Export limit exceeded: 424104 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68330 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern. | ||||
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-45864 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 | ||||
| CVE-2026-45883 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: sca3000: Fix a resource leak in sca3000_probe() spi->irq from request_threaded_irq() not released when iio_device_register() fails. Add an return value check and jump to a common error handler when iio_device_register() fails. | ||||
| CVE-2026-45889 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops. | ||||
| CVE-2026-45918 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - don't deref NULL sk_socket member after tcp_close() When deleting a peer in case of keepalive expiration, the peer is removed from the OpenVPN hashtable and is temporary inserted in a "release list" for further processing. This happens in: ovpn_peer_keepalive_work() unlock_ovpn(release_list) This processing includes detaching from the socket being used to talk to this peer, by restoring its original proto and socket ops/callbacks. In case of TCP it may happen that, while the peer is sitting in the release list, userspace decides to close the socket. This will result in a concurrent execution of: tcp_close(sk) __tcp_close(sk) sock_orphan(sk) sk_set_socket(sk, NULL) The last function call will set sk->sk_socket to NULL. When the releasing routine is resumed, ovpn_tcp_socket_detach() will attempt to dereference sk->sk_socket to restore its original ops member. This operation will crash due to sk->sk_socket being NULL. Fix this race condition by testing-and-accessing sk->sk_socket atomically under sk->sk_callback_lock. | ||||
| CVE-2026-46142 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix VF illegal register access Register WX_CFG_PORT_ST is a PF restricted register. When a VF is initialized, attempting to read this register triggers an illegal register access, which lead to a system hang. When the device is VF, the bus function ID can be obtained directly from the PCI_FUNC(pdev->devfn). | ||||
| CVE-2026-68440 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix heap overflow when reading module EEPROM txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes into the caller buffer, which ethtool allocates with exactly 'length' bytes. A non-4-aligned length therefore causes an out-of-bounds write. Copy only the remaining bytes on the final dword instead. | ||||
| CVE-2026-68420 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: reject optional IPTFS templates in outbound policies syzbot reported a stack-out-of-bounds read in xfrm_state_find() which flows from xfrm_tmpl_resolve_one(). Commit 3d776e31c841 ("xfrm: Reject optional tunnel/BEET mode templates in outbound policies") disallowed optional tunnel and BEET in outbound policies to prevent this. Later when IPTFS added, it was not covered by that fix and can still trigger the out-of-bounds read; Extend the check to disallow optional IPTFS in outbound policies as well. IPTFS should be identical to tunnel mode. IN and FWD policies are not affected: xfrm_tmpl_resolve_one() is only reachable via the outbound path. Reproducer, before: ip link add dummy0 type dummy ip link set dummy0 up ip addr add 10.1.1.1/24 dev dummy0 ip xfrm policy add src 10.1.1.1/32 dst 10.1.1.2/32 dir out tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 1 mode iptfs level use tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 2 mode transport ping -W 1 -c 1 10.1.1.2 PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data. [ 64.168420] ================================================================== [ 64.169977] BUG: KASAN: stack-out-of-bounds in __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] Read of size 4 at addr ffff88800e1ffd20 by task ping/2844 [ 64.169977] CPU: 2 UID: 0 PID: 2844 Comm: ping Not tainted 7.1.0-rc7-00180-geb23b588430a #98 PREEMPT(full) [ 64.169977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 64.169977] Call Trace: [ 64.169977] <TASK> [ 64.169977] dump_stack_lvl+0x47/0x70 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] print_report+0x152/0x4b0 [ 64.169977] ? ksys_mmap_pgoff+0x6d/0xa0 [ 64.169977] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 64.169977] ? rcu_read_unlock_sched+0xa/0x20 [ 64.169977] ? __virt_addr_valid+0x21b/0x230 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] kasan_report+0xa8/0xd0 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm_dst_hash+0x24/0xc0 [ 64.169977] xfrm_state_find+0xa2d/0x2f90 [ 64.169977] ? __pfx_xfrm_state_find+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] xfrm_tmpl_resolve_one+0x210/0x570 [ 64.169977] ? __pfx_xfrm_tmpl_resolve_one+0x10/0x10 [ 64.169977] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 64.169977] ? kernel_text_address+0x5b/0x80 [ 64.169977] ? __kernel_text_address+0xe/0x30 [ 64.169977] ? unwind_get_return_address+0x5e/0x90 [ 64.169977] ? arch_stack_walk+0x8c/0xe0 [ 64.169977] xfrm_tmpl_resolve+0x130/0x200 [ 64.169977] ? __pfx_xfrm_tmpl_resolve+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_inexact_lookup_rcu+0x10/0x10 [ 64.169977] ? __refcount_add_not_zero.constprop.0+0xb2/0x110 [ 64.169977] ? __pfx___refcount_add_not_zero.constprop.0+0x10/0x10 [ 64.169977] xfrm_resolve_and_create_bundle+0xd5/0x310 [ 64.169977] ? __pfx_xfrm_resolve_and_create_bundle+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] xfrm_lookup_with_ifid+0x3d8/0xb80 [ 64.169977] ? __pfx_xfrm_lookup_with_ifid+0x10/0x10 [ 64.169977] ? ip_route_output_key_hash+0xc6/0x110 [ 64.169977] ? kasan_save_track+0x10/0x30 [ 64.169977] xfrm_lookup_route+0x18/0xe0 [ 64.169977] ip4_datagram_release_cb+0x4c9/0x530 [ 64.169977] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 64.169977] ? do_raw_spin_lock+0x71/0xc0 [ 64.169977] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 64.169977] release_sock+0xb0/0x170 [ 64.169977] udp_connect+0x43/0x50 [ 64.169977] __sys_connect+0xa6/0x100 [ 64.169977] ? alloc_fd+0x2e9/0x300 [ 64.169977] ? __pfx___sys_connect+0x10/0x10 [ 64.169977] ? preempt_latency ---truncated--- | ||||
| CVE-2026-68390 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups hci_conn_params_lookup requires hdev->lock be held, otherwise the list iteration or param access is not safe. Hold hdev->lock for params lookups in hci_sync. | ||||
| CVE-2026-68389 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Clear memdump state on invalid dump size qca_controller_memdump() allocates qca->qca_memdump before processing the first dump packet. For a sequence-zero packet it then disables IBS, marks memdump collection active, and reads the advertised dump size. If the controller reports a zero dump size, the error path frees the local qca_memdump object and returns without clearing qca->qca_memdump or undoing the collection state. A later memdump work item initializes its local pointer from qca->qca_memdump and skips allocation when that pointer is non-NULL, so it can operate on freed memory. The stale collection and IBS-disabled flags can also leave waiters or later transmit handling blocked behind an aborted dump. Clear the saved pointer and memdump state before returning from the invalid-size path, matching the cleanup used when hci_devcd_init() fails. A static analysis checker reported the stale memdump state, and manual source review confirmed the invalid-size failure path. | ||||
| CVE-2026-68387 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: raw: add locking for raw flags bitfield With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") the formerly separate integer values have been integrated into a single bitfield. This led to a read-modify-write operation when changing a flag in raw_setsockopt() which now needs a locking to prevent concurrent access. Instead of adding a lock/unlock hell in each of the flag manipulations this patch introduces a wrapper for a new raw_setsockopt_locked() function analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c [mkl: use Closes tag instead of Link] | ||||
| CVE-2026-68380 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free of mm_struct in job scheduler amdxdna_cmd_submit() stores current->mm in job->mm without holding any reference. aie2_sched_job_run() later access job->mm from the DRM scheduler worker thread. With only a raw pointer and no structural reference, the mm_struct can be freed before the scheduler runs the job. Fix this by calling mmgrab() to hold a structural mm_count reference for the lifetime of the job, paired with mmdrop() in every cleanup path. | ||||
| CVE-2026-68379 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix TIME_WAIT socket reference leak on PSP policy failure Release the TIME_WAIT socket reference and jump to discard_it upon PSP policy failure in both IPv4 and IPv6 receive paths. This prevents a memory leak of tcp_tw_bucket structures. | ||||
| CVE-2026-68341 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix use after free in unlock_ovpn() unlock_ovpn() iterates over the release_list using llist_for_each_entry() and drops the peer reference inside the loop body via ovpn_peer_put(). If this drops the last reference, the peer is eventually freed. However, llist_for_each_entry() reads peer->release_entry.next in the loop advance expression, which runs after the body. By that time the peer may have already been freed, resulting in a use after free when advancing to the next list entry. Fix this by using llist_for_each_entry_safe(), which caches the next pointer before executing the loop body. | ||||
| CVE-2026-68316 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix element size accounting for cmd stream validation There are 2 issues with the element size handling in the command stream validation which result in too small of a size calculated when the element size is 16/32/64 bits. For NHWC format, the element size is simply missing from the calculation. The bitfield for the element size is different between IFM/IFM2 and OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM uses bits 1:2. | ||||
| CVE-2026-68314 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregister the notifier and tear down the buses that were added before returning the error. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-68283 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free freeing trigger private data Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing event_trigger_data") moved the kfree() of event_trigger_data to a kthread that runs tracepoint_synchronize_unregister() before freeing. That removed the synchronization the trigger .free callbacks used to get implicitly and inline from trigger_data_free(). event_hist_trigger_free(), event_hist_trigger_named_free() and event_enable_trigger_free() free their satellite data (hist_data, cmd_ops, enable_data) right after trigger_data_free() returns. With the synchronization now deferred to the kthread, a concurrent tracepoint handler can still reach that data through the list_del_rcu()'d trigger, causing a use-after-free. The histogram teardown must stay synchronous: remove_hist_vars() and unregister_field_var_hists() have to detach a synthetic event from the histogram before the trigger-removal write returns, otherwise a following command races in and the synthetic-event removal fails with -EBUSY, as the trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait with the correct barrier - tracepoint_synchronize_unregister(), matching the free kthread - before freeing. The enable trigger has no such synchronous requirement, and a blocking synchronize there would re-serialize the path that commit deliberately deferred. Give it an optional private_data_free() callback that the free kthread runs after its grace period, and free enable_data from there. | ||||
| CVE-2026-68263 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix double call to drm_sched_entity_fini() Call sequence of double call: pvr_context_destroy pvr_context_kill_queues pvr_queue_kill drm_sched_entity_destroy drm_sched_entity_fini // here pvr_context_put kref_put(..., pvr_context_release) pvr_context_destroy_queues pvr_queue_destroy drm_sched_entity_fini // here Call to drm_sched_entity_destroy() from pvr_context_kill_queues() calls drm_sched_entity_flush() + drm_sched_entity_fini(). drm_sched_entity_flush() ensures all pending jobs are completed and drm_sched_entity_fini() ensures no further submission is allowed as per expectation from pvr_context_kill_queues(). Double call to drm_sched_entity_fini() is misuse of the API so keep call only in pvr_context_create() failure path. Stack trace for issue with addition of refcounting for DRM entity stats in commit fd177135f0e6 ("drm/sched: Account entity GPU time"): [ 789.490527] ------------[ cut here ]------------ [ 789.490559] refcount_t: underflow; use-after-free. [ 789.490657] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xf4/0x144, CPU#0: kworker/u16:1/440 [ 789.490695] Modules linked in: powervr drm_gpuvm drm_exec gpu_sched drm_shmem_helper xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils sa2ul sha512 sha256 dwc3_am62 sha1 authenc rti_wdt libsha512 at24 sch_fq_codel fuse dm_mod ipv6 [ 789.490798] CPU: 0 UID: 0 PID: 440 Comm: kworker/u16:1 Not tainted 7.0.0-rc7-02049-g5e2c0700091b #22 PREEMPT [ 789.490809] Hardware name: Texas Instruments AM625 SK (DT) [ 789.490815] Workqueue: powervr-sched pvr_queue_fence_release_work [powervr] [ 789.490868] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 789.490876] pc : refcount_warn_saturate+0xf4/0x144 [ 789.490884] lr : refcount_warn_saturate+0xf4/0x144 [ 789.490892] sp : ffff8000822cbcc0 [ 789.490895] x29: ffff8000822cbcc0 x28: 0000000000000000 x27: 0000000000000000 [ 789.490909] x26: 0000000000000000 x25: ffff800081b1e338 x24: ffff000004541405 [ 789.490922] x23: ffff000004bea950 x22: ffff00000042e400 x21: ffff000007123e30 [ 789.490935] x20: ffff000007123000 x19: ffff000007a80d50 x18: fffffffffffe7768 [ 789.490948] x17: 74736574202c6e6f x16: 697461746e656d65 x15: ffff800081b269f0 [ 789.490962] x14: 0000000000000030 x13: ffff800081b26a70 x12: 0000000000000211 [ 789.490975] x11: 00000000000000c0 x10: 0000000000000b50 x9 : ffff8000822cbb30 [ 789.490988] x8 : ffff0000014e7bb0 x7 : ffff00007725e780 x6 : 0000000372a05f49 [ 789.491001] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000010 [ 789.491013] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000014e7000 [ 789.491027] Call trace: [ 789.491032] refcount_warn_saturate+0xf4/0x144 (P) [ 789.491043] drm_sched_entity_fini+0x164/0x18c [gpu_sched] [ 789.491081] pvr_queue_destroy+0x64/0x134 [powervr] [ 789.491110] pvr_context_destroy_queues+0x34/0x64 [powervr] [ 789.491138] pvr_context_release+0x70/0xac [powervr] [ 789.491166] pvr_context_put.part.0+0x5c/0x7c [powervr] [ 789.491193] pvr_context_put+0x14/0x24 [powervr] [ 789.491221] pvr_queue_fence_release_work+0x20/0x38 [powervr] [ 789.491249] process_one_work+0x160/0x4c4 [ 789.491264] worker_thread+0x188/0x310 [ 789.491276] kthread+0x130/0x13c [ 789.491287] ret_from_fork+0x10/0x20 [ 789.491300] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-68262 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix user array stride in pvr_set_uobj_array() pvr_set_uobj_array() copies an array of kernel objects to a userspace array whose element size is described by out->stride. When out->stride is different from the kernel object size, the slow path advances the userspace pointer by the kernel object size and the kernel pointer by the userspace stride. This reverses the intended layout. For larger userspace strides, later copies read from the wrong kernel addresses. For smaller userspace strides, later copies are written at the wrong userspace offsets. The padding clear is also done only for the first element instead of the padding area for each element. Advance the userspace pointer by out->stride and the kernel pointer by obj_size, and clear per-element padding while the current userspace pointer is still available. | ||||