Export limit exceeded: 23516 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390708 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390708 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80934 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames (MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is always zero, so the unmap loop runs zero times and the skb DMA mapping in buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the generic DMA-ring cleanup skips it as well. Each AddBA req therefore leaks one TX DMA mapping, roughly one per (re)association. With WED enabled these mappings are bounced through the WED swiotlb pool, so under continuous client reconnect churn the pool is exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi MCU and other on-SoC consumers. Keep the deferred (token release) unmap that the design relies on, and add an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps buf[1] from the MAC-TXP layout for those frames, delegating to mt76_connac_txp_skb_unmap() otherwise. | ||||
| CVE-2026-80933 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate default EEPROM firmware size The default EEPROM firmware is parsed and copied as a full EEPROM without checking its length. A truncated file can make the driver read beyond the firmware buffer during variant validation or the fallback copy. Reject files shorter than MT7996_EEPROM_SIZE before parsing or copying the firmware. | ||||
| CVE-2026-80932 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush. | ||||
| CVE-2026-80931 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That check runs after master_xfer returns. By then the write is already done. i2c-algo-bit rejects an oversize length before it copies, and returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the same way i2c-algo-bit does. | ||||
| CVE-2026-80930 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the interrupt handler to report a status change. If the wait times out, or is interrupted before the handler runs, the function returns without balancing the enable_irq() call. Disable the IRQ before leaving the failed wait path. Also preserve an interrupted wait's original error code instead of converting it to -ETIMEDOUT inside the helper. | ||||
| CVE-2026-80929 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] cad_pid is global, and kill_cad_pid() is only used in the root namespace. However, due to pid_table_root_permissions(), a non-root user can unshare pid/user namespaces and modify it from the child namespace. This makes no sense and is simply wrong. Move it to kern_reboot_table[] where it logically belongs; this ensures that only GLOBAL_ROOT_UID can read/modify this sysctl. Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always set when kern_reboot_table[] is compiled. | ||||
| CVE-2026-80928 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race. | ||||
| CVE-2026-80927 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.8 Low |
| In the Linux kernel, the following vulnerability has been resolved: timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex() If the auxiliary clock is disabled during tk_get_aux_ts64() but is enabled before tks->clock_valid is checked, then uninitialized stackdata will be used in the calculations and indirectly leaked to userspace. The same race window also exists after this change and also for the core timekeeper. But in these cases the only effect would be incorrect adjustments and this is userspace's responsibility to avoid this. | ||||
| CVE-2026-80926 | 1 Linux | 1 Linux Kernel | 2026-09-11 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in oplock break notification smb2_oplock_break_noti() reads opinfo->conn without any lock and dereferences it after two allocations which may sleep. When the durable handle owning the oplock is disconnected, session_fd_check() clears opinfo->conn and drops its conn reference under ci->m_lock, and the last ksmbd_conn_put() frees the connection. A break triggered by another connection that races with the teardown can then resurrect the freed connection: ksmbd_conn_get() is a plain atomic_inc, and the queued break work later dereferences the stale conn via ksmbd_conn_write(), a use-after-free reachable by any authenticated client holding a durable batch oplock. Thread the caller's inode into the notification path instead of taking a new reference on it. Every caller of oplock_break() already holds a live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference, in the parent lease break paths) on the inode that owns the break target's oplock list, so ci cannot be freed during the call, and its lock can be taken without dereferencing opinfo->o_fp, which a concurrent close may free. Select and pin the connection under ci->m_lock, the same lock session_fd_check() and ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent detach either loses the race to the clear or keeps the connection alive until the notification work releases it. Transfer the reference to the work item and release it on allocation failures. | ||||
| CVE-2026-7888 | 1 Concretecms | 1 Concrete Cms | 2026-09-11 | N/A |
| Concrete CMS below 9.5.3 is vulnerable to PHP Object Injection via unserialize() calls in the Workflow, Form block, and File/Set components that lack the allowed_classes restriction. The Form block and File/Set sinks were addressed in 9.5.2; the Workflow component sinks were addressed in 9.5.3. An unauthenticated attacker may trigger arbitrary PHP object instantiation if a malicious serialized payload has been placed in the database. Thanks XananasX7 and Sanjorn Keeratirungsan (dizconnect) for independently reporting the original components, and sh4d0byss for reporting the Workflow component wasn't fixed in 9.5.2. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 8.4 with vector CVSS:4.0/AV:L/AC:L/AT:N/PR:H/UI:N/ VC:H/VI:H/VA:H/SC:N/SI:N/SA:N. | ||||
| CVE-2026-7298 | 2026-09-11 | 6.1 Medium | ||
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in IdeaSoft Software Industry and Trade Inc. Smart E-Commerce allows Reflected XSS. This issue affects Smart E-Commerce: through 11092026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-79395 | 2026-09-11 | 9.8 Critical | ||
| An improper authentication vulnerability in the WS-Security (wsse:UsernameToken) verification routine within the Sofia IPC daemon in Xiongmai IP Camera XM530 firmware HMT.CM2005-v220608.1837 and earlier allows remote attackers to bypass authentication and execute privileged ONVIF actions (including PTZ control, stream URL retrieval, and system reboot) via a crafted SOAP request supplying the admin username with any arbitrary password when the account's stored password is empty. | ||||
| CVE-2026-79035 | 2026-09-11 | N/A | ||
| A reflected cross-site scripting (XSS) vulnerability in the p.rfihub.com component of Zeta Marketing Platform (ZMP) v1.0 allows attackers to execute arbitrary Javascript in the context of the victim's browser via injecting a crafted URL into the ca parameter. | ||||
| CVE-2026-78547 | 2026-09-11 | N/A | ||
| Out-of-bounds write vulnerability in Citrix Citrix Workspace app for Windows. This issue affects Citrix Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. | ||||
| CVE-2026-78546 | 2026-09-11 | N/A | ||
| Out-of-bounds read vulnerability in Citirx Workspace app for Windows. This issue affects Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. | ||||
| CVE-2026-69237 | 1 Esri | 1 Portal For Arcgis | 2026-09-11 | 3.8 Low |
| There is an HTML injection vulnerability in Esri Portal for ArcGIS versions 11.3 and prior that allows a remote attacker with administrative privileges to insert arbitrary HTML into an administrative API. Users working with ArcGIS Enterprise 11.1, and 11.3 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. | ||||
| CVE-2026-68528 | 2026-09-11 | N/A | ||
| Concrete CMS RSS Displayer block below version 9.5.3 rendered remote feed item titles without HTML escaping, resulting in stored cross-site scripting. An attacker able to control a title in a syndicated feed could execute script in the site origin for any visitor to the affected page, including administrators, without holding an account on that site. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 6.0 with vector CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:P/VC:H/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks riodrwn for reporting. | ||||
| CVE-2026-68526 | 2026-09-11 | N/A | ||
| Concrete CMS before 9.5.3 did not validate an anti-CSRF token in the Calendar event duplicate dialog controller (concrete/controllers/dialog/event/duplicate.php) submit() action, which duplicated a calendar event after checking only canAccess() and the per-resource canAddCalendarEvent() permission, so a crafted cross-site request could cause an authenticated user with add-event permission to create duplicate CalendarEvents and CalendarEventVersions records under their own authority. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.3 with vector CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:P/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Winston Crooker for reporting. | ||||
| CVE-2026-54135 | 2026-09-11 | 7.5 High | ||
| AirSane is a SANE frontend, and a scanner server that supports Apple's AirScan protocol. Versions prior to 0.4.12 have a vulnerability in the custom HTTP server implementation of AirSane that allows a remote unauthenticated attacker to cause a Denial of Service (DoS) via memory exhaustion (OOM). In httpserver.cpp, the HttpServer::Request::content function reads the Content-Length header and directly passes this value to std::string::resize() without any upper-bound validation or safe parsing. An attacker can send an HTTP POST request with an artificially large Content-Length value. This forces the daemon to attempt allocating gigabytes of memory, resulting in a std::bad_alloc exception and immediately crashing the AirSane process. Additionally, providing non-numeric characters in the Content-Length header leads to undefined behavior (NaN to integer conversion) due to the lack of error handling during header parsing. Version 0.4.12 patches the issue. | ||||
| CVE-2026-54047 | 2026-09-11 | N/A | ||
| Laci Synchroni is a decentralized mod and appearance sync server and plugin for Dalamud. Versions of the backend prior to 1.2.3 have an improper authentication vulnerability in the application's OAuth2 login flow. The application relies on client-side state by trusting the `UID` field inside the `Authentications` object of a user's local `config.json` file. By manually editing this local file on their PC prior to logging in, a user can supply an arbitrary UID. Because the server fails to validate that the authenticated OAuth2 identity matches the requested UID, an attacker can fully impersonate any target user and perform actions on their behalf. This issue has been resolved in version 1.2.3. The patch modifies `AuthorizeOauthAsync` inside the `SecretKeyAuthenticatorService` to strictly bind the lookup of the requested User ID (`requestedUid`) to the record of the successfully authenticated identity (`primaryUid`). The server will no longer load or return session tokens for a requested UID unless it matches the verified, authenticated database record. No known workarounds are available. | ||||