| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Snowflake ODBC Driver before 3.7.0, in certain code paths, the Driver logged the whole SQL query at the INFO level, aka Insertion of Sensitive Information into a Log File. |
| A security issue was discovered in azure-file-csi-driver where an actor with access to the driver logs could observe service account tokens. These tokens could then potentially be exchanged with external cloud providers to access secrets stored in cloud vault solutions. Tokens are only logged when TokenRequests is configured in the CSIDriver object and the driver is set to run at log level 2 or greater via the -v flag. |
| An information disclosure vulnerability exists in Yugabyte Anywhere, where the LDAP bind password is logged in plaintext within application logs. This flaw results in the unintentional exposure of sensitive information in Yugabyte Anywhere logs, potentially allowing unauthorized users with access to these logs to view the LDAP bind password. An attacker with log access could exploit this vulnerability to gain unauthorized access to the LDAP server, leading to potential exposure or compromise of LDAP-managed resources
This issue affects YugabyteDB Anywhere: from 2.20.0.0 before 2.20.7.0, from 2.23.0.0 before 2.23.1.0, from 2024.1.0.0 before 2024.1.3.0. |
| In some circumstances, debug artifacts uploaded by the CodeQL Action after a failed code scanning workflow run may contain the environment variables from the workflow run, including any secrets that were exposed as environment variables to the workflow. Users with read access to the repository would be able to access this artifact, containing any secrets from the environment. This vulnerability is patched in CodeQL Action version 3.28.3 or later, or CodeQL CLI version 2.20.3 or later.
For some affected workflow runs, the exposed environment variables in the debug artifacts included a valid `GITHUB_TOKEN` for the workflow run, which has access to the repository in which the workflow ran, and all the permissions specified in the workflow or job. The `GITHUB_TOKEN` is valid until the job completes or 24 hours has elapsed, whichever comes first.
Environment variables are exposed only from workflow runs that satisfy all of the following conditions:
- Code scanning workflow configured to scan the Java/Kotlin languages.
- Running in a repository containing Kotlin source code.
- Running with debug artifacts enabled.
- Using CodeQL Action versions <= 3.28.2, and CodeQL CLI versions >= 2.9.2 (May 2022) and <= 2.20.2.
- The workflow run fails before the CodeQL database is finalized within the `github/codeql-action/analyze` step.
- Running in any GitHub environment: GitHub.com, GitHub Enterprise Cloud, and GitHub Enterprise Server. Note: artifacts are only accessible to users within the same GitHub environment with access to the scanned repo.
The `GITHUB_TOKEN` exposed in this way would only have been valid for workflow runs that satisfy all of the following conditions, in addition to the conditions above:
- Using CodeQL Action versions >= 3.26.11 (October 2024) and <= 3.28.2, or >= 2.26.11 and < 3.
- Running in GitHub.com or GitHub Enterprise Cloud only (not valid on GitHub Enterprise Server).
In rare cases during advanced setup, logging of environment variables may also occur during database creation of Java, Swift, and C/C++. Please read the corresponding CodeQL CLI advisory GHSA-gqh3-9prg-j95m for more details.
In CodeQL CLI versions >= 2.9.2 and <= 2.20.2, the CodeQL Kotlin extractor logs all environment variables by default into an intermediate file during the process of creating a CodeQL database for Kotlin code. This is a part of the CodeQL CLI and is invoked by the CodeQL Action for analyzing Kotlin repositories.
On Actions, the environment variables logged include GITHUB_TOKEN, which grants permissions to the repository being scanned.
The intermediate file containing environment variables is deleted when finalizing the database, so it is not included in a successfully created database. It is, however, included in the debug artifact that is uploaded on a failed analysis run if the CodeQL Action was invoked in debug mode.
Therefore, under these specific circumstances (incomplete database creation using the CodeQL Action in debug mode) an attacker with access to the debug artifact would gain unauthorized access to repository secrets from the environment, including both the `GITHUB_TOKEN` and any user-configured secrets made available via environment variables.
The impact of the `GITHUB_TOKEN` leaked in this environment is limited:
- For workflows on GitHub.com and GitHub Enterprise Cloud using CodeQL Action versions >= 3.26.11 and <= 3.28.2, or >= 2.26.11 and < 3, which in turn use the `actions/artifacts v4` library, the debug artifact is uploaded before the workflow job completes. During this time the `GITHUB_TOKEN` is still valid, providing an opportunity for attackers to gain access to the repository.
- For all other workflows, the debug artifact is uploaded after the workflow job completes, at which point the leaked `GITHUB_TOKEN` has been revoked and cannot be used to access the repository. |
| Shared Access Signature token is not masked in the backup configuration response and is also exposed in the yb_backup logs |
| Kubernetes secrets-store-sync-controller in versions before 0.0.2 discloses service account tokens in logs. |
| Fujitsu / Fsas Technologies ETERNUS SF ACM/SC/Express (DX / AF Management Software) before 16.8-16.9.1 PA 2025-12, when collected maintenance data is accessible by a principal/authority other than ETERNUS SF Admin, allows an attacker to potentially affect system confidentiality, integrity, and availability. |
| Insertion of sensitive information into log file issue exists in "region PAY" App for Android prior to 1.5.28. If exploited, sensitive user information may be exposed to an attacker who has access to the application logs. |
| Hitachi Ops Center Common Services within Hitachi Ops Center OVA contains an information exposure vulnerability.
This issue affects Hitachi Ops Center Common Services: from 11.0.3-00 before 11.0.4-00. |
| The AuthKit library for Remix provides convenient helpers for authentication and session management using WorkOS & AuthKit with Remix. In affected versions refresh tokens are logged to the console when the disabled by default `debug` flag, is enabled. This issue has been patched in version 0.4.1. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability has been identified in SINUMERIK 828D V4 (All versions < V4.95 SP3), SINUMERIK 840D sl V4 (All versions < V4.95 SP3 in connection with using Create MyConfig (CMC) <= V4.8 SP1 HF6), SINUMERIK ONE (All versions < V6.23 in connection with using Create MyConfig (CMC) <= V6.6), SINUMERIK ONE (All versions < V6.15 SP4 in connection with using Create MyConfig (CMC) <= V6.6). Affected systems, that have been provisioned with Create MyConfig (CMC), contain a Insertion of Sensitive Information into Log File vulnerability. This could allow a local authenticated user with low privileges to read sensitive information and thus circumvent access restrictions. |
| apko is an apk-based OCI image builder. apko exposures HTTP basic auth credentials from repository and keyring URLs in log output. This vulnerability is fixed in v0.14.5. |
| Insertion of sensitive information into log file for some Intel(R) Local Manageability Service software before version 2316.5.1.2 may allow an authenticated user to potentially enable information disclosure via local access. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Starting in version 0.7.0 and prior to versions 0.7.15 and 0.8.3, Himmelblau is vulnerable to leaking credentials in debug logs. When debug logging is enabled, user access tokens are inadvertently logged, potentially exposing sensitive authentication data. Similarly, Kerberos Ticket-Granting Tickets (TGTs) are logged when debug logging is enabled. Both issues pose a risk of exposing sensitive credentials, particularly in environments where debug logging is enabled. Himmelblau versions 0.7.15 and 0.8.3 contain a patch that fixes both issues. Some workarounds are available for users who are unable to upgrade. For the **logon compliance script issue**, disable the `logon_script` option in `/etc/himmelblau/himmelblau.conf`, and avoid using the `-d` flag when starting the `himmelblaud` daemon. For the Kerberos CCache issue, one may disable debug logging globally by setting the `debug` option in `/etc/himmelblau/himmelblau.conf` to `false` and avoiding the `-d` parameter when starting `himmelblaud`. |
| spaces_plugin/app.py in SolidUI 0.4.0 has an unnecessary print statement for an OpenAI key. The printed string might be logged. |
| Insertion of Sensitive Information into Log File vulnerability in Octolize USPS Shipping for WooCommerce – Live Rates.This issue affects USPS Shipping for WooCommerce – Live Rates: from n/a through 1.9.4. |
| kanidim-provision is a helper utility that uses kanidm's API to provision users, groups and oauth2 systems. Prior to version 1.2.0, a faulty function intrumentation in the (optional) kanidm patches provided by kandim-provision will cause the provisioned admin credentials to be leaked to the system log. This only impacts users which both use the provided patches and provision their `admin` or `idm_admin` account credentials this way. No other credentials are affected. Users should recompile kanidm with the newest patchset from tag `v1.2.0` or higher. As a workaround, the user can set the log level `KANIDM_LOG_LEVEL` to any level higher than `info`, for example `warn`. |
| Under certain circumstances unnecessary user details are provided within system logs |
| The sessions are stored in clear-text logs. An attacker can retrieve authentication sessions. A remote attacker can retrieve the credentials and bypass the authentication mechanism. As for the affected products/models/versions, see the reference URL. |
| Under certain log settings the IAM or CORE service will log credentials in the iam logfile in Fortra Application Hub (Formerly named Helpsystems One) prior to version 1.3 |
