Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 424637 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26253 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26253 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68250 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: hung_task: fix warnings caused by unaligned lock pointers The blocker tracking mechanism assumes that lock pointers are at least 4-byte aligned to use their lower bits for type encoding. However, as reported by Eero Tamminen, some architectures like m68k only guarantee 2-byte alignment of 32-bit values. This breaks the assumption and causes two related WARN_ON_ONCE checks to trigger. To fix this, the runtime checks are adjusted to silently ignore any lock that is not 4-byte aligned, effectively disabling the feature in such cases and avoiding the related warnings. Thanks to Geert Uytterhoeven for bisecting! | ||||
| CVE-2025-68246 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: close accepted socket when per-IP limit rejects connection When the per-IP connection limit is exceeded in ksmbd_kthread_fn(), the code sets ret = -EAGAIN and continues the accept loop without closing the just-accepted socket. That leaks one socket per rejected attempt from a single IP and enables a trivial remote DoS. Release client_sk before continuing. This bug was found with ZeroPath. | ||||
| CVE-2025-68241 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe The sit driver's packet transmission path calls: sit_tunnel_xmit() -> update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called to delete entries exceeding FNHE_RECLAIM_DEPTH+random. The race window is between fnhe_remove_oldest() selecting fnheX for deletion and the subsequent kfree_rcu(). During this time, the concurrent path's __mkroute_output() -> find_exception() can fetch the soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a new dst using a dst_hold(). When the original fnheX is freed via RCU, the dst reference remains permanently leaked. CPU 0 CPU 1 __mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak] This issue manifests as a device reference count leak and a warning in dmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = N Ido Schimmel provided the simple test validation method [1]. The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes(). Since rt_bind_exception() checks this field, setting it to zero prevents the stale fnhe from being reused and bound to a new dst just before it is freed. [1] ip netns add ns1 ip -n ns1 link set dev lo up ip -n ns1 address add 192.0.2.1/32 dev lo ip -n ns1 link add name dummy1 up type dummy ip -n ns1 route add 192.0.2.2/32 dev dummy1 ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2 ip -n ns1 route add 198.51.0.0/16 dev gretap1 taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & sleep 10 ip netns pids ns1 | xargs kill ip netns del ns1 | ||||
| CVE-2025-68234 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd_net: fix wrong argument types for skb_queue_splice() If timestamp retriving needs to be retried and the local list of SKB's already has entries, then it's spliced back into the socket queue. However, the arguments for the splice helper are transposed, causing exactly the wrong direction of splicing into the on-stack list. Fix that up. | ||||
| CVE-2025-68232 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: more robust handing of race to avoid txq getting stuck Commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") introduced a race condition that can lead to a permanently stalled TXQ. This was observed in production on ARM64 systems (Ampere Altra Max). The race occurs in veth_xmit(). The producer observes a full ptr_ring and stops the queue (netif_tx_stop_queue()). The subsequent conditional logic, intended to re-wake the queue if the consumer had just emptied it (if (__ptr_ring_empty(...)) netif_tx_wake_queue()), can fail. This leads to a "lost wakeup" where the TXQ remains stopped (QUEUE_STATE_DRV_XOFF) and traffic halts. This failure is caused by an incorrect use of the __ptr_ring_empty() API from the producer side. As noted in kernel comments, this check is not guaranteed to be correct if a consumer is operating on another CPU. The empty test is based on ptr_ring->consumer_head, making it reliable only for the consumer. Using this check from the producer side is fundamentally racy. This patch fixes the race by adopting the more robust logic from an earlier version V4 of the patchset, which always flushed the peer: (1) In veth_xmit(), the racy conditional wake-up logic and its memory barrier are removed. Instead, after stopping the queue, we unconditionally call __veth_xdp_flush(rq). This guarantees that the NAPI consumer is scheduled, making it solely responsible for re-waking the TXQ. This handles the race where veth_poll() consumes all packets and completes NAPI *before* veth_xmit() on the producer side has called netif_tx_stop_queue. The __veth_xdp_flush(rq) will observe rx_notify_masked is false and schedule NAPI. (2) On the consumer side, the logic for waking the peer TXQ is moved out of veth_xdp_rcv() and placed at the end of the veth_poll() function. This placement is part of fixing the race, as the netif_tx_queue_stopped() check must occur after rx_notify_masked is potentially set to false during NAPI completion. This handles the race where veth_poll() consumes all packets, but haven't finished (rx_notify_masked is still true). The producer veth_xmit() stops the TXQ and __veth_xdp_flush(rq) will observe rx_notify_masked is true, meaning not starting NAPI. Then veth_poll() change rx_notify_masked to false and stops NAPI. Before exiting veth_poll() will observe TXQ is stopped and wake it up. | ||||
| CVE-2025-68212 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: Fix uninitialized 'offp' in statmount_string() In statmount_string(), most flags assign an output offset pointer (offp) which is later updated with the string offset. However, the STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the struct fields instead of using offp. This leaves offp uninitialized, leading to a possible uninitialized dereference when *offp is updated. Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code path consistent. | ||||
| CVE-2025-68189 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix GEM free for imported dma-bufs Imported dma-bufs also have obj->resv != &obj->_resv. So we should check both this condition in addition to flags for handling the _NO_SHARE case. Fixes this splat that was reported with IRIS video playback: ------------[ cut here ]------------ WARNING: CPU: 3 PID: 2040 at drivers/gpu/drm/msm/msm_gem.c:1127 msm_gem_free_object+0x1f8/0x264 [msm] CPU: 3 UID: 1000 PID: 2040 Comm: .gnome-shell-wr Not tainted 6.17.0-rc7 #1 PREEMPT pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : msm_gem_free_object+0x1f8/0x264 [msm] lr : msm_gem_free_object+0x138/0x264 [msm] sp : ffff800092a1bb30 x29: ffff800092a1bb80 x28: ffff800092a1bce8 x27: ffffbc702dbdbe08 x26: 0000000000000008 x25: 0000000000000009 x24: 00000000000000a6 x23: ffff00083c72f850 x22: ffff00083c72f868 x21: ffff00087e69f200 x20: ffff00087e69f330 x19: ffff00084d157ae0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffbc704bd46b80 x15: 0000ffffd0959540 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: ffffbc702e6cdb48 x10: 0000000000000000 x9 : 000000000000003f x8 : ffff800092a1ba90 x7 : 0000000000000000 x6 : 0000000000000020 x5 : ffffbc704bd46c40 x4 : fffffdffe102cf60 x3 : 0000000000400032 x2 : 0000000000020000 x1 : ffff00087e6978e8 x0 : ffff00087e6977e8 Call trace: msm_gem_free_object+0x1f8/0x264 [msm] (P) drm_gem_object_free+0x1c/0x30 [drm] drm_gem_object_handle_put_unlocked+0x138/0x150 [drm] drm_gem_object_release_handle+0x5c/0xcc [drm] drm_gem_handle_delete+0x68/0xbc [drm] drm_gem_close_ioctl+0x34/0x40 [drm] drm_ioctl_kernel+0xc0/0x130 [drm] drm_ioctl+0x360/0x4e0 [drm] __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xec el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ Patchwork: https://patchwork.freedesktop.org/patch/676273/ | ||||
| CVE-2025-68184 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Disable AFBC support on Mediatek DRM driver Commit c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver") added AFBC support to Mediatek DRM and enabled the 32x8/split/sparse modifier. However, this is currently broken on Mediatek MT8188 (Genio 700 EVK platform); tested using upstream Kernel and Mesa (v25.2.1), AFBC is used by default since Mesa v25.0. Kernel trace reports vblank timeouts constantly, and the render is garbled: ``` [CRTC:62:crtc-0] vblank wait timed out WARNING: CPU: 7 PID: 70 at drivers/gpu/drm/drm_atomic_helper.c:1835 drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c [...] Hardware name: MediaTek Genio-700 EVK (DT) Workqueue: events_unbound commit_work pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c lr : drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c sp : ffff80008337bca0 x29: ffff80008337bcd0 x28: 0000000000000061 x27: 0000000000000000 x26: 0000000000000001 x25: 0000000000000000 x24: ffff0000c9dcc000 x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c66f2f80 x20: ffff0000c0d7d880 x19: 0000000000000000 x18: 000000000000000a x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000 x14: 0000000000000000 x13: 74756f2064656d69 x12: 742074696177206b x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082396a70 x8 : 0000000000057fa8 x7 : 0000000000000cce x6 : ffff8000823eea70 x5 : ffff0001fef5f408 x4 : ffff80017ccee000 x3 : ffff0000c12cb480 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c12cb480 Call trace: drm_atomic_helper_wait_for_vblanks.part.0+0x24c/0x27c (P) drm_atomic_helper_commit_tail_rpm+0x64/0x80 commit_tail+0xa4/0x1a4 commit_work+0x14/0x20 process_one_work+0x150/0x290 worker_thread+0x2d0/0x3ec kthread+0x12c/0x210 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ``` Until this gets fixed upstream, disable AFBC support on this platform, as it's currently broken with upstream Mesa. | ||||
| CVE-2025-68179 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible crashes. The problem is that kernel page tables are modified without flushing corresponding TLB entries. Even if it looks like the empty flush_tlb_all() implementation on s390 is the problem, it is actually a different problem: on s390 it is not allowed to replace an active/valid page table entry with another valid page table entry without the detour over an invalid entry. A direct replacement may lead to random crashes and/or data corruption. In order to invalidate an entry special instructions have to be used (e.g. ipte or idte). Alternatively there are also special instructions available which allow to replace a valid entry with a different valid entry (e.g. crdte or cspg). Given that the HVO code currently does not provide the hooks to allow for an implementation which is compliant with the s390 architecture requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is basically a revert of the original patch which enabled it. | ||||
| CVE-2025-68168 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix uninitialized waitqueue in transaction manager The transaction manager initialization in txInit() was not properly initializing TxBlock[0].waitor waitqueue, causing a crash when txEnd(0) is called on read-only filesystems. When a filesystem is mounted read-only, txBegin() returns tid=0 to indicate no transaction. However, txEnd(0) still gets called and tries to access TxBlock[0].waitor via tid_to_tblock(0), but this waitqueue was never initialized because the initialization loop started at index 1 instead of 0. This causes a 'non-static key' lockdep warning and system crash: INFO: trying to register non-static key in txEnd Fix by ensuring all transaction blocks including TxBlock[0] have their waitqueues properly initialized during txInit(). | ||||
| CVE-2025-68167 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix invalid pointer access in debugfs If the memory allocation in gpiolib_seq_start() fails, the s->private field remains uninitialized and is later dereferenced without checking in gpiolib_seq_stop(). Initialize s->private to NULL before calling kzalloc() and check it before dereferencing it. | ||||
| CVE-2025-40358 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: stacktrace: Disable KASAN checks for non-current tasks Unwinding the stack of a task other than current, KASAN would report "BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460" There is a same issue on x86 and has been resolved by the commit 84936118bdf3 ("x86/unwind: Disable KASAN checks for non-current tasks") The solution could be applied to RISC-V too. This patch also can solve the issue: https://seclists.org/oss-sec/2025/q4/23 [pjw@kernel.org: clean up checkpatch issues] | ||||
| CVE-2025-40356 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix DMA-API usage Use DMA-API dma_map_single() call for getting the DMA address of the transfer buffer instead of hacking with virt_to_phys(). This fixes the following DMA-API debug warning: ------------[ cut here ]------------ DMA-API: rockchip-sfc fe300000.spi: device driver tries to sync DMA memory it has not allocated [device address=0x000000000cf70000] [size=288 bytes] WARNING: kernel/dma/debug.c:1106 at check_sync+0x1d8/0x690, CPU#2: systemd-udevd/151 Modules linked in: ... Hardware name: Hardkernel ODROID-M1 (DT) pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : check_sync+0x1d8/0x690 lr : check_sync+0x1d8/0x690 .. Call trace: check_sync+0x1d8/0x690 (P) debug_dma_sync_single_for_cpu+0x84/0x8c __dma_sync_single_for_cpu+0x88/0x234 rockchip_sfc_exec_mem_op+0x4a0/0x798 [spi_rockchip_sfc] spi_mem_exec_op+0x408/0x498 spi_nor_read_data+0x170/0x184 spi_nor_read_sfdp+0x74/0xe4 spi_nor_parse_sfdp+0x120/0x11f0 spi_nor_sfdp_init_params_deprecated+0x3c/0x8c spi_nor_scan+0x690/0xf88 spi_nor_probe+0xe4/0x304 spi_mem_probe+0x6c/0xa8 spi_probe+0x94/0xd4 really_probe+0xbc/0x298 ... | ||||
| CVE-2025-40354 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: increase max link count and fix link->enc NULL pointer access [why] 1.) dc->links[MAX_LINKS] array size smaller than actual requested. max_connector + max_dpia + 4 virtual = 14. increase from 12 to 14. 2.) hw_init() access null LINK_ENC for dpia non display_endpoint. (cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45) | ||||
| CVE-2025-40350 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ XDP programs can change the layout of an xdp_buff through bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver cannot assume the size of the linear data area nor fragments. Fix the bug in mlx5 by generating skb according to xdp_buff after XDP programs run. Currently, when handling multi-buf XDP, the mlx5 driver assumes the layout of an xdp_buff to be unchanged. That is, the linear data area continues to be empty and fragments remain the same. This may cause the driver to generate erroneous skb or triggering a kernel warning. When an XDP program added linear data through bpf_xdp_adjust_head(), the linear data will be ignored as mlx5e_build_linear_skb() builds an skb without linear data and then pull data from fragments to fill the linear data area. When an XDP program has shrunk the non-linear data through bpf_xdp_adjust_tail(), the delta passed to __pskb_pull_tail() may exceed the actual nonlinear data size and trigger the BUG_ON in it. To fix the issue, first record the original number of fragments. If the number of fragments changes after the XDP program runs, rewind the end fragment pointer by the difference and recalculate the truesize. Then, build the skb with the linear data area matching the xdp_buff. Finally, only pull data in if there is non-linear data and fill the linear part up to 256 bytes. | ||||
| CVE-2025-40349 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfs: validate record offset in hfsplus_bmap_alloc hfsplus_bmap_alloc can trigger a crash if a record offset or length is larger than node_size [ 15.264282] BUG: KASAN: slab-out-of-bounds in hfsplus_bmap_alloc+0x887/0x8b0 [ 15.265192] Read of size 8 at addr ffff8881085ca188 by task test/183 [ 15.265949] [ 15.266163] CPU: 0 UID: 0 PID: 183 Comm: test Not tainted 6.17.0-rc2-gc17b750b3ad9 #14 PREEMPT(voluntary) [ 15.266165] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 15.266167] Call Trace: [ 15.266168] <TASK> [ 15.266169] dump_stack_lvl+0x53/0x70 [ 15.266173] print_report+0xd0/0x660 [ 15.266181] kasan_report+0xce/0x100 [ 15.266185] hfsplus_bmap_alloc+0x887/0x8b0 [ 15.266208] hfs_btree_inc_height.isra.0+0xd5/0x7c0 [ 15.266217] hfsplus_brec_insert+0x870/0xb00 [ 15.266222] __hfsplus_ext_write_extent+0x428/0x570 [ 15.266225] __hfsplus_ext_cache_extent+0x5e/0x910 [ 15.266227] hfsplus_ext_read_extent+0x1b2/0x200 [ 15.266233] hfsplus_file_extend+0x5a7/0x1000 [ 15.266237] hfsplus_get_block+0x12b/0x8c0 [ 15.266238] __block_write_begin_int+0x36b/0x12c0 [ 15.266251] block_write_begin+0x77/0x110 [ 15.266252] cont_write_begin+0x428/0x720 [ 15.266259] hfsplus_write_begin+0x51/0x100 [ 15.266262] cont_write_begin+0x272/0x720 [ 15.266270] hfsplus_write_begin+0x51/0x100 [ 15.266274] generic_perform_write+0x321/0x750 [ 15.266285] generic_file_write_iter+0xc3/0x310 [ 15.266289] __kernel_write_iter+0x2fd/0x800 [ 15.266296] dump_user_range+0x2ea/0x910 [ 15.266301] elf_core_dump+0x2a94/0x2ed0 [ 15.266320] vfs_coredump+0x1d85/0x45e0 [ 15.266349] get_signal+0x12e3/0x1990 [ 15.266357] arch_do_signal_or_restart+0x89/0x580 [ 15.266362] irqentry_exit_to_user_mode+0xab/0x110 [ 15.266364] asm_exc_page_fault+0x26/0x30 [ 15.266366] RIP: 0033:0x41bd35 [ 15.266367] Code: bc d1 f3 0f 7f 27 f3 0f 7f 6f 10 f3 0f 7f 77 20 f3 0f 7f 7f 30 49 83 c0 0f 49 29 d0 48 8d 7c 17 31 e9 9f 0b 00 00 66 0f ef c0 <f3> 0f 6f 0e f3 0f 6f 56 10 66 0f 74 c1 66 0f d7 d0 49 83 f8f [ 15.266369] RSP: 002b:00007ffc9e62d078 EFLAGS: 00010283 [ 15.266371] RAX: 00007ffc9e62d100 RBX: 0000000000000000 RCX: 0000000000000000 [ 15.266372] RDX: 00000000000000e0 RSI: 0000000000000000 RDI: 00007ffc9e62d100 [ 15.266373] RBP: 0000400000000040 R08: 00000000000000e0 R09: 0000000000000000 [ 15.266374] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 15.266375] R13: 0000000000000000 R14: 0000000000000000 R15: 0000400000000000 [ 15.266376] </TASK> When calling hfsplus_bmap_alloc to allocate a free node, this function first retrieves the bitmap from header node and map node using node->page together with the offset and length from hfs_brec_lenoff ``` len = hfs_brec_lenoff(node, 2, &off16); off = off16; off += node->page_offset; pagep = node->page + (off >> PAGE_SHIFT); data = kmap_local_page(*pagep); ``` However, if the retrieved offset or length is invalid(i.e. exceeds node_size), the code may end up accessing pages outside the allocated range for this node. This patch adds proper validation of both offset and length before use, preventing out-of-bounds page access. Move is_bnode_offset_valid and check_and_correct_requested_length to hfsplus_fs.h, as they may be required by other functions. | ||||
| CVE-2025-40347 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix the deadlock of enetc_mdio_lock After applying the workaround for err050089, the LS1028A platform experiences RCU stalls on RT kernel. This issue is caused by the recursive acquisition of the read lock enetc_mdio_lock. Here list some of the call stacks identified under the enetc_poll path that may lead to a deadlock: enetc_poll -> enetc_lock_mdio -> enetc_clean_rx_ring OR napi_complete_done -> napi_gro_receive -> enetc_start_xmit -> enetc_lock_mdio -> enetc_map_tx_buffs -> enetc_unlock_mdio -> enetc_unlock_mdio After enetc_poll acquires the read lock, a higher-priority writer attempts to acquire the lock, causing preemption. The writer detects that a read lock is already held and is scheduled out. However, readers under enetc_poll cannot acquire the read lock again because a writer is already waiting, leading to a thread hang. Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent recursive lock acquisition. | ||||
| CVE-2025-40342 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: use lock accessing port_state and rport state nvme_fc_unregister_remote removes the remote port on a lport object at any point in time when there is no active association. This races with with the reconnect logic, because nvme_fc_create_association is not taking a lock to check the port_state and atomically increase the active count on the rport. | ||||
| CVE-2025-40334 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq buffer virtual address and size It needs to validate the userq object virtual address to determine whether it is residented in a valid vm mapping. | ||||
| CVE-2025-40331 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: Prevent TOCTOU out-of-bounds write For the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump() make sure not to exceed bounds in case the address list has grown between buffer allocation (time-of-check) and write (time-of-use). | ||||