Export limit exceeded: 24444 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24444 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68346 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: dice: fix buffer overflow in detect_stream_formats() The function detect_stream_formats() reads the stream_count value directly from a FireWire device without validating it. This can lead to out-of-bounds writes when a malicious device provides a stream_count value greater than MAX_STREAMS. Fix by applying the same validation to both TX and RX stream counts in detect_stream_formats(). | ||||
| CVE-2025-68323 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: fix use-after-free caused by uec->work The delayed work uec->work is scheduled in gaokun_ucsi_probe() but never properly canceled in gaokun_ucsi_remove(). This creates use-after-free scenarios where the ucsi and gaokun_ucsi structure are freed after ucsi_destroy() completes execution, while the gaokun_ucsi_register_worker() might be either currently executing or still pending in the work queue. The already-freed gaokun_ucsi or ucsi structure may then be accessed. Furthermore, the race window is 3 seconds, which is sufficiently long to make this bug easily reproducible. The following is the trace captured by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in __run_timers+0x5ec/0x630 Write of size 8 at addr ffff00000ec28cc8 by task swapper/0/0 ... Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x114/0x580 kasan_report+0xa4/0xf0 __asan_report_store8_noabort+0x20/0x2c __run_timers+0x5ec/0x630 run_timer_softirq+0xe8/0x1cc handle_softirqs+0x294/0x720 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x1c call_on_irq_stack+0x30/0x48 do_softirq_own_stack+0x1c/0x28 __irq_exit_rcu+0x27c/0x364 irq_exit_rcu+0x10/0x1c el1_interrupt+0x40/0x60 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 arch_local_irq_enable+0x4/0x8 (P) do_idle+0x334/0x458 cpu_startup_entry+0x60/0x70 rest_init+0x158/0x174 start_kernel+0x2f8/0x394 __primary_switched+0x8c/0x94 Allocated by task 72 on cpu 0 at 27.510341s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c kasan_save_alloc_info+0x40/0x54 __kasan_kmalloc+0xa0/0xb8 __kmalloc_node_track_caller_noprof+0x1c0/0x588 devm_kmalloc+0x7c/0x1c8 gaokun_ucsi_probe+0xa0/0x840 auxiliary_bus_probe+0x94/0xf8 really_probe+0x17c/0x5b8 __driver_probe_device+0x158/0x2c4 driver_probe_device+0x10c/0x264 __device_attach_driver+0x168/0x2d0 bus_for_each_drv+0x100/0x188 __device_attach+0x174/0x368 device_initial_probe+0x14/0x20 bus_probe_device+0x120/0x150 device_add+0xb3c/0x10fc __auxiliary_device_add+0x88/0x130 ... Freed by task 73 on cpu 1 at 28.910627s: kasan_save_stack+0x2c/0x54 kasan_save_track+0x24/0x5c __kasan_save_free_info+0x4c/0x74 __kasan_slab_free+0x60/0x8c kfree+0xd4/0x410 devres_release_all+0x140/0x1f0 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x344/0x460 device_release_driver+0x18/0x24 bus_remove_device+0x198/0x274 device_del+0x310/0xa84 ... The buggy address belongs to the object at ffff00000ec28c00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 200 bytes inside of freed 512-byte region The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ec28 head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000040 ffff000008801c80 dead000000000122 0000000000000000 head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000 head: 03fffe0000000002 fffffdffc03b0a01 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff00000ec28b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff00000ec28c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff00000ec28c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff00000ec28d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff00000ec28d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================ ---truncated--- | ||||
| CVE-2025-68344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: wavefront: Fix integer overflow in sample size validation The wavefront_send_sample() function has an integer overflow issue when validating sample size. The header->size field is u32 but gets cast to int for comparison with dev->freemem Fix by using unsigned comparison to avoid integer overflow. | ||||
| CVE-2025-68309 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Fix NULL pointer access by aer_info The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx will result in kernel panic. Fix it. | ||||
| CVE-2025-68306 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface When performing reset tests and encountering abnormal card drop issues that lead to a kernel crash, it is necessary to perform a null check before releasing resources to avoid attempting to release a null pointer. <4>[ 29.158070] Hardware name: Google Quigon sku196612/196613 board (DT) <4>[ 29.158076] Workqueue: hci0 hci_cmd_sync_work [bluetooth] <4>[ 29.158154] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>[ 29.158162] pc : klist_remove+0x90/0x158 <4>[ 29.158174] lr : klist_remove+0x88/0x158 <4>[ 29.158180] sp : ffffffc0846b3c00 <4>[ 29.158185] pmr_save: 000000e0 <4>[ 29.158188] x29: ffffffc0846b3c30 x28: ffffff80cd31f880 x27: ffffff80c1bdc058 <4>[ 29.158199] x26: dead000000000100 x25: ffffffdbdc624ea3 x24: ffffff80c1bdc4c0 <4>[ 29.158209] x23: ffffffdbdc62a3e6 x22: ffffff80c6c07000 x21: ffffffdbdc829290 <4>[ 29.158219] x20: 0000000000000000 x19: ffffff80cd3e0648 x18: 000000031ec97781 <4>[ 29.158229] x17: ffffff80c1bdc4a8 x16: ffffffdc10576548 x15: ffffff80c1180428 <4>[ 29.158238] x14: 0000000000000000 x13: 000000000000e380 x12: 0000000000000018 <4>[ 29.158248] x11: ffffff80c2a7fd10 x10: 0000000000000000 x9 : 0000000100000000 <4>[ 29.158257] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 2d7223ff6364626d <4>[ 29.158266] x5 : 0000008000000000 x4 : 0000000000000020 x3 : 2e7325006465636e <4>[ 29.158275] x2 : ffffffdc11afeff8 x1 : 0000000000000000 x0 : ffffffdc11be4d0c <4>[ 29.158285] Call trace: <4>[ 29.158290] klist_remove+0x90/0x158 <4>[ 29.158298] device_release_driver_internal+0x20c/0x268 <4>[ 29.158308] device_release_driver+0x1c/0x30 <4>[ 29.158316] usb_driver_release_interface+0x70/0x88 <4>[ 29.158325] btusb_mtk_release_iso_intf+0x68/0xd8 [btusb (HASH:e8b6 5)] <4>[ 29.158347] btusb_mtk_reset+0x5c/0x480 [btusb (HASH:e8b6 5)] <4>[ 29.158361] hci_cmd_sync_work+0x10c/0x188 [bluetooth (HASH:a4fa 6)] <4>[ 29.158430] process_scheduled_works+0x258/0x4e8 <4>[ 29.158441] worker_thread+0x300/0x428 <4>[ 29.158448] kthread+0x108/0x1d0 <4>[ 29.158455] ret_from_fork+0x10/0x20 <0>[ 29.158467] Code: 91343000 940139d1 f9400268 927ff914 (f9401297) <4>[ 29.158474] ---[ end trace 0000000000000000 ]--- <0>[ 29.167129] Kernel panic - not syncing: Oops: Fatal exception <2>[ 29.167144] SMP: stopping secondary CPUs <4>[ 29.167158] ------------[ cut here ]------------ | ||||
| CVE-2025-68297 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash in process_v2_sparse_read() for encrypted directories The crash in process_v2_sparse_read() for fscrypt-encrypted directories has been reported. Issue takes place for Ceph msgr2 protocol in secure mode. It can be reproduced by the steps: sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure (1) mkdir /mnt/cephfs/fscrypt-test-3 (2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3 (3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3 (4) fscrypt lock /mnt/cephfs/fscrypt-test-3 (5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3 (6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar (7) Issue has been triggered [ 408.072247] ------------[ cut here ]------------ [ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865 ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+ [ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014 [ 408.072310] Workqueue: ceph-msgr ceph_con_workfn [ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8 8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06 fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85 [ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246 [ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38 [ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8 [ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8 [ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000 [ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000) knlGS:0000000000000000 [ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0 [ 408.072336] PKRU: 55555554 [ 408.072337] Call Trace: [ 408.072338] <TASK> [ 408.072340] ? sched_clock_noinstr+0x9/0x10 [ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [ 408.072347] ? _raw_spin_unlock+0xe/0x40 [ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830 [ 408.072353] ? __kasan_check_write+0x14/0x30 [ 408.072357] ? mutex_lock+0x84/0xe0 [ 408.072359] ? __pfx_mutex_lock+0x10/0x10 [ 408.072361] ceph_con_workfn+0x27e/0x10e0 [ 408.072364] ? metric_delayed_work+0x311/0x2c50 [ 408.072367] process_one_work+0x611/0xe20 [ 408.072371] ? __kasan_check_write+0x14/0x30 [ 408.072373] worker_thread+0x7e3/0x1580 [ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 408.072378] ? __pfx_worker_thread+0x10/0x10 [ 408.072381] kthread+0x381/0x7a0 [ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 408.072385] ? __pfx_kthread+0x10/0x10 [ 408.072387] ? __kasan_check_write+0x14/0x30 [ 408.072389] ? recalc_sigpending+0x160/0x220 [ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50 [ 408.072394] ? calculate_sigpending+0x78/0xb0 [ 408.072395] ? __pfx_kthread+0x10/0x10 [ 408.072397] ret_from_fork+0x2b6/0x380 [ 408.072400] ? __pfx_kthread+0x10/0x10 [ 408.072402] ret_from_fork_asm+0x1a/0x30 [ 408.072406] </TASK> [ 408.072407] ---[ end trace 0000000000000000 ]--- [ 408.072418] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000 ---truncated--- | ||||
| CVE-2025-68253 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: don't spin in add_stack_record when gfp flags don't allow syzbot was able to find the following path: add_stack_record_to_list mm/page_owner.c:182 [inline] inc_stack_record_count mm/page_owner.c:214 [inline] __set_page_owner+0x2c3/0x4a0 mm/page_owner.c:333 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 alloc_pages_nolock_noprof+0x94/0x120 mm/page_alloc.c:7554 Don't spin in add_stack_record_to_list() when it is called from *_nolock() context. | ||||
| CVE-2025-68252 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to the dma_buf for comparison purposes. However, this reference is never released when the function returns, leading to a dma_buf memory leak. Fix this by adding dma_buf_put before returning from the function, ensuring that the temporarily acquired reference is properly released regardless of whether a matching map is found. Rule: add | ||||
| CVE-2025-68242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix LTP test failures when timestamps are delegated The utimes01 and utime06 tests fail when delegated timestamps are enabled, specifically in subtests that modify the atime and mtime fields using the 'nobody' user ID. The problem can be reproduced as follow: # echo "/media *(rw,no_root_squash,sync)" >> /etc/exports # export -ra # mount -o rw,nfsvers=4.2 127.0.0.1:/media /tmpdir # cd /opt/ltp # ./runltp -d /tmpdir -s utimes01 # ./runltp -d /tmpdir -s utime06 This issue occurs because nfs_setattr does not verify the inode's UID against the caller's fsuid when delegated timestamps are permitted for the inode. This patch adds the UID check and if it does not match then the request is sent to the server for permission checking. | ||||
| CVE-2025-40184 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix debug checking for np-guests using huge mappings When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then the debug checking in assert_host_shared_guest() fails on the launch of an np-guest. This WARN_ON() causes a panic and generates the stack below. In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping is a single page but it may be a block map. Update the checking so that the size is not checked and just assumes the correct size. While we're here make the same fix in __pkvm_host_mkyoung_guest(). Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128 Info: Removed ghost socket file "/.lkvm//guest-128.sock". [ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088! [ 1406.521804] kvm [141]: nVHE call trace: [ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8 [ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c [ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104 [ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c [ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8 [ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 [ 1406.522454] kvm [141]: ---[ end nVHE call trace ]--- [ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000 [ 1406.522554] Kernel panic - not syncing: HYP panic: [ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.522554] VCPU:0000000000000000 [ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT [ 1406.523485] Hardware name: FVP Base RevC (DT) [ 1406.523566] Call trace: [ 1406.523629] show_stack+0x18/0x24 (C) [ 1406.523753] dump_stack_lvl+0xd4/0x108 [ 1406.523899] dump_stack+0x18/0x24 [ 1406.524040] panic+0x3d8/0x448 [ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c [ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c [ 1406.524500] handle_exit+0x60/0x17c [ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0 [ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc [ 1406.524919] __arm64_sys_ioctl+0xac/0x104 [ 1406.525067] invoke_syscall+0x48/0x10c [ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0 [ 1406.525322] do_el0_svc+0x1c/0x28 [ 1406.525441] el0_svc+0x38/0x120 [ 1406.525588] el0t_64_sync_handler+0x10c/0x138 [ 1406.525750] el0t_64_sync+0x1ac/0x1b0 [ 1406.525876] SMP: stopping secondary CPUs [ 1406.525965] Kernel Offset: disabled [ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f [ 1406.526130] Memory Limit: none [ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic: [ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.959099] VCPU:0000000000000000 ] | ||||
| CVE-2025-40019 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Check ssize for decryption and in-place encryption Move the ssize check to the start in essiv_aead_crypt so that it's also checked for decryption and in-place encryption. | ||||
| CVE-2025-68230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gpu page fault after hibernation on PF passthrough On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a) | ||||
| CVE-2025-68231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempool: fix poisoning order>0 pages with HIGHMEM The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. | ||||
| CVE-2025-68210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: avoid infinite loop due to incomplete zstd-compressed data Currently, the decompression logic incorrectly spins if compressed data is truncated in crafted (deliberately corrupted) images. | ||||
| CVE-2025-40316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix device use-after-free on unbind A recent change fixed device reference leaks when looking up drm platform device driver data during bind() but failed to remove a partial fix which had been added by commit 80805b62ea5b ("drm/mediatek: Fix kobject put for component sub-drivers"). This results in a reference imbalance on component bind() failures and on unbind() which could lead to a user-after-free. Make sure to only drop the references after retrieving the driver data by effectively reverting the previous partial fix. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. | ||||
| CVE-2025-68194 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: make send_packet() more robust syzbot is reporting that imon has three problems which result in hung tasks due to forever holding device lock [1]. First problem is that when usb_rx_callback_intf0() once got -EPROTO error after ictx->dev_present_intf0 became true, usb_rx_callback_intf0() resubmits urb after printk(), and resubmitted urb causes usb_rx_callback_intf0() to again get -EPROTO error. This results in printk() flooding (RCU stalls). Alan Stern commented [2] that In theory it's okay to resubmit _if_ the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away. but imon has a poor error-recovery scheme which just retries forever; this behavior should be fixed. Since I'm not sure whether it is safe for imon users to give up upon any error code, this patch takes care of only union of error codes chosen from modules in drivers/media/rc/ directory which handle -EPROTO error (i.e. ir_toy, mceusb and igorplugusb). Second problem is that when usb_rx_callback_intf0() once got -EPROTO error before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge hardware after early callbacks"). Move the ictx->dev_present_intf0 test introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes until intf configured") to immediately before imon_incoming_packet(), or the first problem explained above happens without printk() flooding (i.e. hung task). Third problem is that when usb_rx_callback_intf0() is not called for some reason (e.g. flaky hardware; the reproducer for this problem sometimes prevents usb_rx_callback_intf0() from being called), wait_for_completion_interruptible() in send_packet() never returns (i.e. hung task). As a workaround for such situation, change send_packet() to wait for completion with timeout of 10 seconds. | ||||
| CVE-2025-68187 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mdio: Check regmap pointer returned by device_node_to_regmap() The call to device_node_to_regmap() in airoha_mdio_probe() can return an ERR_PTR() if regmap initialization fails. Currently, the driver stores the pointer without validation, which could lead to a crash if it is later dereferenced. Add an IS_ERR() check and return the corresponding error code to make the probe path more robust. | ||||
| CVE-2025-68738 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx() If a link does not have an assigned channel yet, mt7996_vif_link returns NULL. We still need to store the updated queue settings in that case, and apply them later. Move the location of the queue params to within struct mt7996_vif_link. | ||||
| CVE-2025-40002 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix use-after-free in tb_dp_dprx_work The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(), which does not ensure that the delayed work item tunnel->dprx_work has fully completed if it was already running. This leads to use-after-free scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while tunnel->dprx_work remains active and attempts to dereference tb_tunnel in tb_dp_dprx_work(). A typical race condition is illustrated below: CPU 0 | CPU 1 tb_dp_tunnel_active() | tb_deactivate_and_free_tunnel()| tb_dp_dprx_start() tb_tunnel_deactivate() | queue_delayed_work() tb_dp_activate() | tb_dp_dprx_stop() | tb_dp_dprx_work() //delayed worker cancel_delayed_work() | tb_tunnel_put(tunnel); | | tunnel = container_of(...); //UAF | tunnel-> //UAF Replacing cancel_delayed_work() with cancel_delayed_work_sync() is not feasible as it would introduce a deadlock: both tb_dp_dprx_work() and the cleanup path acquire tb->lock, and cancel_delayed_work_sync() would wait indefinitely for the work item that cannot proceed. Instead, implement proper reference counting: - If cancel_delayed_work() returns true (work is pending), we release the reference in the stop function. - If it returns false (work is executing or already completed), the reference is released in delayed work function itself. This ensures the tb_tunnel remains valid during work item execution while preventing memory leaks. This bug was found by static analysis. | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||