Export limit exceeded: 395546 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 24445 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24445 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amba: bus: fix refcount leak commit 5de1540b7bc4 ("drivers/amba: create devices from device tree") increases the refcount of of_node, but not releases it in amba_device_release, so there is refcount leak. By using of_node_put to avoid refcount leak. | ||||
| CVE-2025-68288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: Fix memory leak in USB bulk transport A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. | ||||
| CVE-2023-54228 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: raa215300: Fix resource leak in case of error The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and this memory is not freed in the error path. Similarly, resources allocated by clk_register_fixed_rate() are not freed in the error path. Fix these issues by using devm_clk_hw_register_fixed_rate() and devm_clk_hw_register_clkdev(). After this, the static variable clk is not needed. Replace it with local variable hw in probe() and drop calling clk_unregister_fixed_rate() from raa215300_rtc_unregister_device(). | ||||
| CVE-2022-50810 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: devices: fix missing put_device in mport_cdev_open When kfifo_alloc fails, the refcount of chdev->dev is left incremental. We should use put_device(&chdev->dev) to decrease the ref count of chdev->dev to avoid refcount leak. | ||||
| CVE-2023-54195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix timeout of a call that hasn't yet been granted a channel afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may get stalled in the background waiting for a connection to become available); it then calls rxrpc_kernel_set_max_life() to set the timeouts - but that starts the call timer so the call timer might then expire before we get a connection assigned - leading to the following oops if the call stalled: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701 RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157 ... Call Trace: <TASK> rxrpc_send_ACK+0x50/0x13b rxrpc_input_call_event+0x16a/0x67d rxrpc_io_thread+0x1b6/0x45f ? _raw_spin_unlock_irqrestore+0x1f/0x35 ? rxrpc_input_packet+0x519/0x519 kthread+0xe7/0xef ? kthread_complete_and_exit+0x1b/0x1b ret_from_fork+0x22/0x30 Fix this by noting the timeouts in struct rxrpc_call when the call is created. The timer will be started when the first packet is transmitted. It shouldn't be possible to trigger this directly from userspace through AF_RXRPC as sendmsg() will return EBUSY if the call is in the waiting-for-conn state if it dropped out of the wait due to a signal. | ||||
| CVE-2023-54190 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: led-core: Fix refcount leak in of_led_get() class_find_device_by_of_node() calls class_find_device(), it will take the reference, use the put_device() to drop the reference when not need anymore. | ||||
| CVE-2023-54183 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link() If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos. | ||||
| CVE-2025-40209 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak of qgroup_list in btrfs_add_qgroup_relation When btrfs_add_qgroup_relation() is called with invalid qgroup levels (src >= dst), the function returns -EINVAL directly without freeing the preallocated qgroup_list structure passed by the caller. This causes a memory leak because the caller unconditionally sets the pointer to NULL after the call, preventing any cleanup. The issue occurs because the level validation check happens before the mutex is acquired and before any error handling path that would free the prealloc pointer. On this early return, the cleanup code at the 'out' label (which includes kfree(prealloc)) is never reached. In btrfs_ioctl_qgroup_assign(), the code pattern is: prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL); ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc); prealloc = NULL; // Always set to NULL regardless of return value ... kfree(prealloc); // This becomes kfree(NULL), does nothing When the level check fails, 'prealloc' is never freed by either the callee or the caller, resulting in a 64-byte memory leak per failed operation. This can be triggered repeatedly by an unprivileged user with access to a writable btrfs mount, potentially exhausting kernel memory. Fix this by freeing prealloc before the early return, ensuring prealloc is always freed on all error paths. | ||||
| CVE-2025-68752 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. The fix is similar to commit 329d050bbe63 ("gve: Implement settime64 with -EOPNOTSUPP"). | ||||
| CVE-2022-50852 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix use after free in mt7921_acpi_read() Don't dereference "sar_root" after it has been freed. | ||||
| CVE-2022-50845 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode leak in ext4_xattr_inode_create() on an error path There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. | ||||
| CVE-2022-50839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential buffer head reference count leak As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50826 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection() Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose() with a subdev state of NULL leads to a NULL pointer dereference. This can currently happen in imgu_subdev_set_selection() when the state passed in is NULL, as this method first gets pointers to both the "try" and "active" states and only then decides which to use. The same issue has been addressed for imgu_subdev_get_selection() with commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active selection access"). However the issue still persists in imgu_subdev_set_selection(). Therefore, apply a similar fix as done in the aforementioned commit to imgu_subdev_set_selection(). To keep things a bit cleaner, introduce helper functions for "crop" and "compose" access and use them in both imgu_subdev_set_selection() and imgu_subdev_get_selection(). | ||||
| CVE-2022-50821 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails | ||||
| CVE-2022-50814 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr KASAN reported this Bug: [17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60 [17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958 ... [17619.698934] The buggy address belongs to the variable: [17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip] There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr. The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by param_get/set_int. Replacing param_get/set_int to param_get/set_ushort can fix this bug. | ||||
| CVE-2025-71064 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialized. | ||||
| CVE-2025-68348 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in __blkdev_issue_zero_pages Move the fatal signal check before bio_alloc() to prevent a memory leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending. Previously, the bio was allocated before checking for a fatal signal. If a signal was pending, the code would break out of the loop without freeing or chaining the just-allocated bio, causing a memory leak. This matches the pattern already used in __blkdev_issue_write_zeroes() where the signal check precedes the allocation. | ||||
| CVE-2025-68199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext When alloc_slab_obj_exts() fails and then later succeeds in allocating a slab extension vector, it calls handle_failed_objexts_alloc() to mark all objects in the vector as empty. As a result all objects in this slab (slabA) will have their extensions set to CODETAG_EMPTY. Later on if this slabA is used to allocate a slabobj_ext vector for another slab (slabB), we end up with the slabB->obj_exts pointing to a slabobj_ext vector that itself has a non-NULL slabobj_ext equal to CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to free slabB->obj_exts vector. free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will generate a warning because it expects slabobj_ext vectors to have a NULL obj_ext, not CODETAG_EMPTY. Modify mark_objexts_empty() to skip the warning and setting the obj_ext value if it's already set to CODETAG_EMPTY. To quickly detect this WARN, I modified the code from WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1); We then obtained this message: [21630.898561] ------------[ cut here ]------------ [21630.898596] kernel BUG at mm/slub.c:2050! [21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1 vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi net_failover virtio_console failover virtio_mmio dm_mirror dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4 aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject] [21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump: loaded Tainted: G W 6.18.0-rc1+ #74 PREEMPT(voluntary) [21630.910495] Tainted: [W]=WARN [21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 [21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [21630.912392] pc : __free_slab+0x228/0x250 [21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp : ffff8000a02f73e0 [21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27: ffff0000c0011c40 [21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24: ffff000102199b40 [21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21: ffff0000c0011c40 [21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18: 0000000000000000 [21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12: ffff70001405ee66 [21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 : ffff800080a295dc [21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 : 0000000000003000 [21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 : 0000000000000007 [21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 : 0000000000000001 [21630.921810] Call trace: [21630.922130] __free_slab+0x228/0x250 (P) [21630.922669] free_slab+0x38/0x118 [21630.923079] free_to_partial_list+0x1d4/0x340 [21630.923591] __slab_free+0x24c/0x348 [21630.924024] ___cache_free+0xf0/0x110 [21630.924468] qlist_free_all+0x78/0x130 [21630.924922] kasan_quarantine_reduce+0x11 ---truncated--- | ||||
| CVE-2025-71198 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL event_spec field, indicating support for IIO events. However, event detection is not supported for all sensors, and if userspace tries to configure accelerometer wakeup events on a sensor device that does not support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL pointer when trying to write to the wakeup register. Define an additional struct iio_chan_spec array whose members have a NULL event_spec field, and use this array instead of st_lsm6dsx_acc_channels for sensors without event detection capability. | ||||