 [ 496.310317] __qdisc_run+0x388/0x620 BIG TCP introduced an IPV6_TLV_JUMBO IPv6 extension header to communicate packet length, as this is an IPv6 jumbogram. But, the feature is only enabled on devices that support BIG TCP TSO. The header is only present for PF_PACKET taps like tcpdump, and not transmitted by physical devices. For this specific case of extension headers that are not transmitted, return to the situation before the blamed commit and support hardware offload. ipv6_has_hopopt_jumbo() tests not only whether this header is present, but also that it is the only extension header before a terminal (L4) header. | ||||
| CVE-2026-64313 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition. | ||||
| CVE-2026-64463 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci_rt1711h: unregister TCPCI port with devres rt1711h_probe() registers the TCPCI port before requesting the interrupt and enabling alert interrupts. If either of those later steps fails, the probe function returns without unregistering the TCPCI port. The explicit unregister currently only happens from the remove callback. Register a devres action immediately after tcpci_register_port() succeeds, so tcpci_unregister_port() runs on later probe failures and on driver detach. Drop the remove callback to avoid unregistering the same port twice. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-64467 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: use a u64 stride when cleaning up the offsets array Allocation's Drop walks the offsets array (binder_size_t = u64 entries), cleaning up the objects, but it used usize instead of u64 for both the stride and the per-entry read. On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels it walks the 8-byte entries in 4-byte steps, iterating an N-entry array 2N times, and reads the always-zero high word as offset 0, cleaning up the object at offset 0 N extra times. As a result the referenced node or handle ends up with a lower reference count than it actually has (a refcount over-decrement), and binder's reference accounting is corrupted; for example, the owner can be notified of a strong reference release (BR_RELEASE) even though references still remain. Change the stride to u64, and read each entry as a u64, narrowing it to usize with try_into(). On 32-bit ARM, when this over-decrement would drive a count below zero, the driver's existing refcount guard refuses it and fires: rust_binder: Failure: refcount underflow! | ||||
| CVE-2026-64483 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. | ||||
| CVE-2026-64487 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. | ||||
| CVE-2026-64488 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aoa: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. | ||||
| CVE-2026-64504 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. | ||||
| CVE-2026-13776 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-07-29 | 9.6 Critical |
| Type Confusion in Dawn in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-13855 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-29 | 7.5 High |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-15777 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-07-29 | 7.5 High |
| Use after free in UI in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-53359 | 1 Linux | 1 Linux Kernel | 2026-07-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | ||||
| CVE-2026-53264 | 1 Linux | 1 Linux Kernel | 2026-07-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: use RCU with deferred freeing for action lifecycle When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur. | ||||
| CVE-2026-14996 | 2 Ibm, Linux | 3 Aspera Faspex, Aspera Faspex 5, Linux Kernel | 2026-07-29 | 8.2 High |
| IBM Aspera Faspex 5 5.0.0 through 5.0.15.4 has addressed a vulnerability related to session management. | ||||
| CVE-2023-1829 | 2 Linux, Redhat | 7 Linux Kernel, Enterprise Linux, Rhel Aus and 4 more | 2026-07-29 | 7.8 High |
| A use-after-free vulnerability in the Linux Kernel traffic control index filter (tcindex) can be exploited to achieve local privilege escalation. The tcindex_delete function which does not properly deactivate filters in case of a perfect hashes while deleting the underlying structure which can later lead to double freeing the structure. A local attacker user can use this vulnerability to elevate its privileges to root. We recommend upgrading past commit 8c710f75256bb3cf05ac7b1672c82b92c43f3d28 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/ . | ||||
| CVE-2026-14958 | 2 Ibm, Linux | 3 Aspera Faspex, Aspera Faspex 5, Linux Kernel | 2026-07-29 | 9.1 Critical |
| IBM Aspera Faspex 5 5.0.0 through 5.0.15.4 could allow a remote authenticated attacker to execute arbitrary code due to unquoted shell interpolation. | ||||
| CVE-2026-14959 | 2 Ibm, Linux | 3 Aspera Faspex, Aspera Faspex 5, Linux Kernel | 2026-07-29 | 9.1 Critical |
| IBM Aspera Faspex 5 5.0.0 through 5.0.15.4 could allow a remote authenticated attacker to execute arbitrary code due to shell command injection. | ||||