Export limit exceeded: 24445 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24445 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68243 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Check the TLS certificate fields in nfs_match_client() If the TLS security policy is of type RPC_XPRTSEC_TLS_X509, then the cert_serial and privkey_serial fields need to match as well since they define the client's identity, as presented to the server. | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2025-68377 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ns: initialize ns_list_node for initial namespaces Make sure that the list is always initialized for initial namespaces. | ||||
| CVE-2025-40230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: prevent poison consumption when splitting THP When performing memory error injection on a THP (Transparent Huge Page) mapped to userspace on an x86 server, the kernel panics with the following trace. The expected behavior is to terminate the affected process instead of panicking the kernel, as the x86 Machine Check code can recover from an in-userspace #MC. mce: [Hardware Error]: CPU 0: Machine Check Exception: f Bank 3: bd80000000070134 mce: [Hardware Error]: RIP 10:<ffffffff8372f8bc> {memchr_inv+0x4c/0xf0} mce: [Hardware Error]: TSC afff7bbff88a ADDR 1d301b000 MISC 80 PPIN 1e741e77539027db mce: [Hardware Error]: PROCESSOR 0:d06d0 TIME 1758093249 SOCKET 0 APIC 0 microcode 80000320 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The root cause of this panic is that handling a memory failure triggered by an in-userspace #MC necessitates splitting the THP. The splitting process employs a mechanism, implemented in try_to_map_unused_to_zeropage(), which reads the pages in the THP to identify zero-filled pages. However, reading the pages in the THP results in a second in-kernel #MC, occurring before the initial memory_failure() completes, ultimately leading to a kernel panic. See the kernel panic call trace on the two #MCs. First Machine Check occurs // [1] memory_failure() // [2] try_to_split_thp_page() split_huge_page() split_huge_page_to_list_to_order() __folio_split() // [3] remap_page() remove_migration_ptes() remove_migration_pte() try_to_map_unused_to_zeropage() // [4] memchr_inv() // [5] Second Machine Check occurs // [6] Kernel panic [1] Triggered by accessing a hardware-poisoned THP in userspace, which is typically recoverable by terminating the affected process. [2] Call folio_set_has_hwpoisoned() before try_to_split_thp_page(). [3] Pass the RMP_USE_SHARED_ZEROPAGE remap flag to remap_page(). [4] Try to map the unused THP to zeropage. [5] Re-access pages in the hw-poisoned THP in the kernel. [6] Triggered in-kernel, leading to a panic kernel. In Step[2], memory_failure() sets the poisoned flag on the page in the THP by TestSetPageHWPoison() before calling try_to_split_thp_page(). As suggested by David Hildenbrand, fix this panic by not accessing to the poisoned page in the THP during zeropage identification, while continuing to scan unaffected pages in the THP for possible zeropage mapping. This prevents a second in-kernel #MC that would cause kernel panic in Step[4]. Thanks to Andrew Zaborowski for his initial work on fixing this issue. | ||||
| CVE-2025-40335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq input args This will help on validating the userq input args, and rejecting for the invalid userq request at the IOCTLs first place. | ||||
| CVE-2025-40106 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands. | ||||
| CVE-2025-40229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme Currently, damon_destroy_scheme() only cleans up the filter list but leaves ops_filter untouched, which could lead to memory leaks when a scheme is destroyed. This patch ensures both filter and ops_filter are properly freed in damon_destroy_scheme(), preventing potential memory leaks. | ||||
| CVE-2025-40137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate first page in error path of f2fs_truncate() syzbot reports a bug as below: loop0: detected capacity change from 0 to 40427 F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072) F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock F2FS-fs (loop0): invalid crc value F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix. ------------[ cut here ]------------ kernel BUG at fs/inode.c:753! RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753 Call Trace: <TASK> evict+0x504/0x9c0 fs/inode.c:810 f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047 get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692 vfs_get_tree+0x8f/0x2b0 fs/super.c:1815 do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x317/0x410 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f During f2fs_evict_inode(), clear_inode() detects that we missed to truncate all page cache before destorying inode, that is because in below path, we will create page #0 in cache, but missed to drop it in error path, let's fix it. - evict - f2fs_evict_inode - f2fs_truncate - f2fs_convert_inline_inode - f2fs_grab_cache_folio : create page #0 in cache - f2fs_convert_inline_folio : sanity check failed, return -EFSCORRUPTED - clear_inode detects that inode->i_data.nrpages is not zero | ||||
| CVE-2025-40107 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled This issue is similar to the vulnerability in the `mcp251x` driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up"). In the `hi311x` driver, when the device resumes from sleep, the driver schedules `priv->restart_work`. However, if the network interface was not previously enabled, the `priv->wq` (workqueue) is not allocated and initialized, leading to a null pointer dereference. To fix this, we move the allocation and initialization of the workqueue from the `hi3110_open` function to the `hi3110_can_probe` function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of `hi3110_can_probe` and in the `hi3110_can_remove` function to prevent resource leaks. | ||||
| CVE-2025-40108 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: Fix blocked task Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for serial driver") and its dependent commit 86fa39dd6fb7 ("serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the first one causes regression - hang task on Qualcomm RB1 board (QRB2210) and unable to use serial at all during normal boot: INFO: task kworker/u16:0:12 blocked for more than 42 seconds. Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 Workqueue: async async_run_entry_fn Call trace: __switch_to+0xe8/0x1a0 (T) __schedule+0x290/0x7c0 schedule+0x34/0x118 rpm_resume+0x14c/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c rpm_resume+0x2a4/0x66c __pm_runtime_resume+0x50/0x9c __driver_probe_device+0x58/0x120 driver_probe_device+0x3c/0x154 __driver_attach_async_helper+0x4c/0xc0 async_run_entry_fn+0x34/0xe0 process_one_work+0x148/0x290 worker_thread+0x2c4/0x3e0 kthread+0x118/0x1c0 ret_from_fork+0x10/0x20 The issue was reported on 12th of August and was ignored by author of commits introducing issue for two weeks. Only after complaining author produced a fix which did not work, so if original commits cannot be reliably fixed for 5 weeks, they obviously are buggy and need to be dropped. | ||||
| CVE-2025-24325 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 8.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2023-53755 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ptdma: check for null desc before calling pt_cmd_callback Resolves a panic that can occur on AMD systems, typically during host shutdown, after the PTDMA driver had been exercised. The issue was the pt_issue_pending() function is mistakenly assuming that there will be at least one descriptor in the Submitted queue when the function is called. However, it is possible that both the Submitted and Issued queues could be empty, which could result in pt_cmd_callback() being mistakenly called with a NULL pointer. Ref: Bugzilla Bug 216856. | ||||
| CVE-2023-54324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix a race condition in retrieve_deps There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. | ||||
| CVE-2025-68310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump Do not block PCI config accesses through pci_cfg_access_lock() when executing the s390 variant of PCI error recovery: Acquire just device_lock() instead of pci_dev_lock() as powerpc's EEH and generig PCI AER processing do. During error recovery testing a pair of tasks was reported to be hung: mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working INFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000 Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0 INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000 Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core] No kernel log of the exact same error with an upstream kernel is available - but the very same deadlock situation can be constructed there, too: - task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock() - task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock. A similar deadlock situation can be reproduced by requesting a crdump with > devlink health dump show pci/<BDF> reporter fw_fatal while PCI error recovery is executed on the same <BDF> physical function by mlx5_core's pci_error_handlers. On s390 this can be injected with > zpcictl --reset-fw <BDF> Tests with this patch failed to reproduce that second deadlock situation, the devlink command is rejected with "kernel answers: Permission denied" - and we get a kernel log message of: mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5 because the config read of VSC_SEMAPHORE is rejected by the underlying hardware. Two prior attempts to address this issue have been discussed and ultimately rejected [see link], with the primary argument that s390's implementation of PCI error recovery is imposing restrictions that neither powerpc's EEH nor PCI AER handling need. Tests show that PCI error recovery on s390 is running to completion even without blocking access to PCI config space. | ||||
| CVE-2025-40247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix pgtable prealloc error path The following splat was reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008d0fd8000 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 5 UID: 1000 PID: 149076 Comm: Xwayland Tainted: G S 6.16.0-rc2-00809-g0b6974bb4134-dirty #367 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. SM8650 HDK (DT) pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : build_detached_freelist+0x28/0x224 lr : kmem_cache_free_bulk.part.0+0x38/0x244 sp : ffff000a508c7a20 x29: ffff000a508c7a20 x28: ffff000a508c7d50 x27: ffffc4e49d16f350 x26: 0000000000000058 x25: 00000000fffffffc x24: 0000000000000000 x23: ffff00098c4e1450 x22: 00000000fffffffc x21: 0000000000000000 x20: ffff000a508c7af8 x19: 0000000000000002 x18: 00000000000003e8 x17: ffff000809523850 x16: ffff000809523820 x15: 0000000000401640 x14: ffff000809371140 x13: 0000000000000130 x12: ffff0008b5711e30 x11: 00000000001058fa x10: 0000000000000a80 x9 : ffff000a508c7940 x8 : ffff000809371ba0 x7 : 781fffe033087fff x6 : 0000000000000000 x5 : ffff0008003cd000 x4 : 781fffe033083fff x3 : ffff000a508c7af8 x2 : fffffdffc0000000 x1 : 0001000000000000 x0 : ffff0008001a6a00 Call trace: build_detached_freelist+0x28/0x224 (P) kmem_cache_free_bulk.part.0+0x38/0x244 kmem_cache_free_bulk+0x10/0x1c msm_iommu_pagetable_prealloc_cleanup+0x3c/0xd0 msm_vma_job_free+0x30/0x240 msm_ioctl_vm_bind+0x1d0/0x9a0 drm_ioctl_kernel+0x84/0x104 drm_ioctl+0x358/0x4d4 __arm64_sys_ioctl+0x8c/0xe0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x3c/0xe0 do_el0_svc+0x18/0x20 el0_svc+0x30/0x100 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x170/0x174 Code: aa0203f5 b26287e2 f2dfbfe2 aa0303f4 (f8737ab6) ---[ end trace 0000000000000000 ]--- Since msm_vma_job_free() is called directly from the ioctl, this looks like an error path cleanup issue. Which I think results from prealloc_cleanup() called without a preceding successful prealloc_allocate() call. So handle that case better. Patchwork: https://patchwork.freedesktop.org/patch/678677/ | ||||
| CVE-2023-54282 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: tuners: qt1010: replace BUG_ON with a regular error BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2025-40210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND" I've found that pynfs COMP6 now leaves the connection or lease in a strange state, which causes CLOSE9 to hang indefinitely. I've dug into it a little, but I haven't been able to root-cause it yet. However, I bisected to commit 48aab1606fa8 ("NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"). Tianshuo Han also reports a potential vulnerability when decoding an NFSv4 COMPOUND. An attacker can place an arbitrarily large op count in the COMPOUND header, which results in: [ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 when NFSD attempts to allocate the COMPOUND op array. Let's restore the operation-per-COMPOUND limit, but increased to 200 for now. | ||||
| CVE-2023-54213 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. | ||||