Export limit exceeded: 16424 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16424 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46050 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-46018 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES parse_uac2_sample_rate_range() caps the number of enumerated rates at MAX_NR_RATES, but it only breaks out of the current rate loop. A malformed UAC2 RANGE response with additional triplets continues parsing the remaining triplets and repeatedly prints "invalid uac2 rates" while probe still holds register_mutex. Stop the whole parse once the cap is reached and return the number of rates collected so far. | ||||
| CVE-2026-43496 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked When red qdisc has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (red). And herein lies the problem. - red will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full) [ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq] [ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d [ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216 [ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048 [ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078 [ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000 [ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200 [ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000 [ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0 [ 78.671585][ T363] PKRU: 55555554 [ 78.671713][ T363] Call Trace: [ 78.671843][ T363] <TASK> [ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq] [ 78.672148][ T363] ? __pfx__printk+0x10/0x10 [ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0 [ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0 [ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red] [ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf] [ 78.673566][ T363] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead. | ||||
| CVE-2026-43080 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32) writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1) It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP encapsulation, and l2tp_xmit_core doesn't check for overflows when it assigns the UDP length field. The value gets trimmed to 16 bites. Add an overflow check that drops oversized packets and avoids sending packets with trimmed UDP length to the wire. syzbot's stack trace (with my patch applied): len >= 65536u WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957 Modules linked in: CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline] RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline] RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327 Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f RSP: 0018:ffffc90003d67878 EFLAGS: 00010293 RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000 RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004 R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900 R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000 FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0 Call Trace: <TASK> pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x503/0x550 net/socket.c:1195 do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1 vfs_writev+0x33c/0x990 fs/read_write.c:1059 do_writev+0x154/0x2e0 fs/read_write.c:1105 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f636479c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629 RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0 </TASK> [1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/ | ||||
| CVE-2026-33389 | 1 Nozomi Networks | 3 Arc, Cmc, Guardian | 2026-10-15 | 7.5 High |
| An improper certificate/host key validation vulnerability was discovered in the Smart Polling functionality, which established encrypted connections to target devices without validating the remote host's identity, and no option was provided to enable it. A man-in-the-middle attacker positioned between a sensor and a polled device can, during a polling session, impersonate the device and intercept the communication, including the credentials used to access it. The captured credentials can then be replayed to authenticate against the device itself or against other devices sharing the same credentials, allowing the attacker to access and tamper with the device's data and to disrupt its operations. | ||||
| CVE-2026-31629 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through. | ||||
| CVE-2026-27135 | 1 Nghttp2 | 1 Nghttp2 | 2026-10-15 | 7.5 High |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. Prior to version 1.68.1, the nghttp2 library stops reading the incoming data when user facing public API `nghttp2_session_terminate_session` or `nghttp2_session_terminate_session2` is called by the application. They might be called internally by the library when it detects the situation that is subject to connection error. Due to the missing internal state validation, the library keeps reading the rest of the data after one of those APIs is called. Then receiving a malformed frame that causes FRAME_SIZE_ERROR causes assertion failure. nghttp2 v1.68.1 adds missing state validation to avoid assertion failure. No known workarounds are available. | ||||
| CVE-2026-23356 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off. | ||||
| CVE-2026-23111 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones. | ||||
| CVE-2025-71079 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write A deadlock can occur between nfc_unregister_device() and rfkill_fop_write() due to lock ordering inversion between device_lock and rfkill_global_mutex. The problematic lock order is: Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lock Thread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev) rfkill_unregister() mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex This creates a classic ABBA deadlock scenario. Fix this by moving rfkill_unregister() and rfkill_destroy() outside the device_lock critical section. Store the rfkill pointer in a local variable before releasing the lock, then call rfkill_unregister() after releasing device_lock. This change is safe because rfkill_fop_write() holds rfkill_global_mutex while calling the rfkill callbacks, and rfkill_unregister() also acquires rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will wait for any ongoing callback to complete before proceeding, and device_del() is only called after rfkill_unregister() returns, preventing any use-after-free. The similar lock ordering in nfc_register_device() (device_lock -> rfkill_global_mutex via rfkill_register) is safe because during registration the device is not yet in rfkill_list, so no concurrent rfkill operations can occur on this device. | ||||
| CVE-2025-39773 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix soft lockup in br_multicast_query_expired() When set multicast_query_interval to a large value, the local variable 'time' in br_multicast_send_query() may overflow. If the time is smaller than jiffies, the timer will expire immediately, and then call mod_timer() again, which creates a loop and may trigger the following soft lockup issue. watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66] CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none) Call Trace: <IRQ> __netdev_alloc_skb+0x2e/0x3a0 br_ip6_multicast_alloc_query+0x212/0x1b70 __br_multicast_send_query+0x376/0xac0 br_multicast_send_query+0x299/0x510 br_multicast_query_expired.constprop.0+0x16d/0x1b0 call_timer_fn+0x3b/0x2a0 __run_timers+0x619/0x950 run_timer_softirq+0x11c/0x220 handle_softirqs+0x18e/0x560 __irq_exit_rcu+0x158/0x1a0 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> This issue can be reproduced with: ip link add br0 type bridge echo 1 > /sys/class/net/br0/bridge/multicast_querier echo 0xffffffffffffffff > /sys/class/net/br0/bridge/multicast_query_interval ip link set dev br0 up The multicast_startup_query_interval can also cause this issue. Similar to the commit 99b40610956a ("net: bridge: mcast: add and enforce query interval minimum"), add check for the query interval maximum to fix this issue. | ||||
| CVE-2025-38614 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: Fix semi-unbounded recursion Ensure that epoll instances can never form a graph deeper than EP_MAX_NESTS+1 links. Currently, ep_loop_check_proc() ensures that the graph is loop-free and does some recursion depth checks, but those recursion depth checks don't limit the depth of the resulting tree for two reasons: - They don't look upwards in the tree. - If there are multiple downwards paths of different lengths, only one of the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths"). Essentially, the current recursion depth check in ep_loop_check_proc() just serves to prevent it from recursing too deeply while checking for loops. A more thorough check is done in reverse_path_check() after the new graph edge has already been created; this checks, among other things, that no paths going upwards from any non-epoll file with a length of more than 5 edges exist. However, this check does not apply to non-epoll files. As a result, it is possible to recurse to a depth of at least roughly 500, tested on v6.15. (I am unsure if deeper recursion is possible; and this may have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion problem").) To fix it: 1. In ep_loop_check_proc(), note the subtree depth of each visited node, and use subtree depths for the total depth calculation even when a subtree has already been visited. 2. Add ep_get_upwards_depth_proc() for similarly determining the maximum depth of an upwards walk. 3. In ep_loop_check(), use these values to limit the total path length between epoll nodes to EP_MAX_NESTS edges. | ||||
| CVE-2025-21859 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler. | ||||
| CVE-2025-0725 | 3 Haxx, Netapp, Zlib | 12 Curl, Libcurl, Hci Baseboard Management Controller and 9 more | 2026-10-15 | 7.3 High |
| When libcurl is asked to perform automatic gzip decompression of content-encoded HTTP responses with the `CURLOPT_ACCEPT_ENCODING` option, **using zlib 1.2.0.3 or older**, an attacker-controlled integer overflow would make libcurl perform a buffer overflow. | ||||
| CVE-2024-58071 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: team: prevent adding a device which is already a team device lower Prevent adding a device which is already a team device lower, e.g. adding veth0 if vlan1 was already added and veth0 is a lower of vlan1. This is not useful in practice and can lead to recursive locking: $ ip link add veth0 type veth peer name veth1 $ ip link set veth0 up $ ip link set veth1 up $ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1 $ ip link add team0 type team $ ip link set veth0.1 down $ ip link set veth0.1 master team0 team0: Port device veth0.1 added $ ip link set veth0 down $ ip link set veth0 master team0 ============================================ WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted -------------------------------------------- ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(team->team_lock_key); lock(team->team_lock_key); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/7684: stack backtrace: CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_deadlock_bug.cold (kernel/locking/lockdep.c:3040) __lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226) ? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548) lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2)) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? lock_acquire (kernel/locking/lockdep.c:5822) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) __mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? fib_sync_up (net/ipv4/fib_semantics.c:2167) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) __dev_notify_flags (net/core/dev.c:8993) ? __dev_change_flags (net/core/dev.c:8975) dev_change_flags (net/core/dev.c:9027) vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470) ? br_device_event (net/bridge/br.c:143) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) dev_open (net/core/dev.c:1519 net/core/dev.c:1505) team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977) ? __pfx_team_add_slave (drivers/net/team/team_core.c:1972) do_set_master (net/core/rtnetlink.c:2917) do_setlink.isra.0 (net/core/rtnetlink.c:3117) | ||||
| CVE-2024-57977 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memcg: fix soft lockup in the OOM process A soft lockup issue was found in the product with about 56,000 tasks were in the OOM cgroup, it was traversing them when the soft lockup was triggered. watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066] CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G Hardware name: Huawei Cloud OpenStack Nova, BIOS RIP: 0010:console_unlock+0x343/0x540 RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247 RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0 R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vprintk_emit+0x193/0x280 printk+0x52/0x6e dump_task+0x114/0x130 mem_cgroup_scan_tasks+0x76/0x100 dump_header+0x1fe/0x210 oom_kill_process+0xd1/0x100 out_of_memory+0x125/0x570 mem_cgroup_out_of_memory+0xb5/0xd0 try_charge+0x720/0x770 mem_cgroup_try_charge+0x86/0x180 mem_cgroup_try_charge_delay+0x1c/0x40 do_anonymous_page+0xb5/0x390 handle_mm_fault+0xc4/0x1f0 This is because thousands of processes are in the OOM cgroup, it takes a long time to traverse all of them. As a result, this lead to soft lockup in the OOM process. To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks' function per 1000 iterations. For global OOM, call 'touch_softlockup_watchdog' per 1000 iterations to avoid this issue. | ||||
| CVE-2024-57924 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: relax assertions on failure to encode file handles Encoding file handles is usually performed by a filesystem >encode_fh() method that may fail for various reasons. The legacy users of exportfs_encode_fh(), namely, nfsd and name_to_handle_at(2) syscall are ready to cope with the possibility of failure to encode a file handle. There are a few other users of exportfs_encode_{fh,fid}() that currently have a WARN_ON() assertion when ->encode_fh() fails. Relax those assertions because they are wrong. The second linked bug report states commit 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") in v6.6 as the regressing commit, but this is not accurate. The aforementioned commit only increases the chances of the assertion and allows triggering the assertion with the reproducer using overlayfs, inotify and drop_caches. Triggering this assertion was always possible with other filesystems and other reasons of ->encode_fh() failures and more particularly, it was also possible with the exact same reproducer using overlayfs that is mounted with options index=on,nfs_export=on also on kernels < v6.6. Therefore, I am not listing the aforementioned commit as a Fixes commit. Backport hint: this patch will have a trivial conflict applying to v6.6.y, and other trivial conflicts applying to stable kernels < v6.6. | ||||
| CVE-2024-56770 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics. | ||||
| CVE-2024-56719 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO DMA API usage causing oops Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit(). The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as "des" is offset by proto_hdr_len. This causes problems such as: dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed and with DMA_API_DEBUG enabled: DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes] Fix this by maintaining "des" as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator(). Full details of the crashes can be found at: https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ | ||||
| CVE-2026-14905 | 1 Ibm | 5 Datapower Gateway, Datapower Gateway 1050, Datapower Gateway 1060 and 2 more | 2026-10-15 | 8.2 High |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. | ||||