Export limit exceeded: 397050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 397050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 397050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 397050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397050 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-75608 | 1 Blakeblackshear | 1 Frigate | 2026-09-22 | 7.7 High |
| Frigate is an open source network video recorder. Prior to 0.18.0, the prefix-matched location /api/go2rtc/api in docker/main/rootfs/usr/local/nginx/conf/nginx.conf requires authentication but does not require an administrator role for GET requests, exposing the proxied go2rtc API to viewer users. An authenticated viewer can request the streams, config, log, and stack subpaths to obtain internal addresses, configuration paths, application logs, goroutine stack data, and RTSP stream URLs that may contain camera credentials. Non-GET methods remain blocked by limit_except GET. This issue is fixed in version 0.18.0. | ||||
| CVE-2026-88010 | 1 Traefik | 1 Traefik | 2026-09-22 | N/A |
| Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.7.13, checkPassword in pkg/middlewares/auth/basic_auth.go constructs the BasicAuth singleflight key from the submitted password and stored secret. Concurrent requests for absent usernames therefore coalesce on one key while configured usernames perform separate password hashes, creating an unauthenticated timing discrepancy that reveals whether a username exists. Sequential checks remain cost-equalized, Traefik v2 and Digest authentication are not affected, and the issue does not disclose credentials or bypass authentication. This issue is fixed in version 3.7.13. | ||||
| CVE-2026-63374 | 1 Agronholm | 1 Anyio | 2026-09-22 | N/A |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. Prior to 4.14.2, connect_tcp() and TLSStream.wrap() can validate internationalized host names after the standard library converts them with IDNA 2003 instead of IDNA 2008. When a connection to a non-ASCII domain is hijacked or redirected, an attacker can obtain a legitimate certificate for the different ASCII hostname produced by IDNA 2003 and present it to the client, causing the malicious endpoint's certificate to validate. This issue is fixed in version 4.14.2. | ||||
| CVE-2026-77633 | 1 Cloudreve | 1 Cloudreve | 2026-09-22 | 7.1 High |
| Cloudreve is a self-hosted file management and sharing system. Prior to 4.18.0, PrepareUpload in pkg/filemanager/fs/dbfs/upload.go checks a stale in-memory user storage value through validateUserCapacity and later applies an unconditional storage charge outside the same quota-enforcing transaction. An authenticated user with Files.Write permission can issue concurrent upload-session requests that read the same capacity snapshot, all pass the MaxStorage check, and reserve their declared sizes through CommitWithStorageDiff. The resulting reservations can exceed the account quota and can be materialized as chunked uploads that exhaust host storage and deny uploads to other users. The default local-storage policy and default User group are affected. This issue is fixed in version 4.18.0. | ||||
| CVE-2026-71219 | 1 Redhat | 2 Enterprise Linux, Gfs2-utils | 2026-09-22 | 4.7 Medium |
| A stack overflow vulnerability was found in gfs2-utils. The hash table traversal code in metawalk.c uses alloca() with an exponentially-derived size from the untrusted on-disk di_depth field without bounds validation. A crafted GFS2 filesystem image with a large di_depth value causes stack exhaustion and a denial of service when processed by fsck.gfs2, gfs2_edit, or savemeta. | ||||
| CVE-2026-84963 | 1 Mongodb | 1 C Driver | 2026-09-22 | 5.3 Medium |
| An incorrect numeric conversion in the JSON parsing component of the MongoDB C Driver's BSON library may cause an unusually large text value to be silently shortened, or the corresponding field to be omitted, while the parsing operation still reports success and returns no error. An unauthenticated party who can supply the input processed by an application that uses this component may cause that application to hold data that does not match what was submitted, which may result in unintended alteration of data. | ||||
| CVE-2026-84964 | 1 Mongodb | 1 C Driver | 2026-09-22 | 5.9 Medium |
| A double free in the OpenSSL-based TLS certificate revocation checking path of the MongoDB C Driver can be reached by a TLS endpoint that the client already trusts. During the handshake, specially formed certificate data can cause the same heap object to be released twice. An unauthenticated party acting as the trusted endpoint may cause the connecting client application to terminate unexpectedly. | ||||
| CVE-2026-95697 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP contains an authorization flaw in the Organisation model's captureOrg method. When the $force parameter is set to true, the method unconditionally overwrites organization metadata fields without verifying that the invoking user holds sufficient privileges. A user with a sharing group (SG) editor role can trigger this code path, allowing them to modify organization metadata that should be restricted to site administrators or users with sync permissions. According to the commit message, this could lead to blueprint-based sharing group manipulation, meaning an attacker with SG editor access could alter organizational attributes in ways that influence how sharing groups and blueprints behave across the MISP instance. The vulnerability requires an authenticated user with at least SG editor privileges and network access to the MISP web interface. The impact is primarily on the integrity of organization records and, potentially, on the integrity of sharing group configurations derived from those records. | ||||
| CVE-2026-95693 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| In MISP, the EventReport::uploadPicture method in processed a caller-supplied tmp_name field by invoking file_exists(), mime_content_type(), and exif_imagetype() on the supplied path before verifying that the value was a genuine PHP upload via is_uploaded_file(). An authenticated user holding the perm_add permission could supply an arbitrary filesystem path as the tmp_name value. The application would then probe that path and return distinct validation error messages depending on whether the file existed, its MIME type, or its image format. By observing the differing error responses, an attacker could enumerate the existence of files at arbitrary paths on the MISP server and determine their type. This constitutes an information disclosure vulnerability: the server's filesystem layout and file types are leaked to any user with the perm_add role without requiring administrative access. The vulnerability does not allow reading file contents, writing files, or executing code, but it can aid further attacks by revealing sensitive file locations (e.g., configuration files, private keys, or other artifacts) present on the host. | ||||
| CVE-2026-95685 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP contains an access control flaw in the EventReports functionality. The replaceSuggestionInReport action, which allows modification of suggestion content within an event report, was incorrectly mapped to the wildcard permission ('*') in the ACLComponent, making it accessible to any authenticated user regardless of their assigned permissions. All analogous report-modification actions correctly required the perm_add permission, while read-only actions such as downloadAsPDF appropriately used the wildcard. An authenticated user without the perm_add permission could invoke the replaceSuggestionInReport endpoint to alter report suggestion data, violating the intended authorization model. This constitutes an improper authorization weakness that could lead to unauthorized modification of event report content, potentially corrupting shared threat intelligence data or injecting misleading information into reports relied upon by other analysts and automated consumers. | ||||
| CVE-2026-95683 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| In MISP, the Overmind event view enriches an event with its most recent attached report for preview purposes. The enrichment logic fetched the report using only the event ID as the lookup condition, without applying the report's own distribution/ACL constraints. Because MISP reports carry an independent distribution setting that can be more restrictive than the parent event's distribution, an authenticated user who had read access to the event could retrieve and view a report whose distribution explicitly excluded that user. Additionally, the query did not filter out soft-deleted reports, allowing retrieval of reports that had been administratively removed. The result is an unauthorized disclosure of threat-intelligence report content to users who should not have access under the report's own access-control policy. The vulnerability requires an authenticated MISP user with at least read access to the affected event. | ||||
| CVE-2026-95679 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP's RequestHandlerComponent automatically decodes XML request bodies on all write requests. The underlying Xml::build() library contains a logic error in its readFile guard condition (readFile && http || https), where PHP operator precedence causes the https branch to bypass the readFile check entirely. As a result, a request body containing a bare HTTPS URL is treated as a locator and fetched by the server. Because the cspReport endpoint accepts XML content type and is unauthenticated by design, an unauthenticated remote attacker can send a POST request with a crafted XML body to cause the MISP server to issue an outbound HTTPS request to an arbitrary target reachable from the server. The attacker does not receive the response body, but can use the vulnerability to probe internal services, trigger actions on internal HTTPS endpoints, or perform timing-based reconnaissance of the server's network environment. The vulnerability affects any MISP deployment where the cspReport endpoint is reachable and the server has network access to internal or external HTTPS services. | ||||
| CVE-2026-95674 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| In MISP, the queryEnrichment method in EventsController.php accepted a module name parameter and iterated over the list of enabled modules to find a match. If the specified module was not present in the enabled modules list, the code silently continued processing using default parameters (format set to 'simplified' and no module-specific configuration applied) rather than rejecting the request. This allowed an authenticated user to trigger enrichment or analysis processing through a module that was not explicitly enabled or available on the instance, bypassing the intended module availability controls. The lack of validation meant that module names outside the enabled set were not rejected, potentially exposing functionality or data processing paths that the administrator had not authorized for use. | ||||
| CVE-2026-95671 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| In MISP, the CollectionsController add() method enforced the sharing-group usability authorization check and element capture only when the HTTP request method was POST. However, the underlying CRUDComponent::add() method persists data on both POST and PUT requests. As a result, an authenticated user could issue a PUT request to the collections/add endpoint, bypassing the sharing-group authorization check entirely. This allowed the creation of a collection with distribution=4 (shared with a specific sharing group) targeting a sharing group that the user was not authorized to use. The bypassed check would normally verify that the current user has access to the specified sharing group before allowing the collection to be associated with it. The security impact is that an authenticated user can place collection data into a sharing group context they do not have legitimate access to, potentially exposing that data to all members of the unauthorized sharing group and violating the intended access-control boundaries of the MISP instance. The vulnerability requires an authenticated session and knowledge of a valid sharing group identifier; no user interaction or special tooling is needed beyond sending a PUT request instead of a POST request to the same endpoint. | ||||
| CVE-2026-95667 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| The MISP installer scripts (for Debian 12, Debian 13, Ubuntu 24.04, and RHEL 9.4) create a log file at /var/log/misp_install.log and a named pipe (FIFO) at /var/log/misp_install.log.pipe to capture all installer output. The log captures highly sensitive data including the generated admin password, database passwords, GPG passphrase, and supervisor password. However, the log file was created by the tee command under the system default umask, resulting in world-readable permissions (typically 0644). Similarly, the FIFO was created with mkfifo without an explicit mode, also inheriting the default umask and remaining world-readable during the window before it was unlinked. Any local unprivileged user on the system could read the log file or the FIFO to obtain these credentials. Additionally, the log file was not removed before creation, meaning a pre-existing symlink in /var/log could have been used to redirect the write to an arbitrary location. Version affected: <2.5.47 | ||||
| CVE-2026-95661 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP contains a reflected cross-site scripting (XSS) vulnerability in the attribute histogram view. The $selectedTypes variable, which is derived from the URL path segment , was interpolated directly into a JavaScript array literal inside an onClick HTML attribute without any encoding or escaping. An attacker who can cause an authenticated MISP user to visit a crafted URL containing a malicious type value can execute arbitrary JavaScript in the victim's browser within the MISP application origin. Successful exploitation allows the attacker to read session cookies, perform actions on behalf of the victim, or exfiltrate sensitive data accessible from the MISP interface. The vulnerability requires the victim to be authenticated and to actively navigate to the attacker-supplied URL. | ||||
| CVE-2026-95659 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP contains a reflected cross-site scripting (XSS) vulnerability in the AnalystDataController::viewForObject action. The method accepted a parent object type parameter from the URL without validation and passed it to the Overmind-themed AnalystData thread view element, where it was interpolated into two translated strings and rendered into the HTML response without output encoding. An authenticated attacker who can induce a victim to navigate to a crafted URL can inject arbitrary JavaScript that executes in the victim's browser within the MISP application context. This may allow the attacker to read session data, manipulate the page, or perform actions on behalf of the victim. The vulnerability requires the victim to be authenticated to MISP and to actively visit the attacker-supplied URL. The affected component is the AnalystData controller and the Overmind theme's AnalystData thread element. Version affected: <2.5.47 | ||||
| CVE-2026-95658 | 1 Misp | 1 Misp | 2026-09-22 | N/A |
| MISP's WorkflowsController exposed the moduleStatelessExecution action in the Security component's unlockedActions list. In CakePHP, listing an action in unlockedActions disables both the CSRF token check and the field hash validation for that action. Because moduleStatelessExecution executes a workflow module's exec() method with caller-supplied input and parameters, the absence of CSRF protection allowed an attacker to craft a cross-site form post (or equivalent cross-origin request) that, when submitted by an authenticated site administrator, would cause the administrator's browser to invoke the action on the MISP instance. The attacker could select any workflow module to execute, including action modules that write blocklist and warninglist entries, and supply arbitrary input and parameters of their choosing. This constitutes a cross-site request forgery (CSRF) vulnerability with high integrity impact on the MISP instance's security-related data. The vulnerability was identified during an internal security review and was not externally reported. The fix is included in MISP v2.5.47. | ||||
| CVE-2026-94152 | 1 Omega Solution | 1 Fbp Fulfillment By People | 2026-09-22 | 4.3 Medium |
| A security vulnerability has been detected in Omega Solution FBP Fulfillment by People 2025. This impacts an unknown function of the file /user/ of the component User Profile API. The manipulation of the argument ID leads to authorization bypass. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-94146 | 1 Biostar | 1 Bios Update Utility | 2026-09-22 | 8.8 High |
| A vulnerability was found in BioStar BIOS Update Utility 1.9.7.3. This issue affects the function sub_110BC of the file BSMEM64_W10.sys of the component IOCTL Handler. The manipulation of the argument PhysicalAddress/Size results in write-what-where condition. Attacking locally is a requirement. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||